26 March 2026: AMMI Roundtable with Deputy MITI Minister

Abbott Penang
(St. Jude Medical Operations (Malaysia) Sdn. Bhd)
www.abbott.com

COMPANY NAME & ADDRESS

Abbott Penang
Plot 102, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Industrial Zone,
Penang, Malaysia

Tel: 04-810 1000
Fax: 04-810 1001

Parent company: USA
Membership: Full

WHAT WE DO
Abbott’s manufacturing facility in Bayan Lepas, Penang, established in 2009, specializes in producing high-tech, life-saving cardiovascular devices, including pacemakers, implantable cardioverter defibrillators (ICDs), and cardiac monitoring leads

Ambu Sdn Bhd
www.ambu.com

ADDRESS

Lot 69B Lintang Bayan Lepas 6 Phase IV,
11900 Penang, Malaysia

Tel: 04-252 9000
Fax: 04-644 8932

Parent company: Denmark
Membership: Full

WHAT WE DO
The Penang facility is responsible for producing single-use endoscopes (pulmonology, urology, ENT, GI) and other medical devices, shipping millions of units globally.

Ansell Global Trading Center (Malaysia) Sdn. Bhd.
www.ansell.com

ADDRESS

Prima 6, Prima Avenue, Block 3512,
Jalan Teknokrat 6, 63000
Cyberjaya, Malaysia.

Tel: 03-8310 6688
Fax: 03-8318 6699

Parent company: Australia
Membership: Full

WHAT WE DO
Ansell Malaysia (Ansell N.P. Sdn. Bhd./Ansell Global Trading Center) is a major manufacturing and commercial hub for Ansell Limited, a global leader in personal protection solutions.

We manufacture, develop, and distribute high-performance protective gloves, garments, and safety products for the healthcare, industrial, chemical, and life sciences sectors.

Medical Device products include sterile surgical gloves, single-use examination gloves, and operating room consumables for hospitals and clinics.

Amcor Flexibles Asia Pacific

(Bemis Asia Pacific Sdn Bhd)
www.amcor.com

ADDRESS

Lot 823, Jalan Subang 5, Taman Perindustrian Subang USJ 1,
47600 Subang Jaya, Selangor, Malaysia.

Tel: 03- 8021 0998 (General Line)
Fax: 03- 8021 0000

Parent company: USA
Membership: Full

WHAT WE DO
Amcor Malaysia is a key hub for Amcor Flexibles Asia Pacific, specializing in developing and manufacturing advanced healthcare packaging solutions. The company produces medical-grade packaging, including sterile barrier systems, pouches, and top/bottom substrates for medical devices, pharmaceuticals, and diagnostics.

Ain Medicare Sdn Bhd
www.ainmedicare.com.my

ADDRESS

Jalan 6/44, Kawasan Perindustrian Pengkalan Chepa 2,
Kota Bharu 16100, Kelantan.

Tel : +609 7743 388
Fax : +609 7742 205

Parent company: Malaysia
Membership: Full

WHAT WE DO
Ain Medicare is a leading manufacturer of sterile pharmaceutical products. They specialize in producing intravenous infusions, hemodialysis concentrates, peritoneal dialysis solutions, and small-volume injections for healthcare, including Blow-Fill-Seal (BFS) technology and contract manufacturing (OEM).

Allen Healthcare Products (M) Sdn Bhd
www.ahpbio.com

ADDRESS

17, Lorong Nagasari 2, Taman Nagasari,
13600, Perai Penang, Malaysia

Tel: 604-3901168
Fax: 604-3831334

Parent company: Malaysia
Membership: Full

WHAT WE DO

Allen Healthcare Products (AHP) is a biotechnology company established in 1996 that specializes in manufacturing and supplying in-vitro diagnostics (IVD) and rapid, point-of-care (POC) test kits. Their product range includes infectious disease, fertility, and drug-of-abuse tests (e.g., HIV, Hepatitis B, Dengue, Malaria).

APS Medical Sdn Bhd
www.apsmedical.com.my

ADDRESS

28-32 Jalan Teluk Batu 36/2, Batu 4 1/2,
Jalan Kebun, Seksyen 36, 40470 Shah Alam,
Selangor, Malaysia.

Tel: 03-5162 2618
Fax: 03-5162 2619

Parent company: Malaysia
Membership: Full

WHAT WE DO

A.P.S Medical manufactures and distributes single-use, disposable medical devices. The company specializes in producing surgical, anesthetic, respiratory, and gastroenterology products, such as suction tubes, extension tubes, and mucus extractors, operating within a Class 100K clean room.

Balchem Sdn Bhd
www.balchem.com

ADDRESS

37, Lorong Sungai Puloh 1A/KU6,
Taman Teknologi Gemilang, Kawasan Perindustrian Sungai Puloh,
41050 Klang Selangor.

Tel : 03-3290 2263
Fax : 03-3290 2016

Parent company: USA
Membership: Full

WHAT WE DO
Balchem Malaysia, formerly Stereo Sdn Bhd, is a key component of Balchem’s Performance Gases – Asia Pacific division. We specialize in the sales, distribution, and handling of specialized gases, most notably ethylene oxide for medical device sterilization

Becton-Dickinson Sdn Bhd
www.bd.com

ADDRESS

Lot 57C, Lorong Perusahaan 5,
Kulim Industrial Estate, 09000
Kulim, Kedah, Malaysia

Tel: 04 – 4801300
Fax: 04 – 4891737

Parent company: USA
Membership: Full

WHAT WE DO
Becton-Dickinson (BD) is a major global medical technology company, operating since 1987, focused on advancing health through manufacturing, research, and distribution of medical devices, instrument systems, and reagents. They specialize in patient/healthcare worker safety, diagnostics, and medication management with facilities in Kulim (manufacturing), Penang, and Kuala Lumpur (commercial/shared services).

Main products include hypodermic needles/syringes, intravenous (IV) catheters, automated medication management systems, pre-fillable drug delivery systems, diagnostic instruments, and flow cytometry tools.

B.Braun Medical Industries Sdn Bhd
www.bbraun.com.my

ADDRESS

Bayan Lepas Free Industrial Zone, P O Box 880,
10810 Penang, Malaysia

Tel: 04-632 3100
Fax: 04-643 3750

Parent company: Germany
Membership: Full

WHAT WE DO
B. Braun offers a comprehensive portfolio of medical devices, pharmaceutical solutions, and surgical instruments, with major manufacturing operations in Penang producing intravenous catheters for global markets. Key product areas include infusion therapy (pumps, sets), nutrition therapy, anesthesia, and surgical instruments/sutures.

Boston Scientific Medical Device (Malaysia) Sdn Bhd
www.bostonscientific.com

ADDRESS

PMT 741, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan 14100,
Bandar Cassia,Penang, Malaysia

Tel : + 604-5556688
Fax : +604-5556699

Parent company: USA
Membership: Full

PRODUCTS

Boston Scientific in Penang, Malaysia, operates a major manufacturing facility and a global distribution center in Batu Kawan, focusing on producing and distributing advanced medical devices for cardiology, endoscopy, and urology. It serves as a key hub for Asia-Pacific, manufacturing millions of devices like balloon catheters and laser fibers, while also managing regional supply chain, finance, and R&D activities.

Alcon Johor
(Ciba Vision Johor Sdn Bhd)
www.alcon.com

ADDRESS

Ciba Vision Johor Sdn Bhd
No.1 Jalan DPB/5,
PelabuhanTanjung Pelepas
81560, Gelang Patah, Johor
Malaysia

Tel: (07) 504 3636
Fax: (07) 507 1759

Parent Company: Switzerland
Membership: Full

WHAT WE DO

CIBA Vision Johor Bahru (officially known as Alcon Johor Sdn. Bhd.) is a major manufacturing facility located in the Pelabuhan Tanjung Pelepas (PTP) Free Trade Zone in Johor, Malaysia.

Established in 2005, the plant is a critical, high-tech manufacturing hub for Alcon globally, specializing in the production of, and research into, high-quality, sterile, soft contact lenses. Contact Lens

Cochlear Malaysia Sdn Bhd
www.cochlear.com

COMPANY NAME & ADDRESS

Unit UG1, Upper Ground Floor, Vertical Podium,
Avenue 3, Bangsar South, No.8, Jalan Kerinchi,
59200, Kuala Lumpur, Malaysia.

Tel : +603 2282 3839
Fax : +603 2282 3839

Parent company: Australia
Membership: Full

WHAT WE DO

Cochlear Malaysia operates as a major global hub for Cochlear Limited, focusing on the manufacturing, repair, and distribution of implantable hearing devices, such as the Nucleus cochlear implant and Baha bone conduction implants.

Located in Kuala Lumpur, this facility supports the production of hearing implant sound processors for more than 180 countries, acting as a global center of excellence for repairs and manufacturing.

Diptech Industries Sdn Bhd
www.diptech.com.my

COMPANY NAME & ADDRESS

No.11 Jalan Angsana 1/3, Taman Perindustrian Angsana,
08000 Sungai Petani, Kedah

Tel : 604 422 3688
Fax : 604 424 0941

Parent company: Malaysia
Membership: Full

WHAT WE DO

Diptech Industries founded in 1998 and based in Malaysia, is an ISO-certified OEM manufacturer specializing in high-quality, latex and latex-free medical dipped rubber products. We produce airway devices, breathing bags, and test lungs for global clients, with expertise in custom, durable medical rubber goods.

Our products: Single Coated Medical Tapes, Double Coated Medical Tapes, Medical Woven & Non Woven Tapes, Release Liners Hydrocolloids. Leap Pads etc.

DuPont Malaysia Sdn Bhd
www.dupont.com

COMPANY NAME & ADDRESS

DuPont Malaysia Sdn Bhd
Level 7, Menara CIMB,
Jalan Stesen Sentral 2, Kuala Lumpur Sentral,
50470 Kuala Lumpur

Tel: 603-285 90700
Fax: 603-285 99079

Parent company: USA
Membership: Full

WHAT WE DO

DuPont plays a critical role in the Malaysian medical device industry, providing advanced, sterile, and sustainable packaging materials to support the country’s status as a major regional MedTech hub.

With a strong presence in Johor through its Spectrum™ Plastics Group, DuPont supplies high-performance materials like Tyvek® for sterile barrier systems and is actively involved in sustainable, high-volume manufacturing solutions in the region.

Epsilon Medical Devices Sdn Bhd
epsilon-group.com

PRODUCT
Medical Devices

COMPANY NAME & ADDRESS
Lot 5271, Jalan Perusahaan 3 Kamunting Industrial Area
34600 Kamunting, Perak

Tel : 05-8913158
Fax : 05-8911266

Parent company: Malaysia
Membership: Full

Intersurgical Medical Sdn. Bhd
(formerly known as Engineered Medical Systems Malaysia Sdn. Bhd)
www.intersurgical.com.my.

COMPANY NAME & ADDRESS

993, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat,
Pulau Pinang.

Tel : +604 504 1252
Fax : +604 504 1253

Parent company: UK
Membership: Full

PRODUCT
Comprehensive range of medical devices for airway management, anesthesia, critical care, and oxygen & aerosol therapy. Product lineup includes i-gel supraglottic airways, breathing systems, filters, masks, and, in particular, Starmed CPAP/NIV helmets.

Fresenius Medical Care Production Sdn Bhd
www.freseniusmedicalcare.my

COMPANY NAME & ADDRESS

Lot 34618 PT29466, Bandar Enstek,
Mukim Labu, 71760 Bandar Enstek,
Negeri Sembilan.

Tel: 606-791 5334
Fax: 606-791 5336

Parent company: Germany
Membership: Full

PRODUCTS
We offer a full range of haemodialysis machines, peritoneal dialysis systems, water treatment systems, dialysis consumables, medical treatment chairs and other related products.

Haemonetics Malaysia Sdn Bhd
www.haemonetics.com

COMPANY NAME & ADDRESS

Plot 308, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan,
14100 Simpang Ampat,
Seberang Perai Selatan, Penang.

Tel: 604-643 3897

Parent company: USA
Membership: Full

PRODUCTS
Apheresis devices and related blood management products for the global market.

Hospitech Manufacturing Services Sdn Bhd
hospitech.my

COMPANY NAME & ADDRESS

Sub Lot, 1 Lot 6536, Batu 6 Jalan Bukit Kemuning,
40460 Shah Alam.

Tel: 03-5122 5199
Fax: 03-5122 5204

Parent company: Malaysia
Membership: Full

PRODUCT
Surgical tubing, suction catheters, disposable dressing kits/respirators, oxygen mask, nasal cannula, PVC catheters, bandages & gauze, burn sets, thoracic drainage system, mucous extractors, surgical connecting tubes, underwater chest drainage bottles

Ideal Health Care Sdn Bhd
www.idealcare.com.my

COMPANY NAME & ADDRESS

Ideal Health Care Sdn Bhd

Lot PT 60598
Kawasan Perindustrian LPK Fasa 1
08000 Sungai Petani Kedah
Tel: 04-444 6875
Fax: 04-444 5975

Membership: Full

PRODUCTS

Manufacturer and distributor of medical disposable and healthcare products, offering solutions in anesthesia, respiratory care, urology, and PPE.

Medical Disposable Products include:

– Foley catheters
– IV Catheters
– Endotracheal tubes
– Tracheotomy tubes
– IV Infusion Sets
– Blood Transfusion Sets
– Respiratory Care Products
– Surgical Face Masks
– Procedural Sets

ITL Asia Pacific Sdn Bhd
www.itl-limited.com

COMPANY NAME & ADDRESS

Plot 17B, Lorong Bemban 2, Bemban Industrial
Estate, 31000, Batu Gajah Perak

Tel: 05-3217 586
Fax: 05-3217 498

Parent company: Australia
Membership: Full

PRODUCTS
A comprehensive range of high-quality medical devices focused on blood sampling, collection, and transfer, as well as clinical procedure kits. Key products include the SampLok® blood sampling kits, DonorCare® needle guards, and various IV start kits, procedure packs, and sharps safety devices

KLS Martin Malaysia Sdn Bhd
www.klsmartin.com

COMPANY NAME & ADDRESS

No.1193, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat, Penang.

Tel : +604 506 2380
Fax : +604 506 2303

Parent company: Germany
Membership: Full

PRODUCT
We offer instruments, implants, HF units, surgical laser systems, OR lights, medical supply units, telemedicine, etc.

INTEGER (Lake Region Medical Sdn Bhd)
www.integer.net

COMPANY NAME & ADDRESS

No. 91-B, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Penang, Malaysia.

Tel: 04-810 1818
Fax: 04-643 1232

Parent company: USA
Membership: Full

WHAT WE DO
We specialize in the design and manufacturing of high-quality medical device components, particularly for cardiology, vascular, and neurovascular markets. Key products include precision catheters, guidewires, introducers, and, as part of the Integer portfolio, medical textiles and device component

Cardinal Health
(Mediquip Sdn Bhd)
www.cardinalhealth.com

COMPANY NAME & ADDRESS

Padang Lati, Mukim Paya, Jalan Santan,
02450 Beseri, Perlis, Malaysia.

Tel: 04-938 1411
Fax: 04-938 2150

Parent company: USA
Membership: Full

PRODUCTS
Distributor and manufacturer of medical, surgical, and laboratory products, providing solutions for hospitals, labs, and home health. Our portfolio includes high-quality surgical gloves, infection control products (masks, apparel), wound care, fluid management, and lab consumables.

Meditop Corporation (M) Sdn Bhd

www.top-tokyo.co.jp

COMPANY NAME & ADDRESS

Lot 3, Persiaran Usahawan,Taman iks, Seksyen 9,
43650 Bandar Baru Bangi, Selangor.

Tel: 03-8924 0999
Fax: 03-8925 8660

Parent company: Japan
Membership: Full

PRODUCT
Infusion pumps, syringe pumps, catheters, and IV devices.

Medical Innovation Ventures Sdn Bhd
www.mediven.com.my

COMPANY NAME & ADDRESS

Medical Innnovation Ventures Sdn Bhd
Level 4, Biopharmaceutical Block,
IPHARM, NIBM, MOSTI, Block 5-A, Halaman Bukit Gambir
Gelugor, 11700 Penang
Malaysia

Tel: (+604) 6562824
Fax: (+604) 6562824

Website: www.mediven.com.my

Parent Company: Malaysia
Type of membership: Associate

WHAT WE DO
We are a molecular diagnostics company (founded in 2012) that researches, develops and manufactures advanced diagnostic kits for infectious diseases. We specialize in fast, affordable, and accurate point-of-care, molecular tests—such as GenoAmp™ and ProDetect™—for diseases like dengue, Zika, and COVID-19.

Molnlycke Health Care Sdn Bhd

www.molnlycke.com

PRODUCT
Surgical Gloves and Dental Gloves

COMPANY NAME & ADDRESS

Lot 12A, Jalan Hi-Tech 7, Industrial Zone Phase 2,
Kulim Hi-Tech Park,
09090 Kulim, Kedah

Tel : +604-402 6500

Parent company: Sweden
Membership: Full

Muzamal Industries Sdn Bhd
www.muzamal.com

PRODUCT
Disposable syringe with needle & without needle, specimen container & sutures

COMPANY NAME & ADDRESS
Muzamal Industries Sdn Bhd
Lot 21, Jalan 3A, Kawasan Perindustrian Cheras Jaya 43200
Cheras Selangor
Tel: 603 -90763080
Fax: 603- 90803098

Parent Company :Malaysia
Membership : Associate

Orthomedic Innovations Sdn Bhd
www.orthomedic.com.my

PRODUCT
Orthopaedic Instruments and Implants

COMPANY NAME & ADDRESS
188-D, Jalan Sultan Azlan Shah, Sungai Tiram,
11900 Bayan Lepas, Penang, Malaysia.

Tel: +604 644 5139
Fax: +604 644 9139

Parent company: Malaysia
Membership: Full

Owen Mumford Sdn Bhd
www.owenmumford.com

PRODUCT
1. Packing of Pen Needles
2. Packing of Vaginal Dilators
3. Manufacture of Single-use Sterile Safety Lancets

COMPANY NAME & ADDRESS
No. 21, Jalan Bioteknologi 3 Kawasan Perindustrian SiLC Nusajaya,
79200 Johor

Tel: +607 5539617
Fax: +607 5539617

Parent company: UK
Membership: Full

Tecan CDMO Solutions PN Sdn Bhd
www.paramit.com

PRODUCT
PCBA for genome sequencing machine

COMPANY NAME & ADDRESS
Tecan CDMO Solutions PN Sdn Bhd
Plot 372, Penang Science Park, Lorong Perindustrian Bukit Minyak 21, Taman Perindustrian Bukit Minyak, 14100 Simpang Ampat
Seberang Perai Tengah, Penang, Malaysia

Tel : 604-540 7155
Fax : 604-540 7111

Parent company: Switzerland
Membership: Full

PENTAX Medical (Penang) Sdn Bhd
https://www.pentaxmedical.com/

PRODUCT
OEM Manufacturing- Endoscopic system

SERVICES
Repair of the endoscopy (service for own brand only)

COMPANY NAME & ADDRESS
PENTAX Medical (Penang) Sdn. Bhd.
Plot 12 & 13, Fasa 4
Hilir Sungai Keluang 3
Bayan Lepas, 11900 Penang, Malaysia

Tel: 604 6379800

Parent Company: Japan
Membership: Full

Prent Malaysia Sdn Bhd
prent.com.my

PRODUCT
Custom supplier of precision plastic thermoforming

COMPANY NAME & ADDRESS
PTD102587, Jalan Cyber 14, Senai Ind Park IV,
81400 Senai, Johor, Malaysia.

Tel: 07- 599 7661
Fax: 07-599 7660

Parent company: USA
Membership: Full

Sanmina-SCI Systems (Malaysia) Sdn Bhd
www.sanmina.com

PRODUCT
Electronic manufacturing services of finished medical devices and printed circuit board assemblies.

COMPANY NAME & ADDRESS
Plot 202, Lorong Perusahaan Maju 9 Bukit Tengah Industrial Estate
13600 Perai, Penang.

Tel : +604 508 1228
Fax : +604 508 1233

Parent company: USA
Membership: Full

Sina-Sterilgamma Sdn Bhd
www.sinasterilgamma.com

PRODUCT
Services in Sterilisation Technology

COMPANY NAME & ADDRESS
Sina-Sterilgamma Sdn Bhd
1-1 Jalan Bandar Rawang 11
Pusat Bandar Rawang
48000 Province: Selangor
Malaysia

Tel: (603) 60912055
Fax: (603) 60936872

Parent Company: Malaysia
Membership: Associate

Sin Yong Guan Industries Sdn. Bhd.
www.syg53.com

PRODUCT
Medical PVC Compound and Plastic Tubing for Medical

COMPANY NAME & ADDRESS
8 Solok Rishah 2, Kwsn Perindustrian Silibin 30100 Ipoh, Perak, Malaysia.

Tel: 05-526 7231
Fax: 05-526 8491

Parent company: Malaysia
Membership: Full

Ensera (formerly SteriPack)
www.ensera.com

PRODUCT
Contract manufacturing of medical devices and pharmaceutical products

COMPANY NAME & ADDRESS
PT119992, Jalan Canang Emas 8 Telok Gong,
42000 Klang Selangor, Malaysia

Tel : 03-3167 3596
Fax: 03-3167 3597

Parent company: Ireland
Membership: Full

Straits Orthopaedic Sdn Bhd
www.straitsortho.com.my

PRODUCT
Orthopaedic Devices

COMPANY NAME & ADDRESS
Straits Orthopaedics (Mfg) Sdn Bhd
483, Tingkat Perusahaan 4A
Prai Free Industrial Zone
13600 Prai, Penang
Malaysia
Tel: 604-3831885
Fax: 604-3838178

Parent Company: Malaysia
Membership: Associate

Symmetry Medical Malaysia Sdn Bhd
www.tecomet.com

PRODUCT
Medical sterilizing cases, medical instruments and orthopaedic implants.

COMPANY NAME & ADDRESS
Plot 80C, Kawasan Perusahaan Bayan Lepas,
11900 Bayan Lepas, Penang, Malaysia.

Tel : 04-645 6802
Fax : 04-6445805

Parent company: USA
Membership: Full

Synergy Sterilisation (M) Sdn Bhd
www.steris-ast.com

PRODUCT
Sterilization –Gamma, sterilization –ETO lab service, post process inspections logistics, provision of sterilisation process of medical products.

COMPANY NAME & ADDRESS
Plot 203 Kuala Ketil Industrial Estate,
09300 Kuala Ketil, Kedah, Malaysia.

Tel: 04-415 2111
Fax: 04-415 2121

Parent company: USA
Membership: Full

Teleflex Medical Sdn. Bhd.
www.teleflexmedical.com

PRODUCT
Anaesthesiology, respiratory, urology and home care medical devices.

COMPANY NAME & ADDRESS
Lot No PT2577, Jalan Perusahaan 4 Kamunting,
34600 Kamunting Perak.

Tel : 05-891 5111
Fax : 05-891 2699

Parent company: USA
Membership: Full

Texchem Life Sciences Sdn Bhd
www.texchem-pack.com

PRODUCT
Disposable medical device and key components contract manufacturing.

SERVICES
Contract Manufacturinng and Polymer engineering solution

COMPANY NAME & ADDRESS
Lot 3, Jalan P/6 Kawasan Perindustrian Bangi,
Line 2, Bandar Baru Bangi 43650, Selangor.

Tel: +603-8925 0370
Fax: +603-8925 0317

Parent company: Japan
Membership: Full

Tomoe Malaysia Sdn Bhd
www.tomoeshokai.co.jp

PRODUCT
EO Sterilization Gas for Medical Devices

COMPANY NAME & ADDRESS
Lot 13, Jalan Kulim Hi-Tech 13,
Kulim Hi Tech Park Phase 3,
Kulim, Kedah 09000 Malaysia.

Tel : +604-492 4101
Fax : +604-492 4202

Parent company: Japan
Membership: Associate

Top Glove Sdn Bhd
www.topglove.com

PRODUCT
Latex powdered/ powder-free examination/sterile surgical gloves, nitrile powdered/ powder-free examination gloves, vinyl opowdered/ P-F examination gloves, household flocklined/Unlined gloves, coloured latex P-gloves(blue/green), green mint latex p-gloves, cleanroom gloves

COMPANY NAME & ADDRESS
Lot 4968, Bt 6 Jalan Teratai, Off Jalan Meru 41050 Klang

Tel: 03-3392 1992/1905
Fax: 03-3392 1291/8410

Parent company: Malaysia
Membership: Full

UWHM Sdn Bhd
www.uw-healthcare.com

PRODUCT
Disposable Oxygen Prefilled Humidifier, Disposable Oxygen Prefilled Nebulizer, Digital Oxygen Flow Meter, Digital Oxygen Humidifier Water Level & Humidity Sensor

COMPANY NAME & ADDRESS
UWHM Sdn Bhd
PMT 790, Jalan Cassia Selatan 5/2,
Taman Perindustrian Batu Kawan,
Bandar Cassia, Pulau Pinang,
14110, Malaysia.

Tel: 604-5855229
Fax: 604 – 5899677

Parent company: Malaysia
Membership: Full

BACTIGUARD (South East Asia) Sdn. Bhd
www.bactiguard.com

ADDRESS

No. 308, Jalan Perindustrian Bukit Minyak 18,
Penang Science Park, 14100 Penang, Malaysia.

Tel: 604-505 4241 / 505 9841
Fax: 604- 505 9367

Parent company: Malaysia
Membership: Full

PRODUCT
Surgical sutures, hernia meshes, wound management products, surgical implants and other surgical disposables.

Worldwide Medivest Sdn Bhd
www.wmsb.com.my

PRODUCT
Wound closure and surgical sutures

COMPANY NAME & ADDRESS
No. 2, Jalan Karyawan 4/KU7, Lorong Sg Puloh,
Taman Kapar Bestari, Kapar 42200, Selangor.

Tel: 603-3291 2625
Fax: 603-3291 2725

Parent company: Malaysia
Membership: Full

Zeito Plastic Components Sdn Bhd
www.zeito.com.my

PRODUCT
Manufacturing for Injection Molding Plastic Components & Assembly for Medical Devices.

COMPANY NAME & ADDRESS
Lot 9, Jalan CJ 1/7, Kawasan Perusahaan Cheras Jaya, Jalan Balakong, 43200 Cheras , Selangor Darul Ehsan.

Tel : 03-9074 9177
Fax : 03-9074 9096

Parent company: Malaysia
Membership: Full

Solventum Malaysia Sdn Bhd
www.solventum.com

PRODUCT
Dental Devices, Laboratory Equipment

COMPANY NAME & ADDRESS
Level 8, Block F, Oasis Square No.2, Jalan PJU1A/7A,
Ara Damansara, 47301 Petaling Jaya, Selangor.

Tel : 603-7884 2888
Fax : 603-7884 2902

Parent company: USA
Membership: Associate

Alliance Contract Manufacturing Sdn Bhd
www.acm-holdings.com

PRODUCT
Manufacture of medical devices and equipment

COMPANY NAME & ADDRESS
2006, Jln Jelawat
Seberang Jaya Industry Estate
Prai, 13700 Penang

Telephone : (604) 2912888
Fax : (604) 2912999

Country of Origin: Malaysia
Membership: Associate

Alcon Laboratories (Malaysia) Sdn Bhd
www.alcon.com

PRODUCT
Authorized Representative
Surgical equipment and contact lense care products

COMPANY NAME & ADDRESS
Alcon Laboratories (M) Sdn Bhd
Level 20-1, Tower B, Plaza 33
No.1, Jalan Kemajuan, Seksyen 13
Petaling Jaya
Selangor
46200 Malaysia

Tel : (603) 79481888
Fax (603) 79481888

Parent Company: Switzerland
Membership : Associate

Baxter Healthcare Sdn Bhd
www.baxter.com.my

COMPANY NAME & ADDRESS
B-21-3A, Level 21, The Ascent, Paradigm, No.1,
Jalan SS7/26A, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia.

Tel : 603-7611 6899
Fax : 603-7611 6800

Parent company: USA
Membership: Associate

Becton Dickinson Sdn Bhd
www.bd.com.my

PRODUCT
Diagnosis Instrument for Influenza A & B

COMPANY NAME & ADDRESS
Unit 24, LG 5 (Executive Wing), Hotel Equatorial,
1 Jalan Bukit Jambul, 11900 Bayan Lepas,Penang.

Tel : +604 640 5688
Fax : +604 640 5686

Parent company: USA
Membership: Associate

Biocon Sdn Bhd
www.biocon.com

PRODUCT
Biopharmaceutical manufacturing

COMPANY NAME & ADDRESS
No.1 Jalan Bioteknologi 1, Kawasan Perindustrian SILC,
15 Bandar Puteri, Johor, 79200, Malaysia.

Tel: 607-560 0000
Fax: 607-560 0098

Parent company: India
Membership: Associate

CCB Medical Devices Sdn Bhd
www.ccb-medical.com

PRODUCT
Injection and blow moulded parts made from various polymer, silicon and rubber. Medical tube extrusion, Assembly services.

SERVICES
Contract manufacturing services from R&D, molding
and assembly.

COMPANY NAME & ADDRESS
CCB Medical Devices Sdn Bhd
PMT 1124, Jalan Perindustrian
Bukit Minyak 8
Taman Perindustrian Bukit Minyak
Simpang Ampat, Penang
14100 Malaysia

Tel : 604 5040198
Fax 604 5040908

Parent Company: Germany
Membership : Full

Gem Impression Sdn Bhd
www.gem-i.net

PRODUCT

Manufacturing parts for medical devices – blister, nylon pin, nylon disc, len tray, printing & bending machine
Service Support

COMPANY NAME & ADDRESS
Gem Impression Sdn Bhd
9&11 Lorong Serunai 2
Sungai Bakap
14200 Penang, Malaysia

Parent Company: Malaysia
Membership: Associate

Integrated Plastic Kogyo (M) Sdn Bhd
http://www.ipk.com.my

PRODUCT
Single Use Safety Blood Lancet

COMPANY NAME & ADDRESS
Integrated Plastic Kogyo (M) Sdn Bhd
12, Jalan Teras 1,
Taman Industri Teras
Balakong
43300 Selangor, Malaysia
Tel: (03) 8961 6880
Fax : (03) 8961 9880

Website: www.ipk.com.my

Parent Company: Malaysia
Membership: Associate

Isofield Sdn Bhd
www.isofield.com

PRODUCT
Clean and sterile PPE

COMPANY NAME & ADDRESS
Isolfield Sdn Bhd
No. 6 Jalan Gudang 16/9, Seksyen 16
Shah Alam, Selangor, 40200
Malaysia

Telephone (012) 305-6895
Country of Origin: Ireland
Membership: Associate

Website www.isofield.com

Jabil Circuit Sdn Bhd
www.jabil.com

PRODUCT
Finished devices : Flu detector, Patient Bedside Monitor, Endoscope Reprocessor.
High Level Assembly : Thermal Cyclers (PCR), Sterilization.
PCBA : MRI, Ultrasound, Blood Analyzers, Oxygen Monitor, Cytometry and Hematology

COMPANY NAME & ADDRESS
Jabil Circuit Sdn. Bhd.
56 Hilir Sungai Keluang 1
Bayan Lepas Free Trade
Industrial Zone Phase 4
11900 Penang, Malaysia

Tel: (04) 6427975
Fax : (04) 6428001
Website www.jabil.com

Parent Company: United States
Type of membership: Full

Kobayashi Healthcare (Malaysia) Sdn Bhd
info-my@kobyashi.com

PRODUCT
Importer and Authorized Representatives – cooling gel sheets and heat patch

COMPANY NAME & ADDRESS

Kobayashi Healthcare (Malaysia) Sdn Bhd
50-2-2A, Level 2, Wisma UOA Damansara,
50, Jalan Dungun,
Damansara Heights
50490 Kuala Lumpur

Parent Company: Japan
Membership: Associate

Medtronic Malaysia Sdn Bhd
www.medtronic.com

PRODUCT
Medical Electronics Technology

COMPANY NAME & ADDRESS
B-23-1, The Ascent, Paradigm, No 1 Jalan SS7/26A, Kelana Jaya,
Petaling Jaya, Selangor, 47301, Malaysia

Tel : 603 -78838000
Fax : 603 – 78860474/4702

Parent company: USA
Membership: Associate

Nagoya Plastic Industry Sdn Bhd
http://www.nagoyaplastic.com

PRODUCT
Products: HME, Disposable Bronchoscopy etc.

Services Plastic Injection Moulding with Secondary Process
such as spray painting, printing and sub-assembly

COMPANY NAME & ADDRESS
Nagoya Plastic Industry Sdn. Bhd.
Lot 89, 90, 91, 1249, Jalan Aman 2,
Kawasan Perusahaan
Taman Makmur, Sungai Seluang
Lunas
Kedah, 09600 Malaysia

Tel: (+604) 4848434
Fax: (+604) 484461725

Website: www.nagoyaplastic.com

Parent Company: Malaysia
Type of membership: Associate

MIRA Medsource (Malaysia) Sdn Bhd
www.miramedsource.com

PRODUCT
Medical Device Sourcing for export to USA

COMPANY NAME & ADDRESS
35, 1st Floor, Jalan Todak 6,
Pusat Bandar Sunway Perdana,
13700 Seberang Jaya, Penang.

Tel: 604 383 8025
Hp: 6012 428 2311
Fax: 604 383 1845

Parent company: China
Membership: Associate

Parent Company: Malaysia
Type of membership: Associate

Multivac Sdn Bhd
www.multivac.com

PRODUCT
Packaging Machine

COMPANY NAME & ADDRESS
Lot 10-E, Pusat Teknologi Sunsuria, Jalan Teknologi,
Taman Sains Selangor, Kota Damansara,
47810 Petaling Jaya, Selangor Malaysia.

Tel : +603 61519885 / +603 61511885
Fax : +603 6143 6885

Parent company: Germany
Membership: Associate

Nihon Kohden Malaysia Sdn Bhd
nihonkohden.com.my

PRODUCT
Patient bedside monitors

COMPANY NAME & ADDRESS
Nihon Kohden Malaysia Sdn.Bhd.
Suite 15-13,Level 15, G Tower,
199 Jalan Tun Razak
Kuala Lumpur
50400, Malaysia

Tel: (603) 21610100
Fax: (603) 21612520

Parent Company: Japan
Membership: Associate

Polyplas Sdn Bhd
http://www.polyplassb.com/

PRODUCT
Manufacturing of plastic injection molding components

COMPANY NAME & ADDRESS
Polyplas Sdn Bhd
No 2056, Mukim 14,
Lorong IKS Bukit Minyak 5,
Taman IKS Bukit Minyak,
14000 Bukit Mertajam Penang
Tel: (04) 5070188
Fax: (04) 5078188

Parent Company: Malaysia
Membership: Associate

Prodelcon Sdn Bhd
http://www.psb.com.my

PRODUCT
Manufactured: Surgical instruments, Class 3 implantable parts, Precision molds and die sets, integrated automation solutions, High precision RF Microwave parts and assembly services.

COMPANY NAME & ADDRESS

Prodelcon Sdn Bhd
78 Lintang Bayan Lepas 7,
Phase IV
Bayan Lepas
11900 Penang, Malaysia

Tel: 604-6438913
Fax: 604- 6438914

Parent Company: Malaysia
Membership: Associate

Professional Tools & Dies Sdn Bhd
www.professional-tools.com

PRODUCT
1. Contract Manufacturing – Assembling of Semi-Finished and Finished Products / Modules.
2. Precision Plastic Injection Molding and Plastic Injection Mold Making (In-House).
3. Precision Sheet Metal Stamping and Sheet Metal Stamping Die-Making (In-House).

COMPANY NAME & ADDRESS
7118,Jalan Mak Mandin, Kawasan Perindusrian Mak Mandin,
13400 Butterworth, Penang, Malaysia.

Tel: 04-332 2335
Fax: 04-331 2337

Parent company: Malaysia
Membership: Associate

PMA Manufacturing Sdn Bhd

PRODUCT
Cleanroom and Non-Cleanroom Labels, Thermal Transfer Ribbons, Tapes, Medical Pre-Saturated Wipes and Disinfectant Sprays.

COMPANY NAME & ADDRESS
No. 11, Lintang Beringin 2, Diamond Valley,
Georgetown Penang 11960 Malaysia.

Tel: 04-626 1518
Fax: 04-626 5253

Parent company: Malaysia
Membership: Associate

Plastik STC Sdn Bhd
www.hlhightech.com

PRODUCT
Plastic injection moulding services.
Plastic injection mould fabrication.
Precision engineering machining parts.
Clean room class 8 plastic moulding.

COMPANY NAME & ADDRESS
No 7 Jalan TSB 9, Taman Industri Sg Buloh,
Sungai Buloh, 47000 Selangor, Malaysia.

Tel: 03-6157 5313
Fax: 03-6157 5318

Parent company: Malaysia
Membership: Associate

Silcotech Industry Sdn Bhd
www.silcotechindustry.com

PRODUCT
Silicone Injection Process

COMPANY NAME & ADDRESS
Silcotech Industry Sdn Bhd
No. A 153, Jalan 3,
Kawasan Perusahaan MIEL, Sungai Lalang Phase V
Sungai Petani
08000 Kedah
Malaysia

Telephone (604) 4419928
Fax (604) 4429928

Country of Origin: Malaysia
Membership: Associate

Website www.silcotechindustry.com

Smith & Nephew Operations Sdn Bhd
www.smith-nephew.com

COMPANY NAME & ADDRESS
Smith & Nephew Operations Sdn Bhd
Plot P332, Persiaran Cassia Selatan 8
Taman Perindustrian Batu Kawan,
Mukim 13
14100 Penang, Malaysia

Tel: (04) 2023111
Fax (04) 2023111
Website www.smith-nephew.com

Parent Company: United Kingdom
Membership: Associate

Sontara South Asia Sdn Bhd
www.sontara.com

PRODUCT
Nonwoven products for medical use

COMPANY NAME & ADDRESS
Level 15-1, 1 First Avenue 2A, Dataran Bandar Utama Damansara,
47800 Petaling Jaya, Selangor.

Tel: +603 7651 7396
Fax: +603 7651 7701

Parent company: USA
Membership: Associate

Tako Astatic Technology Sdn Bhd
www.takohealthcare.com.my

Range : Roll stocks / Pouches / Lids / Bags (Plain & Printed)

Material: Tyvek® (Uncoated & Coated), Medical Paper (Uncoated & Coated), Cleanroom Linear Tear Bags, Performance films (Peelable film, thermoforming film), Sterilization Indicator Printing, MG Paper, ESD Packaging

COMPANY NAME & ADDRESS

Tako Astatic Technology Sdn Bhd

Plant 1: No. 15 Jalan Kesuma 2/2, Bandar Tasik Kesuma, 43700 Beranang, Selangor, Malaysia.

Plant 2: No. 11 Jalan Kesuma 2/2, Bandar Tasik Kesuma, 43700 Beranang, Selangor, Malaysia.

Tel: (603) 87238843
Fax: (603) 87238844

Parent company: Malaysia
Membership: Associate

Tip Corporation Sdn Bhd
www.tipcorp.com

PRODUCT
Types of Products Manufactured: Cleanroom Bags, Medical Pouches, Sterilization Pouches, Easypeel Pouches, EasyTear Pouches, Tyvek
Pouches

COMPANY NAME & ADDRESS
Lot 2288, Jalan P4/8, Bandar Teknologi Kajang
Semenyih, Selangor, 43500
Malaysia

Telephone : ( 603) 872-37889
Fax : (603) 872-71889

Country of Origin: Malaysia
Membership: Associate

V3 Bio Sdn Bhd
www.v3bio.com

PRODUCT
Wound care and infection control medical devices

COMPANY NAME & ADDRESS
V3 Bio Sdn Bhd
No 18, Jalan Cassia Selatan 3/1,
Taman Perindustrian Batu Kawan
Bandar Cassia
14100 Pulau Pinang
Malaysia

Telephone: (604) 5886993
Fax: (604) 5886993

Country of Origin: Malaysia
Membership: Associate

Website www.v3bio.com

Varian Medical Systems Malaysia Sdn Bhd
www.varian.com

PRODUCT
Manufacturer of medical devices and software for treating cancer and other medical conditions with radiotherapy, radiosurgery, proton therapy, and brachytherapy

COMPANY NAME & ADDRESS
Suite B-15-5, Wisma Pantai, Plaza Pantai No. 5,
Jalan 4/83A, Off Jalan Pantai Baru,
59200 Kuala Lumpur Malaysia.

Tel: +603-2296 7600
Fax: +603-2296 7601

Parent company: USA
Membership: Associate

WP Popups

Add you text in here

Johnson & Johnson Sdn Bhd
(Medical Division)
www.jnj.com

PRODUCT
J&J’s MedTech manufactures a broad range of products used in the orthopedics, surgical care, specialty surgery and cardiovascular care from its manufacturing plants globally.

Ethicon, a leader in advance medical devices division of Johnson & Johnson, is the clear leader within the Advanced Surgical Device segment in Malaysia.

Ethicon leads in surgical devices sub-segments for Sutures, Energy, Staplers and Hemostat.

DePuy Synthes is the market leader in Orthopedics in Malaysia, leads in trauma, joint reconstruction, spine care solution and neurological solutions.

COMPANY NAME & ADDRESS
Level 8, The Pinnacle, Persiaran Lagoon,
Bandar Sunway, 46150, Petaling Jaya,
Selangor, Malaysia.

Tel: 03-7661 4615
Fax: 03-7610 0519

Parent company: USA
Membership: Full

Sanichem Resources Sdn Bhd
www.sanichem.my

PRODUCT
(1) Analytical testing (ETO RESIDUAL) on medical devices,
(2) Microbiology testing (sterility, bioburden, BnFetc) on medical devices
(3) Water quality testing.

COMPANY NAME & ADDRESS
Sanichem Resources Sdn Bhd
N0 7 & 7A, Jalan Timur 6/1A,
Mercato @ Enstek
Bandar Baru Enstek, Negeri Sembilan
71760 Malaysia
Tel: 606- 7947606
Fax: 606-7947607

Country of Origin: Malaysia
Membership: Associate

Dexcom (Malaysia) Sdn Bhd
www.dexcom.com

PRODUCTS
Manufactures, produces and distributes continuous glucose monitoring systems for diabetes management

COMPANY NAME & ADDRESS
Dexcom Malaysia Sdn Bhd
PMT775, Persiaran Cassia Selatan 4,
Simpang Ampat
14100 Penang

Tel: (604) 5631700

Country of Origin: USA
Membership: Associate

JLL Malaysia Sdn Bhd

PRODUCT
Medical device for test and treatment of arrhythmia

COMPANY NAME & ADDRESS
JLL Malaysia Sdn Bhd
PMT 1224 Jaln PSPN 3, Penang Science Park North,
Simpang Ampat, 14100 Penang

Tel: (+604) 518 7777

Country of Origin: Japan
Membership: Full

Andy Lee Kuan Min

AMMI Chairman / Director Government Affairs & Board of J&J Msia

Andy joined Johnson & Johnson in 2015 and leads the Government Affairs & Policy function for J&J’s total enterprise in Malaysia & Singapore.

Andy is a member of the J&J Malaysia’s Country Management Board and actively represent J&J, in lead positions, in various trade associations including in Association of Malaysian Medical Industries; Pharmaceutical Association of Malaysia and American Malaysian Chamber of Commerce.

He has over 19 years of Government & Public Affairs experience in various industry including Medical Device, Pharmaceutical and FMCG businesses, particularly, in the field of industry policy issues management and advocacy strategies in shaping the operating environment. Prior to joining J&J, Andy held various Government & Corporate Affairs positions in numerous multi-national corporations including Sanofi and Merck Sharp & Dohme.

Dato’ Loo Lee Lian

Chief Executive Officer of InvestPenang

Dato’ Loo Lee Lian is the Chief Executive Officer of InvestPenang, the principal investment promotion agency and wholly owned company of the state of Penang. It is the leading point of contact for investment attraction, facilitation and support for foreign and local businesses.

She came into her position in 2010 backed by 25 years of industry background in the various sectors of the manufacturing industry. She is responsible for identifying new areas of growth and strategizing the state’s investment and industrial policies. Underpinned by the state and InvestPenang’s achievements, the sustained performances of the manufacturing and services sectors have elevated Penang’s per capita income and maintained the state’s status as an economic powerhouse of Malaysia.

Dato Loo has led companies in strategic planning, project management, operations, business development, supply chain management, customer strategies, and international business migration. Her invaluable experience has made her a highly sought-after guest speaker at multiple corporate conferences and also community seminars focusing on job diversity, women empowerment and youth education programs.

Dato Loo holds concurrent appointments as a Director in Penang STEM, member of the Selection Committee of the Penang Future Foundation, Penang State Government’s scholarship program for university undergraduate studies, and is the Chairperson of the Penang i4.0 Seed Fund Evaluation Committee.

Born and bred in Penang, Dato Loo graduated with Bachelor of Economics from the University of Adelaide, South Australia, and received her MBA from the University of South Australia.

YAB Tuan Chow Kon Yeow
Chief Minister of Penang

YAB Tuan Chow Kon Yeow is Penang’s fifth Chief Minister. He assumed the State’s top leadership role after Pakatan Harapan’s thumping victory in Malaysia’s 14th General Elections in May 2018. He has also been a Penang State Executive Councilor since 2008.

He has been the DAP Penang State Chairman since 2000 and DAP National Vice-Chairman since 2004.

In a recent interview after his swearing-in, the fifth Chief Minister of Penang reiterated his administration’s commitment to ensure delivery of three mega projects, namely the Penang Transport Master Plan, flood mitigation and affordable housing. Undaunted by the higher expectations, he takes this as a challenge to serve Penangites and find ways to make this state, a better home for all.

Besides that, YAB Tuan Chow also aims to transform Penang into ‘A Family-Focused Green and Smart State that Inspires the Nation’ with the Penang2030 Vision and this is the current focus of the State Government.

Mr Samuel Pooranakaran

Vice-President – Manufacturing, Malaysia

Samuel has over 25 years of experience in consumer electronic, implantable medical device manufacturing & logistics operations. Graduating from RMIT University, Australia, Samuel joined Seagate Singapore in 1994 and took up various roles across South East Asia.

In 2007, Samuel moved to Sydney and joined Cochlear. Here, he continued embracing opportunities and new challenges culminating in his final Sydney-based role as the Head of Manufacturing Engineering.

Subsequently, in 2016 Samuel moved to Malaysia to build the manufacturing & global logistics facility from scratch to support Cochlear’s growing global demand. Currently, he is responsible for manufacturing & logistics operations as a Vice President of Malaysian operations.

Mr Amirul Haqiem

Product Marketing Manager, Asia-Pacific
Oliver Healthcare Packaging

Amirul leads the product commercialization across the Asia-Pacific region at Oliver Healthcare Packaging. Into his sixth year with Oliver, Amirul brings a strong foundation in medical packaging, having started in technical services and played a key role in establishing Oliver’s R&D Technical Center in Singapore.

His experience includes medical packaging design and conceptualization, R&D, material testing, and troubleshooting. In his current role, Amirul manages the regional product portfolio, aligning global offerings with Asia-Pacific market needs. He works cross-functionally to drive product education, strategic planning, and sustainability initiatives, guided by market insights and competitive analysis.

He holds a BSc (Hons) in Biomedical Engineering from the Singapore University of Social Sciences

Mr HT Eow

Managing Director, Abbott Penang

Mr HT Eow has been the Managing Director for Abbott Penang (St Jude Medical Operations Sdn Bhd) since July 2015. Prior to that, he spent 6 years with B.Braun Medical Industries Sdn Bhd as Vice-President (2012–2015) and General Manager (2009 -2012) for Medical Plant. Mr Eow was also attached to Intel Tech Sdn Bhd for 16 years before moving to the medical device industry.

Mr Eow holds a Bachelor of Science in Industrial Engineering from Universiti Teknologi Malaysia.

ASTRONDX TECHNOLOGIES SDN BHD (Formerly known as ADT Biotech Sdn.Bhd.)
https://adt-biotech.com/

PRODUCTS
In Vitro Diagnostic Devices

COMPANY NAME & ADDRESS
ADT Biotech Sdn Bhd
307, Block B, Phileo Damansara 1, 9 Jalan 16/11,
Petaling Jaya, Selangor, Malaysia., 46350

Tel: (03) 793-16760

Country of Origin: Malaysia
Membership: Associate

Opulent Solutions Sdn Bhd
www.opulent-group.com

PRODUCTS
1) Printed circuit board assembly (PCBA) for Endoscopy
2) Printed circuit board assembly (PCBA) of Blue Light Therapy for Psoriasis
3) Printed circuit board assembly (PCBA) of medical devices for the treatment of sleep apnea and other
respiratory conditions
4) Full box build integration assembly for hair growth product

SERVICES
EMS services provider. Provide vertical integration services from PCB to PCBA and till full box build integration assembly

COMPANY NAME & ADDRESS
Opulent Solutions Sdn Bhd
Plot III Bayan Lepas Industrial Park,
Lebuh Raya Kampung Jawa
Bayan Lepas, Pulau Pinang, 11900

Tel: (604) 640-8698

Country of Origin: Singapore
Membership: Full

Puncak Bumi Utama Sdn Bhd
www.pbumed.com

PRODUCTS
Patient isolation transporter, medical healthcare beds, medical peripheral and accessories

COMPANY NAME & ADDRESS
Puncak Bumi Utama Sdn Bhd
S-3, S-4, S-10 & KIM 2 Lorong Kendi 1,
Jalan Kendi, Kawasan Industri MARA,
14100 Simpang Ampat,
Seberang Perai Selatan, Pulau Pinang, Malaysia.

Tel: (604) 640-8698

Country of Origin: Malaysia
Membership: Associate

Oliver™ Healthcare Packaging Malaysia Sdn. Bhd.
www.oliverhcp.com

PRODUCTS
Sterile-grade die-cut lid, roll stock, HDPE card, and pouch products for the medical device and pharmaceutical markets.

COMPANY NAME & ADDRESS

Oliver™ Healthcare Packaging Malaysia Sdn. Bhd.

No. 15, Jalan Persiaran Bioteknologi,
Kawasan Perindustrian SILC,
79200 Iskandar Puteri, Johor,
Malaysia

Tel: +65 6232 4001

Country of Origin: USA
Membership: Associate

Menicon Malaysia Sdn Bhd
www.menicon.my

PRODUCTS
Contact Lens

COMPANY NAME & ADDRESS
Menicon Malaysia Sdn Bhd
No.2, Jalan Hi-Tech 16, Zon Industri Fasa 4,
Kulim Hi-Tech Park,
Kulim, 09090 Kedah

Tel: (04) 4089545

Country of Origin: Japan
Membership: Full

KHTP Sterilisation Services Sdn Bhd
www.khtp.com.my

SERVICES
Provision of ethylene oxide sterilization services involving the process of sterilization of medical device

COMPANY NAME & ADDRESS

KHTP Sterilisation Services Sdn Bhd
Lot 33, Jalan Hi-tech 4,
Kulim Hi-Tech Park,
Kulim, 09090 Kedah

Tel: 04-403 2131

Country of Origin: Malaysia
Membership: Associate

AFA Pac Sdn Bhd
www.afa-tech.com

PRODUCTS
1. Customized End of Line Packaging Automation
2. Assembly Machine for Medical Devices
3. Thermoform Packing Machine

COMPANY NAME & ADDRESS
AFA Pac Sdn Bhd
No. 3, Jalan TTC 7,
Taman Teknologi Cheng,
Kawasan Perindustrian Cheng,
75250 Melaka,
Malaysia.

Tel: (06) 3363518

Country of Origin: Malaysia
Membership: Associate

Knowles Electronics (M) Sdn Bhd
www.knowles.com

PRODUCTS
Types of Products Manufactured

Stamped Components for Hearing Aids and Communication Parts
Miniature Dampers and Transducers, Microphones and Value Added Products for Hearing
Aids and Communication
Miniature Microphones for Hearing Aids and Communication
Global Distribution Center of Product

COMPANY NAME & ADDRESS
Knowles Electronics (M) Sdn Bhd
Plot 104, Lebuhraya Kampung Jawa
Bayan Lepas Industrial Estate
Bayan Lepas
11900 Penang

Tel: 604-6147466

Country of Origin: Malaysia
Membership: Associate

Ms Ong Yee Ting

Communications Specialist | ESG Pillar Lead, Boston Scientific Penang

Yee Ting is a seasoned communications specialist with over a decade of experience in corporate communications. Known for her passion in CSR, she now leads the ESG pillar at Boston Scientific in Penang, where she plays a key role in coordinating cross-functional efforts to drive ESG initiatives. Her work focuses on using ESG as an engagement platform to bring teams together and create meaningful impact through sustainability initiatives.

.

Mr Thierry Wagner

Global Director Regulatory & Standards, DuPont Tyvek Healthcare Packaging
DuPont Water & Protection

Thierry Wagner has spent over 37 years working for DuPont and currently as Global Director, Regulatory & Standards – DuPont Healthcare Packaging located in Luxembourg. He is convenor of ISO/TC 198/WG7 “Sterilization of Health Care Products—Packaging” and of CEN/ TC 102/WG4 “Sterilizers and associated equipment for processing of medical devices – Packaging”, past chairman of the Sterile Barrier Association (SBA), currently SBA director and regulatory committee chair.

Thierry is also a member of the CEN-CENELEC Healthcare Sector Forum and actively engaged in the IHI ENKORE Eco Healthcare Project with the objective to drive the future of sustainability in healthcare.

Thierry published 2 book chapters on healthcare packaging and is a regular speaker at evenst and conferences on medical and pharmaceutical packaging.

Ms Marinela Cebic

VP Global Regulatory Affairs & Quality Assurance

With a passion for developing solutions-focussed teams, Marinela is responsible for leading quality and regulatory excellence for SteriPack and advancing our corresponding compliance strategies. She’s also the chair of our Environmental and Social Governance steering committee.

Marinela has 2 Master’s Degrees – one in Law, and another in Healthcare Administration. She has previously held director positions at Synergy Health and Steris.

Dr Brian McEvoy

Chief Technology Officer
STERIS Applied Sterilization Technologies

Dr. Brian McEvoy is Chief Technology Officer at STERIS AST with responsibilities for technology leadership, strategy development & deployment, across sterilization technology platforms, both gaseous (Ethylene Oxide and Vaporized Hydrogen Peroxide) and radiation (Electron Beam, Gamma and Xray radiation). With over twenty years in the healthcare sterilization industry, and core competences in sterilization technology and sterility assurance, Brian’s current technical role involves supporting STERIS AST and its Customers with the supply of sterile medical devices to critical healthcare applications.

Brian has a passion for educational and personal development with a PhD in Microbiology and an MBA and numerous publications in the field of sterilization. A recognized industry expert and a national expert on CEN and ISO standards committees and is the inaugural recipient of the AAMI 2024 Sterilization Science Award. Co-chair of
Kilmer Modalities Collaboration group. Program Committee Member of Kilmer* Conference 2016, 2019, 2022 and 2025 and Program Chair for the International Meeting on Radiation Processing 2024.

Siliconpro Lab Sdn Bhd

www.siliconprolab.com

PRODUCTS
Manufacturer of silicone and plastic products

Services

Assisted Tooling Design & Mould-making
Precision Moulding
Secondary & Assembly Process
Cleanroom environment

COMPANY NAME & ADDRESS
Lot. 1910, Jalan Kawasan Perindustrian Balakong 7
Kawasan Perindustrian Kg Baru Balakong
Seri Kembangan
43300, Selangor

Tel: (03) 89626252

Country of Origin: Malaysia
Membership: Associate

MY CO2 (PG) SDN BHD

www.myco2.com.my

SERVICES
1. Laboratory testing
a. Cleanliness test
-Polar Extractable Inorganics
-Non – Polar Organics : Total Hydrocarbon
-Total organic carbon
-Residual acid
-Particulate residue

b. Microbiological test
Bioburden, Endotoxin, Sterility testing, In vitro cytotoxicity

c. Water testing using ICP-OES & ICP-MS

2. Environmental monitoring & DOSH assessment

3. ESG Reporting

COMPANY NAME & ADDRESS
16, Lengkok Kikik 1
Taman Inderawasih, Prai
13600 Penang

Tel: (04) 380 8282

Country of Origin: Malaysia
Membership: Associate

KHTP BIO-ANALYTICAL LABORATORY SDN BHD

SERVICES
Ethylene Oxide Residual (EO) testing in medical devices

KBio also provides a wide range of microbiology-related medical device testing to help you validate your sterilization process in accordance with national and international standards. Test applicable:
1- Bioburden
2- Bacteriostasis and Fungistasis Test (B/F)
3- Product Sterility
4- Biological Indicator

COMPANY NAME & ADDRESS
Ground Floor, KTechno Centre
Kulim Hi Tech Park
09090 Kulim Kedah

Tel: 604-6147466

Country of Origin: Malaysia
Membership: Associate

SCHNEIDER ELECTRIC INDUSTRIES (M) SDN BHD

SERVICES
Plant digitalization services, sustainability consulting services

Plant energy management services

COMPANY NAME & ADDRESS

Level 19, Tower B, Plaza 33
No 1 Jalan Kemajuan, Seksyen 13
Petaling Jaya 46200 Selangor

Country of Origin: USA
Membership: Associate

GRAND TEN HOLDINGS SDN BHD

SERVICES
Medical Device Sterilization using Gamma Technology

COMPANY NAME & ADDRESS

Grand Ten Holdings Sdn Bhd
Plot PT5754, Jalan 2, Kawasan Perusahaan Bandar Baru Salak Tinggi, Sepang, 43900 Selangor, Malaysia
Tel: 603-8705 5995

Country of Origin: Malaysia
Membership: Full

DKSH MALAYSIA SDN BHD

SERVICES
Distribution of Medical Devices

COMPANY NAME & ADDRESS

DKSH Malaysia Sdn Bhd
B-11-01, The Ascent, Paradigm,
No.1, Jalan SS7/26A, Kelana Jaya,
47301 Petaling Jaya, Selangor Darul Ehsan

Country of Origin: Malaysia
Membership: Associate

EUREMED SDN BHD

Products manufactured
Single to Multi-Lumens and Single to Multi Layer medical tubing.

COMPANY NAME & ADDRESS
Euremed Sdn Bhd
125, Jalan Ekoperniagaan 4, Eco Business Park II,
Senai, 81400 Johor

Country of Origin: Malaysia
Membership: Associate

INSULET MALAYSIA SDN BHD

Products manufactured
General active medical devices, namely Omnipod 5 Automated Insulin Delivery System.

COMPANY NAME & ADDRESS
Insulet Malaysia Sdn Bhd
No 5 Jalan Persiaran Bioteknologi
Kawasan Perindustrian SILC
Iskandar Puteri, 79200 Johor

Country of Origin: USA
Membership: Associate

SMOOTHBOR PLASTICS MALAYSIA SDN BHD

Products manufactured
Medical Tubes

COMPANY NAME & ADDRESS
Smoothbor Plastics (Malaysia) Sdn Bhd
No 8, Jalan I-Park SAC 2,
Taman Perindustrian I-Park SAC,
Senai, 81400 Johor

Country of Origin: USA
Membership: Full

SPECTRUM (KELPAC MEDICAL SDN BHD)

Products manufactured
Medical Tubes

COMPANY NAME & ADDRESS
Kelpac Medical Sdn Bhd
No. 10, Jalan Laman Setia 7/3,
Setia Business Park
Gelang Patah, 81550 Johor

Country of Origin: USA
Membership: Full

www.spectrumplastics.com

ROCHE DIAGNOSTICS MALAYSIA SDN BHD

Products manufactured
In vitro (IVDs)

COMPANY NAME & ADDRESS
Roche Diagnostics Malaysia Sdn Bhd
B-20-1, Level 20, The Ascent,
Paradigm, No. 1, Jalan SS7/26A
Petaling Jaya
47301 Selangor

Country of Origin: Switzerland
Membership: Full

https://www.roche.com.my/

LGI TECHNOLOGY PENANG SDN BHD

Products manufactured
Labels and fabrications, die-cut polymer film and foam products

COMPANY NAME & ADDRESS
LGI Technology Penang Sdn Bhd
No 6, 8 & 10, Lorong Mak Mandin 5/8
Kawasan Perindustrian Mak Mandin
Butterworth, 13400 Penang

Country of Origin: USA
Membership: Associate

www.cleanmarklabels.com

LANCO INTEGRATED (MALAYSIA) SDN BHD

Products manufactured
Custom made automated machine

COMPANY NAME & ADDRESS
Lanco Integrated (M) Sdn Bhd
PT 5887, Jalan Cassia Selatan 3/8
Taman Perindustrian Batu Kawan
Simpang Ampat
14100 Penang

Country of Origin: USA
Membership: Associate

https://lancointegrated.com/

MUN GLOBAL SDN BHD

Products
Premium healthcare and personal protective products

COMPANY NAME & ADDRESS
Mun Global Sdn Bhd
Lot 26, Jalan Perusahaan 1, Amari Business Park,
Kawasan Perindustrian Batu Caves,
Batu Caves, Selangor, 68100

Tel: (03) 617-76488

Country of Origin: Malaysia

Membership: Associate

https://munglobal.com/

HARLEIGH (MALAYSIA) SDN BHD

Products
Vision Care Packaging
Medical Device Packaging

COMPANY NAME & ADDRESS
Harleigh (Malaysia) Sdn Bhd
No. 4 Jalan Tahana
Tampoi Industrial Estate
Johor Bahru
80350 Johor

Tel: (07) 2361263

Country of Origin: Malaysia

Membership: Associate

www.shin-nippon.com.my

Mr Frederic Rebetez

Managing Director and Site Leader, Smith & Nephew

Frederic Rebetez is the Managing Director & Site Leader for Smith & Nephew’s new greenfield manufacturing site in Penang, Malaysia. Fred oversees all Malaysian operations from manufacturing and distribution of Orthopedics products around the globe.
He is an expert in driving Operational Excellence and pioneering initiatives like the greenfield projects, significant enhancements to Quality Management Systems, and the successful registration of new sites for prominent certifications such as ISO 13485 & MDSAP.

He also has experience ranging from reshaping Quality Management Systems, successfully navigating FDA inspections, championing new product introductions to integrating Lean Manufacturing and Six Sigma methodologies for optimized operations.
His academic pursuits are complemented by an EMBA in Management of Technology from EPFL Lausanne, certifications in Lean Manufacturing and Six Sigma from Johnson & Johnson, and a Master’s Degree in electronics engineering.

He is also recognized for his leadership dynamism, analytical acumen, and an unwavering commitment to enhancing product safety and operational excellence. He has strong partnerships, managing cross-functional teams, and his leadership ethos is rooted in fostering engagement and continuous improvement.

Fred relocated from Switzerland to Penang with his wife, Amanda.

Ms Tan Lin Im

Senior APAC Regional HR Director

Tan Lin Im is the APAC Senior HR Director at Teleflex Medical, bringing 28 years of HR professional experience, including 21 years in the electronics industry before transitioning into the medical sector.

A certified ICF coach, she is passionate about people and organizational development, and also serves as the Talent Development Subteam Co-Lead under the Association of Malaysian Medical Industries (AMMI) and Committee member in MyMahir Council for the Medical Industry under TalentCorp.

Mr. Christian Kapischke

AMMI Director/ Senior Vice President, Operations & Head of Centre of Excellence IV Access, B. Braun Medical Industries

Christian joins B. Braun Medical Industries in Malaysia with over 22 years of experience serving the Group in Germany, starting at the Avitum division. He then moved up through various local and global functions across the company, which included global strategic Portfolio Management, Marketing, OPEX, Production Management, Controlling, Investment and Projects.

Prior to this role, he was leading a subsidiary of B. Braun as Managing Director, where he was responsible for the overall management of the site. There, he developed a production and plant strategy through 2030.

Christian graduated from the University of Applied Sciences, Ansbach, Germany in Industrial Engineering with focus on Medical Technologies

Mr Ong Chee Kean

APAC Head of Supplier Quality, Dexcom

Ong Chee Kean is APAC Head of Supplier Quality at Dexcom Malaysia and with the company for 4 years since start up.

Having over 20 years of experience in various quality functions and different industries like electronics contract manufacturers and medical devices industries

Dr Ng Tian Wei

Regional Research & Development Manager
Amcor Flexibles Asia Pacific

Dr. Ng TianWei is a seasoned professional with over two decades of
experience in the flexible packaging industry. He holds both a Bachelor’s degree in Chemical Engineering and a PhD in Mechanical Engineering from Michigan Technological University, USA. His extensive career has been marked by significant contributions to research and development for Amcor Flexibles Asia Pacific.

As a Regional R&D Manager of Amcor Flexibles Asia Pacific, Dr. Ng has played a pivotal role in driving projects focused on healthcare and sustainability, reflecting his commitment to innovation and excellence in the industry.

Mr Leon Yang

Scheme Manager & Technical Specialist, Global Orthopaedic & Dental Technical Team, BSI

eon graduated from the Graduate Institute of Dental Science (Master), Taipei Medical University, and the Department of Biomedical Engineering (Bachelor), Chung Yuan Christian University. He is currently a doctoral candidate (Ph.D. candidate) at the School of Dentistry, Taipei Medical University.

With a background in biomedical engineering and biomaterials, Leon began his career working with a medical device manufacturer as a Senior R&D Engineer. He was mainly responsible for new product design and development, as well as project management—especially in areas such as product design, testing, verification, gamma-ray sterilization validation, clinical evaluation, and clinical follow-up. After four years, he was promoted to Document Control and QA Department Supervisor, in charge of Quality Management Systems (ISO 9001:2008), Medical Device Management Systems (ISO 13485:2003), and all design control documentation. He also served as the Risk Management Team Leader, Internal Audit Team Leader, Clinical Evaluation Team Member, Clinical Follow-Up Team Member, and Internal Trainer. At the same time, Leon was also a lecturer and trainer for several industry training centers.

Leon has been with BSI for over ten years. His current role is Scheme Manager and Technical Specialist of the BSI Global Orthopedic and Dental Devices Team, responsible for generating and maintaining the schemes related to medical device CE certification to ensure compliance with regulatory requirements from the Notified Body and supporting operations with local teams.

Leon’s responsibilities at BSI also include serving as a Technical Specialist for technical file reviews. He has also been the contact point for manufacturers, handling inquiries and certification arrangements with his strong knowledge and excellent communication skills.

Mr. Graham Rice

Vice-President Sustainability,
B. Braun Medical Industries

Graham has made Malaysia his home for over 27 years. Born in the Middle East and raised in the UK, he brings a diverse background to his professional journey.

With extensive experience in procurement and sustainability roles across the Asia Pacific region, Graham has worked in various sectors, including Electrical & Electronics, Consultancy, and Pharmaceuticals, before venturing into Medical Technology.

Graham joined B. Braun in 2015 as Vice President and Head of Procurement for the Asia Pacific region. In addition to this role, he has been instrumental in advancing sustainability initiatives within the company.

In 2024, Graham transitioned to a newly established position as Vice President of Sustainability for B. Braun in Asia Pacific. In this role, he is dedicated to implementing sustainability strategies, policies, and programs that reflect B. Braun’s commitment to social responsibility and environmental sustainability throughout the region.

Ms Ong Yean Ting

Head, Quality and Regulatory, Roche Diagnostics Malaysia

Yean Ting, Heads the Quality Regulatory Access and Policy team in Roche Diagnostics Malaysia. An experienced regulatory and quality professional, Yean Ting has worked across multiple segments of the healthcare industry including pharmaceutical, medical device and In-Vitro Diagnostic sector in leadership roles. Ash a professional with a progressive outlook, she has built and executed strategies to ensure regulatory and quality compliance in the organizations.

Yean Ting takes pride in being a strong industry advocate, leading the Malaysian Medical Device Association (MMDA) as Secretary to the association and representing Malaysia’s medical device stakeholders as Malaysia Representative in GHWP and holding leadership position as Co-Chair of WG5 focusing on Clinical Evidence.

She brings the industry players together to offer Malaysia’ on the industry’s latest developments and create a platform to bridge ideas and feedback between the government and the private sectors.

Yean Ting promotes, develop and establish positive culture within organizations and passionate in driving technical and profession expertise in the Medical Device industry, keeping pace with the ever-changing industry landscape.

Mr Stephen Yeadon

VP, Global Sterilization & Sterility Assurance, Boston Scientific

Steve leads the Boston Scientific Global Sterilization and Sterility Assurance Team and serves as a strategic leader within the global supply chain organization, overseeing all aspects of sterilization processes, sterility assurance programs, and contract sterilization globally.

Steve has a broad background with more than 40 years of experience in microbiology, R&D, engineering, sterilization and quality. Prior to joining Boston Scientific, he held roles with Johnson & Johnson, Alcon and Acelity leading global operations engineering and sterility assurance functions.

Steve started his career with Boston Scientific at Marlborough corporate office, as VP Quality Assurance Global Services. Prior to joining global supply in his current position, he held a divisional role as VP, Quality Peripheral Intervention and Global Sterility Assurance.

Dr James Govindasamy

Vice President, Manufacturing Plant Management of Alcon Johor Sdn. Bhd. (also known as CIBA Vision Johor Sdn. Bhd.). The plant is based at Port of Tanjung Pelepas (PTP), Johor, Malaysia.

Dr. James has held this position since August 2016, leading operations for the manufacturing of renown Air Optix ® sterile contact lenses for refractive error correction and as bandage lenses for the global market. He also is a

Member of the Institution of Engineering and Technology (MIET)
Adjunct Professor at Universiti Teknologi Malaysia (UTM)
Industrial Panelist for the German Malaysia Institute, University of Applied Science

Leadership and Achievements

Under Dr. James’s leadership, Alcon Johor has achieved multiple recognitions, including:

Named “Best Place to Work in Malaysia” for two consecutive years (2021 & 2022)
Winner of “CEO Champion” & “Overall Best Organisation (International Company)” and “Outstanding Practice for HR Digitalisation” at the Life at Work Awards 2023 by TalentCorp
The Grand Award Winner (Overall) of the 24th MIHRM Malaysia-International HR Awards 2024
AKI Industry4FWRD Award 2024 for our digitalization efforts

Dr. James leads multiple corporate social responsibility (CSR) initiatives through the Alcon in Action (AiA) platform, including:

Contributions to underserved communities
Free vision screening events in conjunction with World Sight Day
Home refurbishment projects

Dr. James Jayadeva Govindasamy is known as a visionary leader who champions employee welfare, environmental sustainability, and community development. He has successfully positioned Alcon Johor as a benchmark of excellence in Malaysia’s medical device manufacturing industry.

Dr Muralitharan Paramasua

Chief Executive

Dr. Muralitharan Paramasua, is the Chief Executive of Medical Device Authority, Ministry of Health Malaysia since 15th February 2023. Before being appointed as Chief Executive in February 2023, Dr. Muralitharan served in Ministry of Health Malaysia as an Administrative and Diplomatic Officer in various positions for 9 years.

Prior to joining MOH, Dr. Muralitharan was also once served at the Ministry of Natural Resources and Environment for 7 years from 2011 to 2017 and was responsible for international affairs of the ministry including free trade negotiations with different countries. Dr. Muralitharan earned his PhD in International Economy from University of Malaya. He received his Master’s Degree in Criminal Justice, and his Bachelor’s Degree in Biohealth Science from the University of Malaya.

Mr Baskaran Balasubramaniam

Head of Manufacturing APAC, Teleflex Medical

Mr Baskaran is employed, since 2019, by Teleflex Medical Sdn Bhd (wholly owned by Teleflex Incorporated, headquartered in Wayne Pennsylvania, US) and currently holds the position as Head of Manufacturing for APAC Region. He is a member of the Board of Directors in Teleflex Medical Sdn Bhd. He oversees the Manufacturing Operations of all the 4 Teleflex Manufacturing Sites in Malaysia & India with over 4000+ employees.

He has over 33 years of Operations experience in various industry including Electronics, FMCG, & Medical Device, particularly, in the field of manufacturing, engineering, environment, safety, health, security, sustainability and quality having held various positions shaping the operating environment. Prior to joining Teleflex, Mr Baskaran held various operations positions in numerous multi-national corporations including Texas Instruments and SC Johnson.