Mr Ching Choon Siong
Ms Melissa Khoo
Ms Ch'ng Yee Chuin
Ms Puteri Liyana Binti Roslan
Ms Nur Farah Aliyah Binti Muhamad Zahari
Ms Wendy Lim
| Abbott Penang (St. Jude Medical Operations (Malaysia) Sdn. Bhd) www.abbott.com |
 |
COMPANY NAME & ADDRESS
Abbott Penang
Plot 102, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Industrial Zone,
Penang, Malaysia
Tel: 04-810 1000
Fax: 04-810 1001
Parent company: USA
Membership: Full
WHAT WE DO
Abbott’s manufacturing facility in Bayan Lepas, Penang, established in 2009, specializes in producing high-tech, life-saving cardiovascular devices, including pacemakers, implantable cardioverter defibrillators (ICDs), and cardiac monitoring leads
| Ambu Sdn Bhd www.ambu.com |
 |
ADDRESS
Lot 69B Lintang Bayan Lepas 6 Phase IV,
11900 Penang, Malaysia
Tel: 04-252 9000
Fax: 04-644 8932
Parent company: Denmark
Membership: Full
WHAT WE DO
The Penang facility is responsible for producing single-use endoscopes (pulmonology, urology, ENT, GI) and other medical devices, shipping millions of units globally.
ADDRESS
Prima 6, Prima Avenue, Block 3512,
Jalan Teknokrat 6, 63000
Cyberjaya, Malaysia.
Tel: 03-8310 6688
Fax: 03-8318 6699
Parent company: Australia
Membership: Full
WHAT WE DO
Ansell Malaysia (Ansell N.P. Sdn. Bhd./Ansell Global Trading Center) is a major manufacturing and commercial hub for Ansell Limited, a global leader in personal protection solutions.
We manufacture, develop, and distribute high-performance protective gloves, garments, and safety products for the healthcare, industrial, chemical, and life sciences sectors.
Medical Device products include sterile surgical gloves, single-use examination gloves, and operating room consumables for hospitals and clinics.
|
Amcor Flexibles Asia Pacific
(Bemis Asia Pacific Sdn Bhd)
www.amcor.com |
 |
ADDRESS
Lot 823, Jalan Subang 5, Taman Perindustrian Subang USJ 1,
47600 Subang Jaya, Selangor, Malaysia.
Tel: 03- 8021 0998 (General Line)
Fax: 03- 8021 0000
Parent company: USA
Membership: Full
WHAT WE DO
Amcor Malaysia is a key hub for Amcor Flexibles Asia Pacific, specializing in developing and manufacturing advanced healthcare packaging solutions. The company produces medical-grade packaging, including sterile barrier systems, pouches, and top/bottom substrates for medical devices, pharmaceuticals, and diagnostics.
| Ain Medicare Sdn Bhd www.ainmedicare.com.my |
 |
ADDRESS
Jalan 6/44, Kawasan Perindustrian Pengkalan Chepa 2,
Kota Bharu 16100, Kelantan.
Tel : +609 7743 388
Fax : +609 7742 205
Parent company: Malaysia
Membership: Full
WHAT WE DO
Ain Medicare is a leading manufacturer of sterile pharmaceutical products. They specialize in producing intravenous infusions, hemodialysis concentrates, peritoneal dialysis solutions, and small-volume injections for healthcare, including Blow-Fill-Seal (BFS) technology and contract manufacturing (OEM).
| Allen Healthcare Products (M) Sdn Bhd www.ahpbio.com |
 |
ADDRESS
17, Lorong Nagasari 2, Taman Nagasari,
13600, Perai Penang, Malaysia
Tel: 604-3901168
Fax: 604-3831334
Parent company: Malaysia
Membership: Full
WHAT WE DO
Allen Healthcare Products (AHP) is a biotechnology company established in 1996 that specializes in manufacturing and supplying in-vitro diagnostics (IVD) and rapid, point-of-care (POC) test kits. Their product range includes infectious disease, fertility, and drug-of-abuse tests (e.g., HIV, Hepatitis B, Dengue, Malaria).
ADDRESS
28-32 Jalan Teluk Batu 36/2, Batu 4 1/2,
Jalan Kebun, Seksyen 36, 40470 Shah Alam,
Selangor, Malaysia.
Tel: 03-5162 2618
Fax: 03-5162 2619
Parent company: Malaysia
Membership: Full
WHAT WE DO
A.P.S Medical manufactures and distributes single-use, disposable medical devices. The company specializes in producing surgical, anesthetic, respiratory, and gastroenterology products, such as suction tubes, extension tubes, and mucus extractors, operating within a Class 100K clean room.
| Balchem Sdn Bhd www.balchem.com |
 |
ADDRESS
37, Lorong Sungai Puloh 1A/KU6,
Taman Teknologi Gemilang, Kawasan Perindustrian Sungai Puloh,
41050 Klang Selangor.
Tel : 03-3290 2263
Fax : 03-3290 2016
Parent company: USA
Membership: Full
WHAT WE DO
Balchem Malaysia, formerly Stereo Sdn Bhd, is a key component of Balchem’s Performance Gases – Asia Pacific division. We specialize in the sales, distribution, and handling of specialized gases, most notably ethylene oxide for medical device sterilization
| Becton-Dickinson Sdn Bhd www.bd.com |
 |
ADDRESS
Lot 57C, Lorong Perusahaan 5,
Kulim Industrial Estate, 09000
Kulim, Kedah, Malaysia
Tel: 04 – 4801300
Fax: 04 – 4891737
Parent company: USA
Membership: Full
WHAT WE DO
Becton-Dickinson (BD) is a major global medical technology company, operating since 1987, focused on advancing health through manufacturing, research, and distribution of medical devices, instrument systems, and reagents. They specialize in patient/healthcare worker safety, diagnostics, and medication management with facilities in Kulim (manufacturing), Penang, and Kuala Lumpur (commercial/shared services).
Main products include hypodermic needles/syringes, intravenous (IV) catheters, automated medication management systems, pre-fillable drug delivery systems, diagnostic instruments, and flow cytometry tools.
| B.Braun Medical Industries Sdn Bhd www.bbraun.com.my |
 |
ADDRESS
Bayan Lepas Free Industrial Zone, P O Box 880,
10810 Penang, Malaysia
Tel: 04-632 3100
Fax: 04-643 3750
Parent company: Germany
Membership: Full
WHAT WE DO
B. Braun offers a comprehensive portfolio of medical devices, pharmaceutical solutions, and surgical instruments, with major manufacturing operations in Penang producing intravenous catheters for global markets. Key product areas include infusion therapy (pumps, sets), nutrition therapy, anesthesia, and surgical instruments/sutures.
| Boston Scientific Medical Device (Malaysia) Sdn Bhd www.bostonscientific.com |
 |
ADDRESS
PMT 741, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan 14100,
Bandar Cassia,Penang, Malaysia
Tel : + 604-5556688
Fax : +604-5556699
Parent company: USA
Membership: Full
PRODUCTS
Boston Scientific in Penang, Malaysia, operates a major manufacturing facility and a global distribution center in Batu Kawan, focusing on producing and distributing advanced medical devices for cardiology, endoscopy, and urology. It serves as a key hub for Asia-Pacific, manufacturing millions of devices like balloon catheters and laser fibers, while also managing regional supply chain, finance, and R&D activities.
| Alcon Johor (Ciba Vision Johor Sdn Bhd) www.alcon.com |
 |
ADDRESS
Ciba Vision Johor Sdn Bhd
No.1 Jalan DPB/5,
PelabuhanTanjung Pelepas
81560, Gelang Patah, Johor
Malaysia
Tel: (07) 504 3636
Fax: (07) 507 1759
Parent Company: Switzerland
Membership: Full
WHAT WE DO
CIBA Vision Johor Bahru (officially known as Alcon Johor Sdn. Bhd.) is a major manufacturing facility located in the Pelabuhan Tanjung Pelepas (PTP) Free Trade Zone in Johor, Malaysia.
Established in 2005, the plant is a critical, high-tech manufacturing hub for Alcon globally, specializing in the production of, and research into, high-quality, sterile, soft contact lenses. Contact Lens
| Cochlear Malaysia Sdn Bhd www.cochlear.com |
 |
COMPANY NAME & ADDRESS
Unit UG1, Upper Ground Floor, Vertical Podium,
Avenue 3, Bangsar South, No.8, Jalan Kerinchi,
59200, Kuala Lumpur, Malaysia.
Tel : +603 2282 3839
Fax : +603 2282 3839
Parent company: Australia
Membership: Full
WHAT WE DO
Cochlear Malaysia operates as a major global hub for Cochlear Limited, focusing on the manufacturing, repair, and distribution of implantable hearing devices, such as the Nucleus cochlear implant and Baha bone conduction implants.
Located in Kuala Lumpur, this facility supports the production of hearing implant sound processors for more than 180 countries, acting as a global center of excellence for repairs and manufacturing.
| Diptech Industries Sdn Bhd www.diptech.com.my |
 |
COMPANY NAME & ADDRESS
No.11 Jalan Angsana 1/3, Taman Perindustrian Angsana,
08000 Sungai Petani, Kedah
Tel : 604 422 3688
Fax : 604 424 0941
Parent company: Malaysia
Membership: Full
WHAT WE DO
Diptech Industries founded in 1998 and based in Malaysia, is an ISO-certified OEM manufacturer specializing in high-quality, latex and latex-free medical dipped rubber products. We produce airway devices, breathing bags, and test lungs for global clients, with expertise in custom, durable medical rubber goods.
Our products: Single Coated Medical Tapes, Double Coated Medical Tapes, Medical Woven & Non Woven Tapes, Release Liners Hydrocolloids. Leap Pads etc.
| DuPont Malaysia Sdn Bhd www.dupont.com |
 |
COMPANY NAME & ADDRESS
DuPont Malaysia Sdn Bhd
Level 7, Menara CIMB,
Jalan Stesen Sentral 2, Kuala Lumpur Sentral,
50470 Kuala Lumpur
Tel: 603-285 90700
Fax: 603-285 99079
Parent company: USA
Membership: Full
WHAT WE DO
DuPont plays a critical role in the Malaysian medical device industry, providing advanced, sterile, and sustainable packaging materials to support the country’s status as a major regional MedTech hub.
With a strong presence in Johor through its Spectrum™ Plastics Group, DuPont supplies high-performance materials like Tyvek® for sterile barrier systems and is actively involved in sustainable, high-volume manufacturing solutions in the region.
| Epsilon Medical Devices Sdn Bhd epsilon-group.com |
 |
PRODUCT
Medical Devices
COMPANY NAME & ADDRESS
Lot 5271, Jalan Perusahaan 3 Kamunting Industrial Area
34600 Kamunting, Perak
Tel : 05-8913158
Fax : 05-8911266
Parent company: Malaysia
Membership: Full
| Intersurgical Medical Sdn. Bhd (formerly known as Engineered Medical Systems Malaysia Sdn. Bhd) www.intersurgical.com.my. |
 |
COMPANY NAME & ADDRESS
993, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat,
Pulau Pinang.
Tel : +604 504 1252
Fax : +604 504 1253
Parent company: UK
Membership: Full
PRODUCT
Comprehensive range of medical devices for airway management, anesthesia, critical care, and oxygen & aerosol therapy. Product lineup includes i-gel supraglottic airways, breathing systems, filters, masks, and, in particular, Starmed CPAP/NIV helmets.
| Fresenius Medical Care Production Sdn Bhd www.freseniusmedicalcare.my |
 |
COMPANY NAME & ADDRESS
Lot 34618 PT29466, Bandar Enstek,
Mukim Labu, 71760 Bandar Enstek,
Negeri Sembilan.
Tel: 606-791 5334
Fax: 606-791 5336
Parent company: Germany
Membership: Full
PRODUCTS
We offer a full range of haemodialysis machines, peritoneal dialysis systems, water treatment systems, dialysis consumables, medical treatment chairs and other related products.
| Haemonetics Malaysia Sdn Bhd www.haemonetics.com |
 |
COMPANY NAME & ADDRESS
Plot 308, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan,
14100 Simpang Ampat,
Seberang Perai Selatan, Penang.
Tel: 604-643 3897
Parent company: USA
Membership: Full
PRODUCTS
Apheresis devices and related blood management products for the global market.
| Hospitech Manufacturing Services Sdn Bhd hospitech.my |
 |
COMPANY NAME & ADDRESS
Sub Lot, 1 Lot 6536, Batu 6 Jalan Bukit Kemuning,
40460 Shah Alam.
Tel: 03-5122 5199
Fax: 03-5122 5204
Parent company: Malaysia
Membership: Full
PRODUCT
Surgical tubing, suction catheters, disposable dressing kits/respirators, oxygen mask, nasal cannula, PVC catheters, bandages & gauze, burn sets, thoracic drainage system, mucous extractors, surgical connecting tubes, underwater chest drainage bottles
| Ideal Health Care Sdn Bhd www.idealcare.com.my |
 |
COMPANY NAME & ADDRESS
Ideal Health Care Sdn Bhd
Lot PT 60598
Kawasan Perindustrian LPK Fasa 1
08000 Sungai Petani Kedah
Tel: 04-444 6875
Fax: 04-444 5975
Membership: Full
PRODUCTS
Manufacturer and distributor of medical disposable and healthcare products, offering solutions in anesthesia, respiratory care, urology, and PPE.
Medical Disposable Products include:
– Foley catheters
– IV Catheters
– Endotracheal tubes
– Tracheotomy tubes
– IV Infusion Sets
– Blood Transfusion Sets
– Respiratory Care Products
– Surgical Face Masks
– Procedural Sets
| ITL Asia Pacific Sdn Bhd www.itl-limited.com |
 |
COMPANY NAME & ADDRESS
Plot 17B, Lorong Bemban 2, Bemban Industrial
Estate, 31000, Batu Gajah Perak
Tel: 05-3217 586
Fax: 05-3217 498
Parent company: Australia
Membership: Full
PRODUCTS
A comprehensive range of high-quality medical devices focused on blood sampling, collection, and transfer, as well as clinical procedure kits. Key products include the SampLok® blood sampling kits, DonorCare® needle guards, and various IV start kits, procedure packs, and sharps safety devices
| KLS Martin Malaysia Sdn Bhd www.klsmartin.com |
 |
COMPANY NAME & ADDRESS
No.1193, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat, Penang.
Tel : +604 506 2380
Fax : +604 506 2303
Parent company: Germany
Membership: Full
PRODUCT
We offer instruments, implants, HF units, surgical laser systems, OR lights, medical supply units, telemedicine, etc.
| INTEGER (Lake Region Medical Sdn Bhd) www.integer.net |
 |
COMPANY NAME & ADDRESS
No. 91-B, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Penang, Malaysia.
Tel: 04-810 1818
Fax: 04-643 1232
Parent company: USA
Membership: Full
WHAT WE DO
We specialize in the design and manufacturing of high-quality medical device components, particularly for cardiology, vascular, and neurovascular markets. Key products include precision catheters, guidewires, introducers, and, as part of the Integer portfolio, medical textiles and device component
| Cardinal Health (Mediquip Sdn Bhd) www.cardinalhealth.com |
 |
COMPANY NAME & ADDRESS
Padang Lati, Mukim Paya, Jalan Santan,
02450 Beseri, Perlis, Malaysia.
Tel: 04-938 1411
Fax: 04-938 2150
Parent company: USA
Membership: Full
PRODUCTS
Distributor and manufacturer of medical, surgical, and laboratory products, providing solutions for hospitals, labs, and home health. Our portfolio includes high-quality surgical gloves, infection control products (masks, apparel), wound care, fluid management, and lab consumables.
| Meditop Corporation (M) Sdn Bhd |  |
COMPANY NAME & ADDRESS
Lot 3, Persiaran Usahawan,Taman iks, Seksyen 9,
43650 Bandar Baru Bangi, Selangor.
Tel: 03-8924 0999
Fax: 03-8925 8660
Parent company: Japan
Membership: Full
PRODUCT
Infusion pumps, syringe pumps, catheters, and IV devices.
| Medical Innovation Ventures Sdn Bhd www.mediven.com.my |
 |
COMPANY NAME & ADDRESS
Medical Innnovation Ventures Sdn Bhd
Level 4, Biopharmaceutical Block,
IPHARM, NIBM, MOSTI, Block 5-A, Halaman Bukit Gambir
Gelugor, 11700 Penang
Malaysia
Tel: (+604) 6562824
Fax: (+604) 6562824
Website: www.mediven.com.my
Parent Company: Malaysia
Type of membership: Associate
WHAT WE DO
We are a molecular diagnostics company (founded in 2012) that researches, develops and manufactures advanced diagnostic kits for infectious diseases. We specialize in fast, affordable, and accurate point-of-care, molecular tests—such as GenoAmp™ and ProDetect™—for diseases like dengue, Zika, and COVID-19.
Molnlycke Health Care Sdn Bhd
PRODUCT
Surgical Gloves and Dental Gloves
COMPANY NAME & ADDRESS
Lot 12A, Jalan Hi-Tech 7, Industrial Zone Phase 2,
Kulim Hi-Tech Park,
09090 Kulim, Kedah
Tel : +604-402 6500
Parent company: Sweden
Membership: Full
Muzamal Industries Sdn Bhd
www.muzamal.com
PRODUCT
Disposable syringe with needle & without needle, specimen container & sutures
COMPANY NAME & ADDRESS
Muzamal Industries Sdn Bhd
Lot 21, Jalan 3A, Kawasan Perindustrian Cheras Jaya 43200
Cheras Selangor
Tel: 603 -90763080
Fax: 603- 90803098
Parent Company :Malaysia
Membership : Associate
Orthomedic Innovations Sdn Bhd
www.orthomedic.com.my
PRODUCT
Orthopaedic Instruments and Implants
COMPANY NAME & ADDRESS
188-D, Jalan Sultan Azlan Shah, Sungai Tiram,
11900 Bayan Lepas, Penang, Malaysia.
Tel: +604 644 5139
Fax: +604 644 9139
Parent company: Malaysia
Membership: Full
Owen Mumford Sdn Bhd
www.owenmumford.com
PRODUCT
1. Packing of Pen Needles
2. Packing of Vaginal Dilators
3. Manufacture of Single-use Sterile Safety Lancets
COMPANY NAME & ADDRESS
No. 21, Jalan Bioteknologi 3 Kawasan Perindustrian SiLC Nusajaya,
79200 Johor
Tel: +607 5539617
Fax: +607 5539617
Parent company: UK
Membership: Full
Tecan CDMO Solutions PN Sdn Bhd
www.paramit.com
PRODUCT
PCBA for genome sequencing machine
COMPANY NAME & ADDRESS
Tecan CDMO Solutions PN Sdn Bhd
Plot 372, Penang Science Park, Lorong Perindustrian Bukit Minyak 21, Taman Perindustrian Bukit Minyak, 14100 Simpang Ampat
Seberang Perai Tengah, Penang, Malaysia
Tel : 604-540 7155
Fax : 604-540 7111
Parent company: Switzerland
Membership: Full
PENTAX Medical (Penang) Sdn Bhd
https://www.pentaxmedical.com/
PRODUCT
OEM Manufacturing- Endoscopic system
SERVICES
Repair of the endoscopy (service for own brand only)
COMPANY NAME & ADDRESS
PENTAX Medical (Penang) Sdn. Bhd.
Plot 12 & 13, Fasa 4
Hilir Sungai Keluang 3
Bayan Lepas, 11900 Penang, Malaysia
Tel: 604 6379800
Parent Company: Japan
Membership: Full
Prent Malaysia Sdn Bhd
prent.com.my
PRODUCT
Custom supplier of precision plastic thermoforming
COMPANY NAME & ADDRESS
PTD102587, Jalan Cyber 14, Senai Ind Park IV,
81400 Senai, Johor, Malaysia.
Tel: 07- 599 7661
Fax: 07-599 7660
Parent company: USA
Membership: Full
Sanmina-SCI Systems (Malaysia) Sdn Bhd
www.sanmina.com
PRODUCT
Electronic manufacturing services of finished medical devices and printed circuit board assemblies.
COMPANY NAME & ADDRESS
Plot 202, Lorong Perusahaan Maju 9 Bukit Tengah Industrial Estate
13600 Perai, Penang.
Tel : +604 508 1228
Fax : +604 508 1233
Parent company: USA
Membership: Full
Sina-Sterilgamma Sdn Bhd
www.sinasterilgamma.com
PRODUCT
Services in Sterilisation Technology
COMPANY NAME & ADDRESS
Sina-Sterilgamma Sdn Bhd
1-1 Jalan Bandar Rawang 11
Pusat Bandar Rawang
48000 Province: Selangor
Malaysia
Tel: (603) 60912055
Fax: (603) 60936872
Parent Company: Malaysia
Membership: Associate
Sin Yong Guan Industries Sdn. Bhd.
www.syg53.com
PRODUCT
Medical PVC Compound and Plastic Tubing for Medical
COMPANY NAME & ADDRESS
8 Solok Rishah 2, Kwsn Perindustrian Silibin 30100 Ipoh, Perak, Malaysia.
Tel: 05-526 7231
Fax: 05-526 8491
Parent company: Malaysia
Membership: Full
Ensera (formerly SteriPack)
www.ensera.com
PRODUCT
Contract manufacturing of medical devices and pharmaceutical products
COMPANY NAME & ADDRESS
PT119992, Jalan Canang Emas 8 Telok Gong,
42000 Klang Selangor, Malaysia
Tel : 03-3167 3596
Fax: 03-3167 3597
Parent company: Ireland
Membership: Full
Straits Orthopaedic Sdn Bhd
www.straitsortho.com.my
PRODUCT
Orthopaedic Devices
COMPANY NAME & ADDRESS
Straits Orthopaedics (Mfg) Sdn Bhd
483, Tingkat Perusahaan 4A
Prai Free Industrial Zone
13600 Prai, Penang
Malaysia
Tel: 604-3831885
Fax: 604-3838178
Parent Company: Malaysia
Membership: Associate
Symmetry Medical Malaysia Sdn Bhd
www.tecomet.com
PRODUCT
Medical sterilizing cases, medical instruments and orthopaedic implants.
COMPANY NAME & ADDRESS
Plot 80C, Kawasan Perusahaan Bayan Lepas,
11900 Bayan Lepas, Penang, Malaysia.
Tel : 04-645 6802
Fax : 04-6445805
Parent company: USA
Membership: Full
Synergy Sterilisation (M) Sdn Bhd
www.steris-ast.com
PRODUCT
Sterilization –Gamma, sterilization –ETO lab service, post process inspections logistics, provision of sterilisation process of medical products.
COMPANY NAME & ADDRESS
Plot 203 Kuala Ketil Industrial Estate,
09300 Kuala Ketil, Kedah, Malaysia.
Tel: 04-415 2111
Fax: 04-415 2121
Parent company: USA
Membership: Full
Teleflex Medical Sdn. Bhd.
www.teleflexmedical.com
PRODUCT
Anaesthesiology, respiratory, urology and home care medical devices.
COMPANY NAME & ADDRESS
Lot No PT2577, Jalan Perusahaan 4 Kamunting,
34600 Kamunting Perak.
Tel : 05-891 5111
Fax : 05-891 2699
Parent company: USA
Membership: Full
Texchem Life Sciences Sdn Bhd
www.texchem-pack.com
PRODUCT
Disposable medical device and key components contract manufacturing.
SERVICES
Contract Manufacturinng and Polymer engineering solution
COMPANY NAME & ADDRESS
Lot 3, Jalan P/6 Kawasan Perindustrian Bangi,
Line 2, Bandar Baru Bangi 43650, Selangor.
Tel: +603-8925 0370
Fax: +603-8925 0317
Parent company: Japan
Membership: Full
Tomoe Malaysia Sdn Bhd
www.tomoeshokai.co.jp
PRODUCT
EO Sterilization Gas for Medical Devices
COMPANY NAME & ADDRESS
Lot 13, Jalan Kulim Hi-Tech 13,
Kulim Hi Tech Park Phase 3,
Kulim, Kedah 09000 Malaysia.
Tel : +604-492 4101
Fax : +604-492 4202
Parent company: Japan
Membership: Associate
Top Glove Sdn Bhd
www.topglove.com
PRODUCT
Latex powdered/ powder-free examination/sterile surgical gloves, nitrile powdered/ powder-free examination gloves, vinyl opowdered/ P-F examination gloves, household flocklined/Unlined gloves, coloured latex P-gloves(blue/green), green mint latex p-gloves, cleanroom gloves
COMPANY NAME & ADDRESS
Lot 4968, Bt 6 Jalan Teratai, Off Jalan Meru 41050 Klang
Tel: 03-3392 1992/1905
Fax: 03-3392 1291/8410
Parent company: Malaysia
Membership: Full
UWHM Sdn Bhd
www.uw-healthcare.com
PRODUCT
Disposable Oxygen Prefilled Humidifier, Disposable Oxygen Prefilled Nebulizer, Digital Oxygen Flow Meter, Digital Oxygen Humidifier Water Level & Humidity Sensor
COMPANY NAME & ADDRESS
UWHM Sdn Bhd
PMT 790, Jalan Cassia Selatan 5/2,
Taman Perindustrian Batu Kawan,
Bandar Cassia, Pulau Pinang,
14110, Malaysia.
Tel: 604-5855229
Fax: 604 – 5899677
Parent company: Malaysia
Membership: Full
BACTIGUARD (South East Asia) Sdn. Bhd
www.bactiguard.com
ADDRESS
No. 308, Jalan Perindustrian Bukit Minyak 18,
Penang Science Park, 14100 Penang, Malaysia.
Tel: 604-505 4241 / 505 9841
Fax: 604- 505 9367
Parent company: Malaysia
Membership: Full
PRODUCT
Surgical sutures, hernia meshes, wound management products, surgical implants and other surgical disposables.
Worldwide Medivest Sdn Bhd
www.wmsb.com.my
PRODUCT
Wound closure and surgical sutures
COMPANY NAME & ADDRESS
No. 2, Jalan Karyawan 4/KU7, Lorong Sg Puloh,
Taman Kapar Bestari, Kapar 42200, Selangor.
Tel: 603-3291 2625
Fax: 603-3291 2725
Parent company: Malaysia
Membership: Full
Zeito Plastic Components Sdn Bhd
www.zeito.com.my
PRODUCT
Manufacturing for Injection Molding Plastic Components & Assembly for Medical Devices.
COMPANY NAME & ADDRESS
Lot 9, Jalan CJ 1/7, Kawasan Perusahaan Cheras Jaya, Jalan Balakong, 43200 Cheras , Selangor Darul Ehsan.
Tel : 03-9074 9177
Fax : 03-9074 9096
Parent company: Malaysia
Membership: Full
Solventum Malaysia Sdn Bhd
www.solventum.com
PRODUCT
Dental Devices, Laboratory Equipment
COMPANY NAME & ADDRESS
Level 8, Block F, Oasis Square No.2, Jalan PJU1A/7A,
Ara Damansara, 47301 Petaling Jaya, Selangor.
Tel : 603-7884 2888
Fax : 603-7884 2902
Parent company: USA
Membership: Associate
Alliance Contract Manufacturing Sdn Bhd
www.acm-holdings.com
PRODUCT
Manufacture of medical devices and equipment
COMPANY NAME & ADDRESS
2006, Jln Jelawat
Seberang Jaya Industry Estate
Prai, 13700 Penang
Telephone : (604) 2912888
Fax : (604) 2912999
Country of Origin: Malaysia
Membership: Associate
Alcon Laboratories (Malaysia) Sdn Bhd
www.alcon.com
PRODUCT
Authorized Representative
Surgical equipment and contact lense care products
COMPANY NAME & ADDRESS
Alcon Laboratories (M) Sdn Bhd
Level 20-1, Tower B, Plaza 33
No.1, Jalan Kemajuan, Seksyen 13
Petaling Jaya
Selangor
46200 Malaysia
Tel : (603) 79481888
Fax (603) 79481888
Parent Company: Switzerland
Membership : Associate
Baxter Healthcare Sdn Bhd
www.baxter.com.my
COMPANY NAME & ADDRESS
B-21-3A, Level 21, The Ascent, Paradigm, No.1,
Jalan SS7/26A, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia.
Tel : 603-7611 6899
Fax : 603-7611 6800
Parent company: USA
Membership: Associate
Becton Dickinson Sdn Bhd
www.bd.com.my
PRODUCT
Diagnosis Instrument for Influenza A & B
COMPANY NAME & ADDRESS
Unit 24, LG 5 (Executive Wing), Hotel Equatorial,
1 Jalan Bukit Jambul, 11900 Bayan Lepas,Penang.
Tel : +604 640 5688
Fax : +604 640 5686
Parent company: USA
Membership: Associate
Biocon Sdn Bhd
www.biocon.com
PRODUCT
Biopharmaceutical manufacturing
COMPANY NAME & ADDRESS
No.1 Jalan Bioteknologi 1, Kawasan Perindustrian SILC,
15 Bandar Puteri, Johor, 79200, Malaysia.
Tel: 607-560 0000
Fax: 607-560 0098
Parent company: India
Membership: Associate
CCB Medical Devices Sdn Bhd
www.ccb-medical.com
PRODUCT
Injection and blow moulded parts made from various polymer, silicon and rubber. Medical tube extrusion, Assembly services.
SERVICES
Contract manufacturing services from R&D, molding
and assembly.
COMPANY NAME & ADDRESS
CCB Medical Devices Sdn Bhd
PMT 1124, Jalan Perindustrian
Bukit Minyak 8
Taman Perindustrian Bukit Minyak
Simpang Ampat, Penang
14100 Malaysia
Tel : 604 5040198
Fax 604 5040908
Parent Company: Germany
Membership : Full
Gem Impression Sdn Bhd
www.gem-i.net
PRODUCT
COMPANY NAME & ADDRESS
Gem Impression Sdn Bhd
9&11 Lorong Serunai 2
Sungai Bakap
14200 Penang, Malaysia
Parent Company: Malaysia
Membership: Associate
Integrated Plastic Kogyo (M) Sdn Bhd
http://www.ipk.com.my
PRODUCT
Single Use Safety Blood Lancet
COMPANY NAME & ADDRESS
Integrated Plastic Kogyo (M) Sdn Bhd
12, Jalan Teras 1,
Taman Industri Teras
Balakong
43300 Selangor, Malaysia
Tel: (03) 8961 6880
Fax : (03) 8961 9880
Website: www.ipk.com.my
Parent Company: Malaysia
Membership: Associate
Isofield Sdn Bhd
www.isofield.com
PRODUCT
Clean and sterile PPE
COMPANY NAME & ADDRESS
Isolfield Sdn Bhd
No. 6 Jalan Gudang 16/9, Seksyen 16
Shah Alam, Selangor, 40200
Malaysia
Telephone (012) 305-6895
Country of Origin: Ireland
Membership: Associate
Website www.isofield.com
Jabil Circuit Sdn Bhd
www.jabil.com
PRODUCT
Finished devices : Flu detector, Patient Bedside Monitor, Endoscope Reprocessor.
High Level Assembly : Thermal Cyclers (PCR), Sterilization.
PCBA : MRI, Ultrasound, Blood Analyzers, Oxygen Monitor, Cytometry and Hematology
COMPANY NAME & ADDRESS
Jabil Circuit Sdn. Bhd.
56 Hilir Sungai Keluang 1
Bayan Lepas Free Trade
Industrial Zone Phase 4
11900 Penang, Malaysia
Tel: (04) 6427975
Fax : (04) 6428001
Website www.jabil.com
Parent Company: United States
Type of membership: Full
Kobayashi Healthcare (Malaysia) Sdn Bhd
info-my@kobyashi.com
PRODUCT
Importer and Authorized Representatives – cooling gel sheets and heat patch
COMPANY NAME & ADDRESS
Kobayashi Healthcare (Malaysia) Sdn Bhd
50-2-2A, Level 2, Wisma UOA Damansara,
50, Jalan Dungun,
Damansara Heights
50490 Kuala Lumpur
Parent Company: Japan
Membership: Associate
Medtronic Malaysia Sdn Bhd
www.medtronic.com
PRODUCT
Medical Electronics Technology
COMPANY NAME & ADDRESS
B-23-1, The Ascent, Paradigm, No 1 Jalan SS7/26A, Kelana Jaya,
Petaling Jaya, Selangor, 47301, Malaysia
Tel : 603 -78838000
Fax : 603 – 78860474/4702
Parent company: USA
Membership: Associate
Nagoya Plastic Industry Sdn Bhd
http://www.nagoyaplastic.com
PRODUCT
Products: HME, Disposable Bronchoscopy etc.
Services Plastic Injection Moulding with Secondary Process
such as spray painting, printing and sub-assembly
COMPANY NAME & ADDRESS
Nagoya Plastic Industry Sdn. Bhd.
Lot 89, 90, 91, 1249, Jalan Aman 2,
Kawasan Perusahaan
Taman Makmur, Sungai Seluang
Lunas
Kedah, 09600 Malaysia
Tel: (+604) 4848434
Fax: (+604) 484461725
Website: www.nagoyaplastic.com
Parent Company: Malaysia
Type of membership: Associate
MIRA Medsource (Malaysia) Sdn Bhd
www.miramedsource.com
PRODUCT
Medical Device Sourcing for export to USA
COMPANY NAME & ADDRESS
35, 1st Floor, Jalan Todak 6,
Pusat Bandar Sunway Perdana,
13700 Seberang Jaya, Penang.
Tel: 604 383 8025
Hp: 6012 428 2311
Fax: 604 383 1845
Parent company: China
Membership: Associate
Parent Company: Malaysia
Type of membership: Associate
Multivac Sdn Bhd
www.multivac.com
PRODUCT
Packaging Machine
COMPANY NAME & ADDRESS
Lot 10-E, Pusat Teknologi Sunsuria, Jalan Teknologi,
Taman Sains Selangor, Kota Damansara,
47810 Petaling Jaya, Selangor Malaysia.
Tel : +603 61519885 / +603 61511885
Fax : +603 6143 6885
Parent company: Germany
Membership: Associate
Nihon Kohden Malaysia Sdn Bhd
nihonkohden.com.my
PRODUCT
Patient bedside monitors
COMPANY NAME & ADDRESS
Nihon Kohden Malaysia Sdn.Bhd.
Suite 15-13,Level 15, G Tower,
199 Jalan Tun Razak
Kuala Lumpur
50400, Malaysia
Tel: (603) 21610100
Fax: (603) 21612520
Parent Company: Japan
Membership: Associate
Polyplas Sdn Bhd
http://www.polyplassb.com/
PRODUCT
Manufacturing of plastic injection molding components
COMPANY NAME & ADDRESS
Polyplas Sdn Bhd
No 2056, Mukim 14,
Lorong IKS Bukit Minyak 5,
Taman IKS Bukit Minyak,
14000 Bukit Mertajam Penang
Tel: (04) 5070188
Fax: (04) 5078188
Parent Company: Malaysia
Membership: Associate
Prodelcon Sdn Bhd
http://www.psb.com.my
PRODUCT
Manufactured: Surgical instruments, Class 3 implantable parts, Precision molds and die sets, integrated automation solutions, High precision RF Microwave parts and assembly services.
COMPANY NAME & ADDRESS
Prodelcon Sdn Bhd
78 Lintang Bayan Lepas 7,
Phase IV
Bayan Lepas
11900 Penang, Malaysia
Tel: 604-6438913
Fax: 604- 6438914
Parent Company: Malaysia
Membership: Associate
Professional Tools & Dies Sdn Bhd
www.professional-tools.com
PRODUCT
1. Contract Manufacturing – Assembling of Semi-Finished and Finished Products / Modules.
2. Precision Plastic Injection Molding and Plastic Injection Mold Making (In-House).
3. Precision Sheet Metal Stamping and Sheet Metal Stamping Die-Making (In-House).
COMPANY NAME & ADDRESS
7118,Jalan Mak Mandin, Kawasan Perindusrian Mak Mandin,
13400 Butterworth, Penang, Malaysia.
Tel: 04-332 2335
Fax: 04-331 2337
Parent company: Malaysia
Membership: Associate
PMA Manufacturing Sdn Bhd
PRODUCT
Cleanroom and Non-Cleanroom Labels, Thermal Transfer Ribbons, Tapes, Medical Pre-Saturated Wipes and Disinfectant Sprays.
COMPANY NAME & ADDRESS
No. 11, Lintang Beringin 2, Diamond Valley,
Georgetown Penang 11960 Malaysia.
Tel: 04-626 1518
Fax: 04-626 5253
Parent company: Malaysia
Membership: Associate
Plastik STC Sdn Bhd
www.hlhightech.com
PRODUCT
Plastic injection moulding services.
Plastic injection mould fabrication.
Precision engineering machining parts.
Clean room class 8 plastic moulding.
COMPANY NAME & ADDRESS
No 7 Jalan TSB 9, Taman Industri Sg Buloh,
Sungai Buloh, 47000 Selangor, Malaysia.
Tel: 03-6157 5313
Fax: 03-6157 5318
Parent company: Malaysia
Membership: Associate
Silcotech Industry Sdn Bhd
www.silcotechindustry.com
PRODUCT
Silicone Injection Process
COMPANY NAME & ADDRESS
Silcotech Industry Sdn Bhd
No. A 153, Jalan 3,
Kawasan Perusahaan MIEL, Sungai Lalang Phase V
Sungai Petani
08000 Kedah
Malaysia
Telephone (604) 4419928
Fax (604) 4429928
Country of Origin: Malaysia
Membership: Associate
Website www.silcotechindustry.com
Smith & Nephew Operations Sdn Bhd
www.smith-nephew.com
COMPANY NAME & ADDRESS
Smith & Nephew Operations Sdn Bhd
Plot P332, Persiaran Cassia Selatan 8
Taman Perindustrian Batu Kawan,
Mukim 13
14100 Penang, Malaysia
Tel: (04) 2023111
Fax (04) 2023111
Website www.smith-nephew.com
Parent Company: United Kingdom
Membership: Associate
Sontara South Asia Sdn Bhd
www.sontara.com
PRODUCT
Nonwoven products for medical use
COMPANY NAME & ADDRESS
Level 15-1, 1 First Avenue 2A, Dataran Bandar Utama Damansara,
47800 Petaling Jaya, Selangor.
Tel: +603 7651 7396
Fax: +603 7651 7701
Parent company: USA
Membership: Associate
Tako Astatic Technology Sdn Bhd
www.takohealthcare.com.my
Range : Roll stocks / Pouches / Lids / Bags (Plain & Printed)
Material: Tyvek® (Uncoated & Coated), Medical Paper (Uncoated & Coated), Cleanroom Linear Tear Bags, Performance films (Peelable film, thermoforming film), Sterilization Indicator Printing, MG Paper, ESD Packaging
COMPANY NAME & ADDRESS
Tako Astatic Technology Sdn Bhd
Plant 1: No. 15 Jalan Kesuma 2/2, Bandar Tasik Kesuma, 43700 Beranang, Selangor, Malaysia.
Plant 2: No. 11 Jalan Kesuma 2/2, Bandar Tasik Kesuma, 43700 Beranang, Selangor, Malaysia.
Tel: (603) 87238843
Fax: (603) 87238844
Parent company: Malaysia
Membership: Associate
Tip Corporation Sdn Bhd
www.tipcorp.com
PRODUCT
Types of Products Manufactured: Cleanroom Bags, Medical Pouches, Sterilization Pouches, Easypeel Pouches, EasyTear Pouches, Tyvek
Pouches
COMPANY NAME & ADDRESS
Lot 2288, Jalan P4/8, Bandar Teknologi Kajang
Semenyih, Selangor, 43500
Malaysia
Telephone : ( 603) 872-37889
Fax : (603) 872-71889
Country of Origin: Malaysia
Membership: Associate
V3 Bio Sdn Bhd
www.v3bio.com
PRODUCT
Wound care and infection control medical devices
COMPANY NAME & ADDRESS
V3 Bio Sdn Bhd
No 18, Jalan Cassia Selatan 3/1,
Taman Perindustrian Batu Kawan
Bandar Cassia
14100 Pulau Pinang
Malaysia
Telephone: (604) 5886993
Fax: (604) 5886993
Country of Origin: Malaysia
Membership: Associate
Website www.v3bio.com
Varian Medical Systems Malaysia Sdn Bhd
www.varian.com
PRODUCT
Manufacturer of medical devices and software for treating cancer and other medical conditions with radiotherapy, radiosurgery, proton therapy, and brachytherapy
COMPANY NAME & ADDRESS
Suite B-15-5, Wisma Pantai, Plaza Pantai No. 5,
Jalan 4/83A, Off Jalan Pantai Baru,
59200 Kuala Lumpur Malaysia.
Tel: +603-2296 7600
Fax: +603-2296 7601
Parent company: USA
Membership: Associate
Johnson & Johnson Sdn Bhd
(Medical Division)
www.jnj.com
PRODUCT
J&J’s MedTech manufactures a broad range of products used in the orthopedics, surgical care, specialty surgery and cardiovascular care from its manufacturing plants globally.
Ethicon, a leader in advance medical devices division of Johnson & Johnson, is the clear leader within the Advanced Surgical Device segment in Malaysia.
Ethicon leads in surgical devices sub-segments for Sutures, Energy, Staplers and Hemostat.
DePuy Synthes is the market leader in Orthopedics in Malaysia, leads in trauma, joint reconstruction, spine care solution and neurological solutions.
COMPANY NAME & ADDRESS
Level 8, The Pinnacle, Persiaran Lagoon,
Bandar Sunway, 46150, Petaling Jaya,
Selangor, Malaysia.
Tel: 03-7661 4615
Fax: 03-7610 0519
Parent company: USA
Membership: Full
Sanichem Resources Sdn Bhd
www.sanichem.my
PRODUCT
(1) Analytical testing (ETO RESIDUAL) on medical devices,
(2) Microbiology testing (sterility, bioburden, BnFetc) on medical devices
(3) Water quality testing.
COMPANY NAME & ADDRESS
Sanichem Resources Sdn Bhd
N0 7 & 7A, Jalan Timur 6/1A,
Mercato @ Enstek
Bandar Baru Enstek, Negeri Sembilan
71760 Malaysia
Tel: 606- 7947606
Fax: 606-7947607
Country of Origin: Malaysia
Membership: Associate
Dexcom (Malaysia) Sdn Bhd
www.dexcom.com
PRODUCTS
Manufactures, produces and distributes continuous glucose monitoring systems for diabetes management
COMPANY NAME & ADDRESS
Dexcom Malaysia Sdn Bhd
PMT775, Persiaran Cassia Selatan 4,
Simpang Ampat
14100 Penang
Tel: (604) 5631700
Country of Origin: USA
Membership: Associate
PRODUCT
Medical device for test and treatment of arrhythmia
COMPANY NAME & ADDRESS
JLL Malaysia Sdn Bhd
PMT 1224 Jaln PSPN 3, Penang Science Park North,
Simpang Ampat, 14100 Penang
Tel: (+604) 518 7777
Country of Origin: Japan
Membership: Full
AMMI Chairman / Director Government Affairs & Board of J&J Msia
Andy joined Johnson & Johnson in 2015 and leads the Government Affairs & Policy function for J&J’s total enterprise in Malaysia & Singapore.
Andy is a member of the J&J Malaysia’s Country Management Board and actively represent J&J, in lead positions, in various trade associations including in Association of Malaysian Medical Industries; Pharmaceutical Association of Malaysia and American Malaysian Chamber of Commerce.
He has over 19 years of Government & Public Affairs experience in various industry including Medical Device, Pharmaceutical and FMCG businesses, particularly, in the field of industry policy issues management and advocacy strategies in shaping the operating environment. Prior to joining J&J, Andy held various Government & Corporate Affairs positions in numerous multi-national corporations including Sanofi and Merck Sharp & Dohme.
Chief Executive Officer of InvestPenang
Dato’ Loo Lee Lian is the Chief Executive Officer of InvestPenang, the principal investment promotion agency and wholly owned company of the state of Penang. It is the leading point of contact for investment attraction, facilitation and support for foreign and local businesses.
She came into her position in 2010 backed by 25 years of industry background in the various sectors of the manufacturing industry. She is responsible for identifying new areas of growth and strategizing the state’s investment and industrial policies. Underpinned by the state and InvestPenang’s achievements, the sustained performances of the manufacturing and services sectors have elevated Penang’s per capita income and maintained the state’s status as an economic powerhouse of Malaysia.
Dato Loo has led companies in strategic planning, project management, operations, business development, supply chain management, customer strategies, and international business migration. Her invaluable experience has made her a highly sought-after guest speaker at multiple corporate conferences and also community seminars focusing on job diversity, women empowerment and youth education programs.
Dato Loo holds concurrent appointments as a Director in Penang STEM, member of the Selection Committee of the Penang Future Foundation, Penang State Government’s scholarship program for university undergraduate studies, and is the Chairperson of the Penang i4.0 Seed Fund Evaluation Committee.
Born and bred in Penang, Dato Loo graduated with Bachelor of Economics from the University of Adelaide, South Australia, and received her MBA from the University of South Australia.
YAB Tuan Chow Kon Yeow
Chief Minister of Penang
YAB Tuan Chow Kon Yeow is Penang’s fifth Chief Minister. He assumed the State’s top leadership role after Pakatan Harapan’s thumping victory in Malaysia’s 14th General Elections in May 2018. He has also been a Penang State Executive Councilor since 2008.
He has been the DAP Penang State Chairman since 2000 and DAP National Vice-Chairman since 2004.
In a recent interview after his swearing-in, the fifth Chief Minister of Penang reiterated his administration’s commitment to ensure delivery of three mega projects, namely the Penang Transport Master Plan, flood mitigation and affordable housing. Undaunted by the higher expectations, he takes this as a challenge to serve Penangites and find ways to make this state, a better home for all.
Besides that, YAB Tuan Chow also aims to transform Penang into ‘A Family-Focused Green and Smart State that Inspires the Nation’ with the Penang2030 Vision and this is the current focus of the State Government.
Vice-President – Manufacturing, Malaysia
Samuel has over 25 years of experience in consumer electronic, implantable medical device manufacturing & logistics operations. Graduating from RMIT University, Australia, Samuel joined Seagate Singapore in 1994 and took up various roles across South East Asia.
In 2007, Samuel moved to Sydney and joined Cochlear. Here, he continued embracing opportunities and new challenges culminating in his final Sydney-based role as the Head of Manufacturing Engineering.
Subsequently, in 2016 Samuel moved to Malaysia to build the manufacturing & global logistics facility from scratch to support Cochlear’s growing global demand. Currently, he is responsible for manufacturing & logistics operations as a Vice President of Malaysian operations.
Product Marketing Manager, Asia-Pacific
Oliver Healthcare Packaging
Amirul leads the product commercialization across the Asia-Pacific region at Oliver Healthcare Packaging. Into his sixth year with Oliver, Amirul brings a strong foundation in medical packaging, having started in technical services and played a key role in establishing Oliver’s R&D Technical Center in Singapore.
His experience includes medical packaging design and conceptualization, R&D, material testing, and troubleshooting. In his current role, Amirul manages the regional product portfolio, aligning global offerings with Asia-Pacific market needs. He works cross-functionally to drive product education, strategic planning, and sustainability initiatives, guided by market insights and competitive analysis.
He holds a BSc (Hons) in Biomedical Engineering from the Singapore University of Social Sciences
Managing Director, Abbott Penang
Mr HT Eow has been the Managing Director for Abbott Penang (St Jude Medical Operations Sdn Bhd) since July 2015. Prior to that, he spent 6 years with B.Braun Medical Industries Sdn Bhd as Vice-President (2012–2015) and General Manager (2009 -2012) for Medical Plant. Mr Eow was also attached to Intel Tech Sdn Bhd for 16 years before moving to the medical device industry.
Mr Eow holds a Bachelor of Science in Industrial Engineering from Universiti Teknologi Malaysia.
ADT Biotech Sdn Bhd
https://adt-biotech.com/
PRODUCTS
In Vitro Diagnostic Devices
COMPANY NAME & ADDRESS
ADT Biotech Sdn Bhd
307, Block B, Phileo Damansara 1, , 9 Jalan 16/11,
Petaling Jaya, Selangor, Malaysia., 46350
Tel: (03) 793-16760
Country of Origin: Malaysia
Membership: Associate
Opulent Solutions Sdn Bhd
www.opulent-group.com
PRODUCTS
1) Printed circuit board assembly (PCBA) for Endoscopy
2) Printed circuit board assembly (PCBA) of Blue Light Therapy for Psoriasis
3) Printed circuit board assembly (PCBA) of medical devices for the treatment of sleep apnea and other
respiratory conditions
4) Full box build integration assembly for hair growth product
SERVICES
EMS services provider. Provide vertical integration services from PCB to PCBA and till full box build integration assembly
COMPANY NAME & ADDRESS
Opulent Solutions Sdn Bhd
Plot III Bayan Lepas Industrial Park,
Lebuh Raya Kampung Jawa
Bayan Lepas, Pulau Pinang, 11900
Tel: (604) 640-8698
Country of Origin: Singapore
Membership: Full
Puncak Bumi Utama Sdn Bhd
www.pbumed.com
PRODUCTS
Patient isolation transporter, medical healthcare beds, medical peripheral and accessories
COMPANY NAME & ADDRESS
Puncak Bumi Utama Sdn Bhd
S-3, S-4, S-10 & KIM 2 Lorong Kendi 1,
Jalan Kendi, Kawasan Industri MARA,
14100 Simpang Ampat,
Seberang Perai Selatan, Pulau Pinang, Malaysia.
Tel: (604) 640-8698
Country of Origin: Malaysia
Membership: Associate
Oliver™ Healthcare Packaging Malaysia Sdn. Bhd.
www.oliverhcp.com
PRODUCTS
Sterile-grade die-cut lid, roll stock, HDPE card, and pouch products for the medical device and pharmaceutical markets.
COMPANY NAME & ADDRESS
Oliver™ Healthcare Packaging Malaysia Sdn. Bhd.
No. 15, Jalan Persiaran Bioteknologi,
Kawasan Perindustrian SILC,
79200 Iskandar Puteri, Johor,
Malaysia
Tel: +65 6232 4001
Country of Origin: USA
Membership: Associate
Menicon Malaysia Sdn Bhd
www.menicon.my
PRODUCTS
Contact Lens
COMPANY NAME & ADDRESS
Menicon Malaysia Sdn Bhd
No.2, Jalan Hi-Tech 16, Zon Industri Fasa 4,
Kulim Hi-Tech Park,
Kulim, 09090 Kedah
Tel: (04) 4089545
Country of Origin: Japan
Membership: Full
KHTP Sterilisation Services Sdn Bhd
www.khtp.com.my
SERVICES
Provision of ethylene oxide sterilization services involving the process of sterilization of medical device
COMPANY NAME & ADDRESS
KHTP Sterilisation Services Sdn Bhd
Lot 33, Jalan Hi-tech 4,
Kulim Hi-Tech Park,
Kulim, 09090 Kedah
Tel: 04-403 2131
Country of Origin: Malaysia
Membership: Associate
AFA Pac Sdn Bhd
www.afa-tech.com
PRODUCTS
1. Customized End of Line Packaging Automation
2. Assembly Machine for Medical Devices
3. Thermoform Packing Machine
COMPANY NAME & ADDRESS
AFA Pac Sdn Bhd
No. 3, Jalan TTC 7,
Taman Teknologi Cheng,
Kawasan Perindustrian Cheng,
75250 Melaka,
Malaysia.
Tel: (06) 3363518
Country of Origin: Malaysia
Membership: Associate
Knowles Electronics (M) Sdn Bhd
www.knowles.com
PRODUCTS
Types of Products Manufactured
COMPANY NAME & ADDRESS
Knowles Electronics (M) Sdn Bhd
Plot 104, Lebuhraya Kampung Jawa
Bayan Lepas Industrial Estate
Bayan Lepas
11900 Penang
Tel: 604-6147466
Country of Origin: Malaysia
Membership: Associate
Communications Specialist | ESG Pillar Lead, Boston Scientific Penang
Yee Ting is a seasoned communications specialist with over a decade of experience in corporate communications. Known for her passion in CSR, she now leads the ESG pillar at Boston Scientific in Penang, where she plays a key role in coordinating cross-functional efforts to drive ESG initiatives. Her work focuses on using ESG as an engagement platform to bring teams together and create meaningful impact through sustainability initiatives.
.
Global Director Regulatory & Standards, DuPont Tyvek Healthcare Packaging
DuPont Water & Protection
Thierry Wagner has spent over 37 years working for DuPont and currently as Global Director, Regulatory & Standards – DuPont Healthcare Packaging located in Luxembourg. He is convenor of ISO/TC 198/WG7 “Sterilization of Health Care Products—Packaging” and of CEN/ TC 102/WG4 “Sterilizers and associated equipment for processing of medical devices – Packaging”, past chairman of the Sterile Barrier Association (SBA), currently SBA director and regulatory committee chair.
Thierry is also a member of the CEN-CENELEC Healthcare Sector Forum and actively engaged in the IHI ENKORE Eco Healthcare Project with the objective to drive the future of sustainability in healthcare.
Thierry published 2 book chapters on healthcare packaging and is a regular speaker at evenst and conferences on medical and pharmaceutical packaging.
VP Global Regulatory Affairs & Quality Assurance
With a passion for developing solutions-focussed teams, Marinela is responsible for leading quality and regulatory excellence for SteriPack and advancing our corresponding compliance strategies. She’s also the chair of our Environmental and Social Governance steering committee.
Marinela has 2 Master’s Degrees – one in Law, and another in Healthcare Administration. She has previously held director positions at Synergy Health and Steris.
Chief Technology Officer
STERIS Applied Sterilization Technologies
Dr. Brian McEvoy is Chief Technology Officer at STERIS AST with responsibilities for technology leadership, strategy development & deployment, across sterilization technology platforms, both gaseous (Ethylene Oxide and Vaporized Hydrogen Peroxide) and radiation (Electron Beam, Gamma and Xray radiation). With over twenty years in the healthcare sterilization industry, and core competences in sterilization technology and sterility assurance, Brian’s current technical role involves supporting STERIS AST and its Customers with the supply of sterile medical devices to critical healthcare applications.
Brian has a passion for educational and personal development with a PhD in Microbiology and an MBA and numerous publications in the field of sterilization. A recognized industry expert and a national expert on CEN and ISO standards committees and is the inaugural recipient of the AAMI 2024 Sterilization Science Award. Co-chair of
Kilmer Modalities Collaboration group. Program Committee Member of Kilmer* Conference 2016, 2019, 2022 and 2025 and Program Chair for the International Meeting on Radiation Processing 2024.
Siliconpro Lab Sdn Bhd
www.siliconprolab.com
PRODUCTS
Manufacturer of silicone and plastic products
Services
COMPANY NAME & ADDRESS
Lot. 1910, Jalan Kawasan Perindustrian Balakong 7
Kawasan Perindustrian Kg Baru Balakong
Seri Kembangan
43300, Selangor
Tel: (03) 89626252
Country of Origin: Malaysia
Membership: Associate
MY CO2 (PG) SDN BHD
www.myco2.com.my
SERVICES
1. Laboratory testing
a. Cleanliness test
-Polar Extractable Inorganics
-Non – Polar Organics : Total Hydrocarbon
-Total organic carbon
-Residual acid
-Particulate residue
b. Microbiological test
Bioburden, Endotoxin, Sterility testing, In vitro cytotoxicity
c. Water testing using ICP-OES & ICP-MS
2. Environmental monitoring & DOSH assessment
3. ESG Reporting
COMPANY NAME & ADDRESS
16, Lengkok Kikik 1
Taman Inderawasih, Prai
13600 Penang
Tel: (04) 380 8282
Country of Origin: Malaysia
Membership: Associate
KHTP BIO-ANALYTICAL LABORATORY SDN BHD
SERVICES
Ethylene Oxide Residual (EO) testing in medical devices
KBio also provides a wide range of microbiology-related medical device testing to help you validate your sterilization process in accordance with national and international standards. Test applicable:
1- Bioburden
2- Bacteriostasis and Fungistasis Test (B/F)
3- Product Sterility
4- Biological Indicator
COMPANY NAME & ADDRESS
Ground Floor, KTechno Centre
Kulim Hi Tech Park
09090 Kulim Kedah
Tel: 604-6147466
Country of Origin: Malaysia
Membership: Associate
SCHNEIDER ELECTRIC INDUSTRIES (M) SDN BHD
SERVICES
Plant digitalization services, sustainability consulting services
Plant energy management services
COMPANY NAME & ADDRESS
Level 19, Tower B, Plaza 33
No 1 Jalan Kemajuan, Seksyen 13
Petaling Jaya 46200 Selangor
Country of Origin: USA
Membership: Associate
GRAND TEN HOLDINGS SDN BHD
SERVICES
Medical Device Sterilization using Gamma Technology
COMPANY NAME & ADDRESS
Grand Ten Holdings Sdn Bhd
Plot PT5754, Jalan 2, Kawasan Perusahaan Bandar Baru Salak Tinggi, Sepang, 43900 Selangor, Malaysia
Tel: 603-8705 5995
Country of Origin: Malaysia
Membership: Full
DKSH MALAYSIA SDN BHD
SERVICES
Distribution of Medical Devices
COMPANY NAME & ADDRESS
DKSH Malaysia Sdn Bhd
B-11-01, The Ascent, Paradigm,
No.1, Jalan SS7/26A, Kelana Jaya,
47301 Petaling Jaya, Selangor Darul Ehsan
Country of Origin: Malaysia
Membership: Associate
EUREMED SDN BHD
Products manufactured
Single to Multi-Lumens and Single to Multi Layer medical tubing.
COMPANY NAME & ADDRESS
Euremed Sdn Bhd
125, Jalan Ekoperniagaan 4, Eco Business Park II,
Senai, 81400 Johor
Country of Origin: Malaysia
Membership: Associate
INSULET MALAYSIA SDN BHD
Products manufactured
General active medical devices, namely Omnipod 5 Automated Insulin Delivery System.
COMPANY NAME & ADDRESS
Insulet Malaysia Sdn Bhd
No 5 Jalan Persiaran Bioteknologi
Kawasan Perindustrian SILC
Iskandar Puteri, 79200 Johor
Country of Origin: USA
Membership: Associate
SMOOTHBOR PLASTICS MALAYSIA SDN BHD
Products manufactured
Medical Tubes
COMPANY NAME & ADDRESS
Smoothbor Plastics (Malaysia) Sdn Bhd
No 8, Jalan I-Park SAC 2,
Taman Perindustrian I-Park SAC,
Senai, 81400 Johor
Country of Origin: USA
Membership: Associate
SPECTRUM (KELPAC MEDICAL SDN BHD)
Products manufactured
Medical Tubes
COMPANY NAME & ADDRESS
Kelpac Medical Sdn Bhd
No. 10, Jalan Laman Setia 7/3,
Setia Business Park
Gelang Patah, 81550 Johor
Country of Origin: USA
Membership: Associate
| www.spectrumplastics.com |
ROCHE DIAGNOSTICS MALAYSIA SDN BHD
Products manufactured
In vitro diagnostics (IVDs)
COMPANY NAME & ADDRESS
Roche Diagnostics Malaysia Sdn Bhd
B-20-1, Level 20, The Ascent,
Paradigm, No. 1, Jalan SS7/26A
Petaling Jaya
47301 Selangor
Country of Origin: Switzerland
Membership: Associate
| https://www.roche.com.my/ |
LGI TECHNOLOGY PENANG SDN BHD
Products manufactured
Labels and fabrications, die-cut polymer film and foam products
COMPANY NAME & ADDRESS
LGI Technology Penang Sdn Bhd
No 6, 8 & 10, Lorong Mak Mandin 5/8
Kawasan Perindustrian Mak Mandin
Butterworth, 13400 Penang
Country of Origin: USA
Membership: Associate
| www.cleanmarklabels.com |
Products manufactured
Custom made automated machine
COMPANY NAME & ADDRESS
Lanco Integrated (M) Sdn Bhd
PT 5887, Jalan Cassia Selatan 3/8
Taman Perindustrian Batu Kawan
Simpang Ampat
14100 Penang
Country of Origin: USA
Membership: Associate
| https://lancointegrated.com/ |
Products
Premium healthcare and personal protective products
COMPANY NAME & ADDRESS
Mun Global Sdn Bhd
Lot 26, Jalan Perusahaan 1, Amari Business Park,
Kawasan Perindustrian Batu Caves,
Batu Caves, Selangor, 68100
Tel: (03) 617-76488
Country of Origin: Malaysia
Membership: Associate
| https://munglobal.com/ |
Products
Vision Care Packaging
Medical Device Packaging
COMPANY NAME & ADDRESS
Harleigh (Malaysia) Sdn Bhd
No. 4 Jalan Tahana
Tampoi Industrial Estate
Johor Bahru
80350 Johor
Tel: (07) 2361263
Country of Origin: Malaysia
Membership: Associate
| www.shin-nippon.com.my |
Managing Director and Site Leader, Smith & Nephew
Frederic Rebetez is the Managing Director & Site Leader for Smith & Nephew’s new greenfield manufacturing site in Penang, Malaysia. Fred oversees all Malaysian operations from manufacturing and distribution of Orthopedics products around the globe.
He is an expert in driving Operational Excellence and pioneering initiatives like the greenfield projects, significant enhancements to Quality Management Systems, and the successful registration of new sites for prominent certifications such as ISO 13485 & MDSAP.
He also has experience ranging from reshaping Quality Management Systems, successfully navigating FDA inspections, championing new product introductions to integrating Lean Manufacturing and Six Sigma methodologies for optimized operations.
His academic pursuits are complemented by an EMBA in Management of Technology from EPFL Lausanne, certifications in Lean Manufacturing and Six Sigma from Johnson & Johnson, and a Master’s Degree in electronics engineering.
He is also recognized for his leadership dynamism, analytical acumen, and an unwavering commitment to enhancing product safety and operational excellence. He has strong partnerships, managing cross-functional teams, and his leadership ethos is rooted in fostering engagement and continuous improvement.
Fred relocated from Switzerland to Penang with his wife, Amanda.
Senior APAC Regional HR Director
Tan Lin Im is the APAC Senior HR Director at Teleflex Medical, bringing 28 years of HR professional experience, including 21 years in the electronics industry before transitioning into the medical sector.
A certified ICF coach, she is passionate about people and organizational development, and also serves as the Talent Development Subteam Co-Lead under the Association of Malaysian Medical Industries (AMMI) and Committee member in MyMahir Council for the Medical Industry under TalentCorp.
AMMI Director/ Senior Vice President, Operations & Head of Centre of Excellence IV Access, B. Braun Medical Industries
Christian joins B. Braun Medical Industries in Malaysia with over 22 years of experience serving the Group in Germany, starting at the Avitum division. He then moved up through various local and global functions across the company, which included global strategic Portfolio Management, Marketing, OPEX, Production Management, Controlling, Investment and Projects.
Prior to this role, he was leading a subsidiary of B. Braun as Managing Director, where he was responsible for the overall management of the site. There, he developed a production and plant strategy through 2030.
Christian graduated from the University of Applied Sciences, Ansbach, Germany in Industrial Engineering with focus on Medical Technologies
APAC Head of Supplier Quality, Dexcom
Ong Chee Kean is APAC Head of Supplier Quality at Dexcom Malaysia and with the company for 4 years since start up.
Having over 20 years of experience in various quality functions and different industries like electronics contract manufacturers and medical devices industries
Regional Research & Development Manager
Amcor Flexibles Asia Pacific
Dr. Ng TianWei is a seasoned professional with over two decades of
experience in the flexible packaging industry. He holds both a Bachelor’s degree in Chemical Engineering and a PhD in Mechanical Engineering from Michigan Technological University, USA. His extensive career has been marked by significant contributions to research and development for Amcor Flexibles Asia Pacific.
As a Regional R&D Manager of Amcor Flexibles Asia Pacific, Dr. Ng has played a pivotal role in driving projects focused on healthcare and sustainability, reflecting his commitment to innovation and excellence in the industry.
Scheme Manager & Technical Specialist, Global Orthopaedic & Dental Technical Team, BSI
eon graduated from the Graduate Institute of Dental Science (Master), Taipei Medical University, and the Department of Biomedical Engineering (Bachelor), Chung Yuan Christian University. He is currently a doctoral candidate (Ph.D. candidate) at the School of Dentistry, Taipei Medical University.
With a background in biomedical engineering and biomaterials, Leon began his career working with a medical device manufacturer as a Senior R&D Engineer. He was mainly responsible for new product design and development, as well as project management—especially in areas such as product design, testing, verification, gamma-ray sterilization validation, clinical evaluation, and clinical follow-up. After four years, he was promoted to Document Control and QA Department Supervisor, in charge of Quality Management Systems (ISO 9001:2008), Medical Device Management Systems (ISO 13485:2003), and all design control documentation. He also served as the Risk Management Team Leader, Internal Audit Team Leader, Clinical Evaluation Team Member, Clinical Follow-Up Team Member, and Internal Trainer. At the same time, Leon was also a lecturer and trainer for several industry training centers.
Leon has been with BSI for over ten years. His current role is Scheme Manager and Technical Specialist of the BSI Global Orthopedic and Dental Devices Team, responsible for generating and maintaining the schemes related to medical device CE certification to ensure compliance with regulatory requirements from the Notified Body and supporting operations with local teams.
Leon’s responsibilities at BSI also include serving as a Technical Specialist for technical file reviews. He has also been the contact point for manufacturers, handling inquiries and certification arrangements with his strong knowledge and excellent communication skills.
Vice-President Sustainability,
B. Braun Medical Industries
Graham has made Malaysia his home for over 27 years. Born in the Middle East and raised in the UK, he brings a diverse background to his professional journey.
With extensive experience in procurement and sustainability roles across the Asia Pacific region, Graham has worked in various sectors, including Electrical & Electronics, Consultancy, and Pharmaceuticals, before venturing into Medical Technology.
Graham joined B. Braun in 2015 as Vice President and Head of Procurement for the Asia Pacific region. In addition to this role, he has been instrumental in advancing sustainability initiatives within the company.
In 2024, Graham transitioned to a newly established position as Vice President of Sustainability for B. Braun in Asia Pacific. In this role, he is dedicated to implementing sustainability strategies, policies, and programs that reflect B. Braun’s commitment to social responsibility and environmental sustainability throughout the region.
Head, Quality and Regulatory, Roche Diagnostics Malaysia
Yean Ting, Heads the Quality Regulatory Access and Policy team in Roche Diagnostics Malaysia. An experienced regulatory and quality professional, Yean Ting has worked across multiple segments of the healthcare industry including pharmaceutical, medical device and In-Vitro Diagnostic sector in leadership roles. Ash a professional with a progressive outlook, she has built and executed strategies to ensure regulatory and quality compliance in the organizations.
Yean Ting takes pride in being a strong industry advocate, leading the Malaysian Medical Device Association (MMDA) as Secretary to the association and representing Malaysia’s medical device stakeholders as Malaysia Representative in GHWP and holding leadership position as Co-Chair of WG5 focusing on Clinical Evidence.
She brings the industry players together to offer Malaysia’ on the industry’s latest developments and create a platform to bridge ideas and feedback between the government and the private sectors.
Yean Ting promotes, develop and establish positive culture within organizations and passionate in driving technical and profession expertise in the Medical Device industry, keeping pace with the ever-changing industry landscape.
VP, Global Sterilization & Sterility Assurance, Boston Scientific
Steve leads the Boston Scientific Global Sterilization and Sterility Assurance Team and serves as a strategic leader within the global supply chain organization, overseeing all aspects of sterilization processes, sterility assurance programs, and contract sterilization globally.
Steve has a broad background with more than 40 years of experience in microbiology, R&D, engineering, sterilization and quality. Prior to joining Boston Scientific, he held roles with Johnson & Johnson, Alcon and Acelity leading global operations engineering and sterility assurance functions.
Steve started his career with Boston Scientific at Marlborough corporate office, as VP Quality Assurance Global Services. Prior to joining global supply in his current position, he held a divisional role as VP, Quality Peripheral Intervention and Global Sterility Assurance.
Vice President, Manufacturing Plant Management of Alcon Johor Sdn. Bhd. (also known as CIBA Vision Johor Sdn. Bhd.). The plant is based at Port of Tanjung Pelepas (PTP), Johor, Malaysia.
Dr. James has held this position since August 2016, leading operations for the manufacturing of renown Air Optix ® sterile contact lenses for refractive error correction and as bandage lenses for the global market. He also is a
Leadership and Achievements
Under Dr. James’s leadership, Alcon Johor has achieved multiple recognitions, including:
Dr. James leads multiple corporate social responsibility (CSR) initiatives through the Alcon in Action (AiA) platform, including:
Dr. James Jayadeva Govindasamy is known as a visionary leader who champions employee welfare, environmental sustainability, and community development. He has successfully positioned Alcon Johor as a benchmark of excellence in Malaysia’s medical device manufacturing industry.
Chief Executive
Dr. Muralitharan Paramasua, is the Chief Executive of Medical Device Authority, Ministry of Health Malaysia since 15th February 2023. Before being appointed as Chief Executive in February 2023, Dr. Muralitharan served in Ministry of Health Malaysia as an Administrative and Diplomatic Officer in various positions for 9 years.
Prior to joining MOH, Dr. Muralitharan was also once served at the Ministry of Natural Resources and Environment for 7 years from 2011 to 2017 and was responsible for international affairs of the ministry including free trade negotiations with different countries. Dr. Muralitharan earned his PhD in International Economy from University of Malaya. He received his Master’s Degree in Criminal Justice, and his Bachelor’s Degree in Biohealth Science from the University of Malaya.
Head of Manufacturing APAC, Teleflex Medical
Mr Baskaran is employed, since 2019, by Teleflex Medical Sdn Bhd (wholly owned by Teleflex Incorporated, headquartered in Wayne Pennsylvania, US) and currently holds the position as Head of Manufacturing for APAC Region. He is a member of the Board of Directors in Teleflex Medical Sdn Bhd. He oversees the Manufacturing Operations of all the 4 Teleflex Manufacturing Sites in Malaysia & India with over 4000+ employees.
He has over 33 years of Operations experience in various industry including Electronics, FMCG, & Medical Device, particularly, in the field of manufacturing, engineering, environment, safety, health, security, sustainability and quality having held various positions shaping the operating environment. Prior to joining Teleflex, Mr Baskaran held various operations positions in numerous multi-national corporations including Texas Instruments and SC Johnson.
AP Leader- Regulatory & Standards, DuPont™ Tyvek® Healthcare Packaging
Products
Peritoneal Dialysis Systems, Solutions & Services · Hemodialysis Systems & Dialyzers · Theranova Dialyzer for HDx Therapy
COMPANY NAME & ADDRESS
B-21-3, Level 21, The Ascent Paradigm,
No 1, Jalan SS7/26A, Kelana Jaya,
47301, Petaling Jaya, Selangor
Tel: +603-7611 6899.
Country of Origin: UK
Membership: Full
Website: https://www.vantive.asia/
Services
EtO Sterilisation with active degassing chamber
COMPANY NAME & ADDRESS
Lot 5-3, Zon Industri Fasa 2,
Kulim Hi-Tech Park,
Kulim, 09000 Kedah
Tel: (+6012) 3760690
Country of Origin: Malaysia
Membership: Associate
Website: http://gt2healthcare.com
Services
Instruction Manuals and Labels Technology
COMPANY NAME & ADDRESS
463, Lorong Ayam Didik 2,
Taman Ria Jaya Light Industrial Park
Sungai Petani, 08000 Kedah
Tel: (+6012) 9128005
Country of Origin: Malaysia
Membership: Associate
Website: https://thunderprint.com.my/
