Thirteen participants attended the AMMI Industry Expert Training on Effective Complaint Handling held at G Hotel Penang. Trainer Frank Ried provided participants with an overview about handling of Medical Device Complaints, from receiving complaints, registration, classification, investigation, initiating and following up of corrective actions until reporting and closing of a complaint.
Abbott (St. Jude Medical Operations (Malaysia) Sdn. Bhd)
https://www.my.abbott/
PRODUCT
Cardiology, cardiovascular and neurology products and components.
COMPANY NAME & ADDRESS
St Jude Medical is now Abbott
Plot 102, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Industrial Zone,
Penang, Malaysia
Tel: 04-810 1000
Fax: 04-810 1001
Parent company: USA
Membership: Full
PRODUCT
Single-use Flexible Endoscopes and reusable Endoscope Monitor, Cardiology and Neurology Needle and Electrodes
COMPANY NAME & ADDRESS
Lot 69B Lintang Bayan Lepas 6 Phase IV,
11900 Penang, Malaysia
Tel: 04-252 9000
Fax: 04-644 8932
Parent company: Denmark
Membership: Full
PRODUCT
Household, examination and surgical gloves.
COMPANY NAME & ADDRESS
Prima 6, Prima Avenue, Block 3512,
Jalan Teknokrat 6, 63000
Cyberjaya, Malaysia.
Tel: 03-8310 6688
Fax: 03-8318 6699
Parent company: Australia
PRODUCT
Medical packaging materials
COMPANY NAME & ADDRESS
Lot 823, Jalan Subang 5, Taman Perindustrian Subang USJ 1,
47600 Subang Jaya, Selangor, Malaysia.
Tel: 03- 8021 0998 (General Line)
Fax: 03- 8021 0000
Parent company: USA
Membership: Full
PRODUCT
Product Manufacturing: Haemodialysis and Irrigation solution.
COMPANY NAME & ADDRESS
Jalan 6/44, Kawasan Perindustrian Pengkalan Chepa 2,
Kota Bharu 16100, Kelantan.
Tel : +609 7743 388
Fax : +609 7742 205
Parent company: Malaysia
Membership: Full
PRODUCT
In-vitro diagnostic including rapid test kits for fertility, drugs of abuse and infectious diseases.
COMPANY NAME & ADDRESS
17, Lorong Nagasari 2, Taman Nagasari,
13600, Perai Penang, Malaysia
Tel: 604-3901168
Fax: 604-3831334
Parent company: Malaysia
Membership: Full
PRODUCT
Suction connecting tubes, oxygen tubes, insufflator filter with extension tube, syringe extension tubing, laparoscopic suction irrigation tubes with probes, pill cups, measuring cups, gallipots, kidney dishes etc
COMPANY NAME & ADDRESS
28-32 Jalan Teluk Batu 36/2, Batu 4 1/2,
Jalan Kebun, Seksyen 36, 40470 Shah Alam,
Selangor, Malaysia.
Tel: 03-5162 2618
Fax: 03-5162 2619
Parent company: Australia
Membership: Full
PRODUCT
Sterilization gas (Ethylene Oxide, mixtures)
COMPANY NAME & ADDRESS
37, Lorong Sungai Puloh 1A/KU6,
Taman Teknologi Gemilang, Kawasan Perindustrian Sungai Puloh,
41050 Klang Selangor.
Tel : 03-3290 2263
Fax : 03-3290 2016
Parent company: USA
Membership: Full
PRODUCT
Medical (Foley Catheter)
COMPANY NAME & ADDRESS
Lot 57C, Lorong Perusahaan 5,
Kulim Industrial Estate, 09000
Kulim, Kedah, Malaysia
Tel: 04 – 4801300
Fax: 04 – 4891737
Parent company: USA
Membership: Full
PRODUCT
Infusion and transfusion sets, sutures, intravenous cannula, large volume parenterals, hemodialysis concentrates, peritoneal dialysis solution, bloodlines, surgical instruments, hypodermic needles, spinal needles, AV fistula epidural anaesthesia sets
COMPANY NAME & ADDRESS
Bayan Lepas Free Industrial Zone, P O Box 880,
10810 Penang, Malaysia
Tel: 04-632 3100
Fax: 04-643 3750
Parent company: Germany
Membership: Full
PRODUCT
OEM
COMPANY NAME & ADDRESS
PMT 741, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan 14100,
Bandar Cassia,Penang, Malaysia
Tel : + 604-5556688
Fax : +604-5556699
Parent company: USA
Membership: Full
Ciba Vision Johor Sdn Bhd
www.alcon.com
PRODUCT
Contact Lens
COMPANY NAME & ADDRESS
Ciba Vision Johor Sdn Bhd
No.1 Jalan DPB/5,
PelabuhanTanjung Pelepas
81560, Gelang Patah, Johor
Malaysia
Tel: (07) 504 3636
Fax: (07) 507 1759
Website: www.alcon.com
Parent Company: Switzerland
Membership: Associate
Cochlear Malaysia Sdn Bhd
www.cochlear.com
PRODUCT
1. Implantable Hearing Systems manufactured in Australia
2. Global Service & Repair of Sound Processors & Baha, Global IT and Procurement Support
COMPANY NAME & ADDRESS
Unit UG1, Upper Ground Floor, Vertical Podium,
Avenue 3, Bangsar South, No.8, Jalan Kerinchi,
59200, Kuala Lumpur, Malaysia.
Tel : +603 2282 3839
Fax : +603 2282 3839
Parent company: Australia
Membership: Full
Diptech Industries Sdn Bhd
www.diptech.com.my
PRODUCT
Single Coated Medical Tapes, Double Coated Medical Tapes, Medical Woven & Non Woven Tapes, Release Liners Hydrocolloids. Leap Pads
COMPANY NAME & ADDRESS
No.11 Jalan Angsana 1/3, Taman Perindustrian Angsana,
08000 Sungai Petani, Kedah
Tel : 604 422 3688
Fax : 604 424 0941
Parent company: Malaysia
Membership: Full
DuPont Malaysia Sdn Bhd
www.dupont.com
PRODUCT
Tyvek
COMPANY NAME & ADDRESS
DuPont Malaysia Sdn Bhd
Level 7, Menara CIMB,
Jalan Stesen Sentral 2, Kuala Lumpur Sentral,
50470 Kuala Lumpur
Tel: 603-285 90700
Fax: 603-285 99079
Parent company: USA
Membership: Full
Epsilon Medical Devices Sdn Bhd
epsilon-group.com
PRODUCT
Medical Devices
COMPANY NAME & ADDRESS
Lot 5271, Jalan Perusahaan 3 Kamunting Industrial Area
34600 Kamunting, Perak
Tel : 05-8913158
Fax : 05-8911266
Parent company: Malaysia
Membership: Full
Engineered Medical Systems Malaysia Sdn Bhd
www.engmedsys.com
PRODUCT
1. CO2 Indicator
2. Heat and Moisture Exchanger/ Filter
COMPANY NAME & ADDRESS
1114 Jalan Perindustrian Bukit Minyak 18,
Penang Science Park, 14100 Simpang Ampat Penang
Tel : +604 504 1252
Fax : +604 504 1253
Parent company: US
Membership: Full
Fresenius Medical Care Production Sdn Bhd
www.freseniusmedicalcare.my
PRODUCT
1. CO2 Indicator
2. Heat and Moisture Exchanger/ Filter
COMPANY NAME & ADDRESS
Lot 34618 PT29466, Bandar Enstek,
Mukim Labu, 71760 Bandar Enstek,
Negeri Sembilan.
Tel: 606-791 5334
Fax: 606-791 5336
Parent company: Germany
Membership: Full
Haemonetics Malaysia Sdn Bhd
www.haemonetics.com
PRODUCT
Product Manufacturing: Disposable Apheresis and Whole Blood Product
COMPANY NAME & ADDRESS
Plot 308, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan,
14100 Simpang Ampat,
Seberang Perai Selatan, Penang.
Tel: 604-643 3897
Parent company: USA
Membership: Full
Hospitech Manufacturing Services Sdn Bhd
hospitech.my
PRODUCT
Surgical tubing, suction catheters, disposable dressing kits/respirators, oxygen mask, nasal cannula, PVC catheters, bandages & gauze, burn sets, thoracic drainage system, mucous extractors, surgical connecting tubes, underwater chest drainage bottles
COMPANY NAME & ADDRESS
Sub Lot, 1 Lot 6536, Batu 6 Jalan Bukit Kemuning,
40460 Shah Alam.
Tel: 03-5122 5199
Fax: 03-5122 5204
Parent company: Malaysia
Membership: Full
Ideal Healthcare Sdn Bhd
www.idealcare.com.my
PRODUCT
1. Manufacture of Disposable Plastic Medical Devices by Injection Moulding, Blow Moulding, Plastic Extrusion with Thermoforming & Assembly of Medical Devices Components.
2. Distributor of sterile / non-sterile Medical Devices for Anaesthesia, Infusion Therapy, Urology, Gastroenterology, Respiratory, Surgery, Haemodialysis, Obstetrics and Gynaecology, Pathology, Wound Care Management & Procedure Sets
COMPANY NAME & ADDRESS
Ideal Healthcare Sdn Bhd
Lot PT 60598
Kawasan Perindustrian LPK Fasa 1
08000 Sungai Petani Kedah
Tel: 04-444 6875
Fax: 04-444 5975
Membership: Full
ITL Asia Pacific Sdn Bhd
www.itl-limited.com
PRODUCT
Medical device manufacturing – plastic injection moulding, OEM assembly & Packaging, OEM assembly of procedure kits and innovative products contract moulding and assembly
COMPANY NAME & ADDRESS
Plot 17B, Lorong Bemban 2, Bemban Industrial
Estate, 31000, Batu Gajah Perak
Tel: 05-3217 586
Fax: 05-3217 498
Parent company: Australia
Membership: Full
KLS Martin Malaysia Sdn Bhd
www.klsmartin.com
PRODUCT
Reusable Surgical Instruments (Forceps,Scissors,Needle Holder etc)
COMPANY NAME & ADDRESS
No.1193, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat, Penang.
Tel : +604 506 2380
Fax : +604 506 2303
Parent company: Germany
Membership: Full
INTEGER (Lake Region Medical Sdn Bhd)
www.integer.net
PRODUCT
Devices for Cardio, Endorscope, Orthor and drug delivery
COMPANY NAME & ADDRESS
No. 91-B, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Penang, Malaysia.
Tel: 04-810 1818
Fax: 04-643 1232
Parent company: USA
Membership: Full
Medipro Manufacturing (Malaysia) Sdn Bhd
www.medipro.com.my
PRODUCT
Surgical, gowns, drapes and packs, Surgical and medical caps and masks
COMPANY NAME & ADDRESS
Lot 15, Lebuh Hisamuddin 3, Kaw. 20,
Bandar Sultan Sulaiman,42000
Port Klang Selangor, Malaysia.
Tel: 03-3176 3446
Fax: 03-3176 4229
Parent company: Japan
Membership: Full
Mediquip Sdn Bhd
www.cardinalhealth.com
PRODUCT
Latex foley catheters Latex dipped catheters
COMPANY NAME & ADDRESS
Padang Lati, Mukim Paya, Jalan Santan,
02450 Beseri, Perlis, Malaysia.
Tel: 04-938 1411
Fax: 04-938 2150
Parent company: USA
Membership: Full
Meditop Corporation (M) Sdn Bhd
www.top-tokyo.co.jp
PRODUCT
Disposable Medical Devices and Pumps
COMPANY NAME & ADDRESS
Lot 3, Persiaran Usahawan,Taman iks, Seksyen 9,
43650 Bandar Baru Bangi, Selangor.
Tel: 03-8924 0999
Fax: 03-8925 8660
Parent company: Japan
Membership: Full
Medical Innovation Ventures Sdn Bhd
www.mediven.com.my
PRODUCT
Manufacture and Distribution of In vitro Diagnostics Kits
COMPANY NAME & ADDRESS
Medical Innnovation Ventures Sdn Bhd
Level 4, Biopharmaceutical Block,
IPHARM, NIBM, MOSTI, Block 5-A, Halaman Bukit Gambir
Gelugor, 11700 Penang
Malaysia
Tel: (+604) 6562824
Fax: (+604) 6562824
Website: www.mediven.com.my
Parent Company: Malaysia
Type of membership: Associate
Molnlycke Health Care Sdn Bhd
PRODUCT
Surgical Gloves and Dental Gloves
COMPANY NAME & ADDRESS
Lot 12A, Jalan Hi-Tech 7, Industrial Zone Phase 2,
Kulim Hi-Tech Park,
09090 Kulim, Kedah
Tel : +604-402 6500
Parent company: Sweden
Membership: Full
Muzamal Industries Sdn Bhd
www.muzamal.com
PRODUCT
Disposable syringe with needle & without needle, specimen container & sutures
COMPANY NAME & ADDRESS
Muzamal Industries Sdn Bhd
Lot 21, Jalan 3A, Kawasan Perindustrian Cheras Jaya 43200
Cheras Selangor
Tel: 603 -90763080
Fax: 603- 90803098
Parent Company :Malaysia
Membership : Associate
Orthomedic Innovations Sdn Bhd
www.orthomedic.com.my
PRODUCT
Orthopaedic Instruments and Implants
COMPANY NAME & ADDRESS
188-D, Jalan Sultan Azlan Shah, Sungai Tiram,
11900 Bayan Lepas, Penang, Malaysia.
Tel: +604 644 5139
Fax: +604 644 9139
Parent company: Malaysia
Membership: Full
Owen Mumford Sdn Bhd
www.owenmumford.com
PRODUCT
1. Packing of Pen Needles
2. Packing of Vaginal Dilators
3. Manufacture of Single-use Sterile Safety Lancets
COMPANY NAME & ADDRESS
No. 21, Jalan Bioteknologi 3 Kawasan Perindustrian SiLC Nusajaya,
79200 Johor
Tel: +607 5539617
Fax: +607 5539617
Parent company: UK
Membership: Full
Paramit.TECAN Malaysia Sdn Bhd
www.paramit.com
PRODUCT
PCBA for genome sequencing machine
COMPANY NAME & ADDRESS
PMT 1199, Penang Science Park,
Lorong Perindustrian Bukit Minyak 21,
14100 Simpang Ampat Seberang Perai Tengah, Penang.
Tel : 604-540 7155
Fax : 604-540 7111
Parent company: Switzerland
Membership: Full
PENTAX Medical (Penang) Sdn Bhd
https://www.pentaxmedical.com/
PRODUCT
OEM Manufacturing- Endoscopic system
SERVICES
Repair of the endoscopy (service for own brand only)
COMPANY NAME & ADDRESS
PENTAX Medical (Penang) Sdn. Bhd.
Plot 12 & 13, Fasa 4
Hilir Sungai Keluang 3
Bayan Lepas, 11900 Penang, Malaysia
Tel: 604 6379800
Parent Company: Japan
Membership: Full
Prent Malaysia Sdn Bhd
prent.com.my
PRODUCT
Custom supplier of precision plastic thermoforming
COMPANY NAME & ADDRESS
PTD102587, Jalan Cyber 14, Senai Ind Park IV,
81400 Senai, Johor, Malaysia.
Tel: 07- 599 7661
Fax: 07-599 7660
Parent company: USA
Membership: Full
Sanmina-SCI Systems (Malaysia) Sdn Bhd
www.sanmina.com
PRODUCT
Electronic manufacturing services of finished medical devices and printed circuit board assemblies.
COMPANY NAME & ADDRESS
Plot 202, Lorong Perusahaan Maju 9 Bukit Tengah Industrial Estate
13600 Perai, Penang.
Tel : +604 508 1228
Fax : +604 508 1233
Parent company: USA
Membership: Full
Sina-Sterilgamma Sdn Bhd
www.sinasterilgamma.com
PRODUCT
Services in Sterilisation Technology
COMPANY NAME & ADDRESS
Sina-Sterilgamma Sdn Bhd
1-1 Jalan Bandar Rawang 11
Pusat Bandar Rawang
48000 Province: Selangor
Malaysia
Tel: (603) 60912055
Fax: (603) 60936872
Parent Company: Malaysia
Membership: Associate
Sin Yong Guan Industries Sdn. Bhd.
www.syg53.com
PRODUCT
Medical PVC Compound and Plastic Tubing for Medical
COMPANY NAME & ADDRESS
8 Solok Rishah 2, Kwsn Perindustrian Silibin 30100 Ipoh, Perak, Malaysia.
Tel: 05-526 7231
Fax: 05-526 8491
Parent company: Malaysia
Membership: Full
SteriPack Contract Manufacturing
www.steripackgroup.com
PRODUCT
Contract manufacturing of medical devices and pharmaceutical products
COMPANY NAME & ADDRESS
PT119992, Jalan Canang Emas 8 Telok Gong,
42000 Klang Selangor, Malaysia
Tel : 03-3167 3596
Fax: 03-3167 3597
Parent company: Ireland
Membership: Full
Straits Orthopaedic Sdn Bhd
www.straitsortho.com.my
PRODUCT
Orthopaedic Devices
COMPANY NAME & ADDRESS
Straits Orthopaedics (Mfg) Sdn Bhd
483, Tingkat Perusahaan 4A
Prai Free Industrial Zone
13600 Prai, Penang
Malaysia
Tel: 604-3831885
Fax: 604-3838178
Parent Company: Malaysia
Membership: Associate
Symmetry Medical Malaysia Sdn Bhd
www.tecomet.com
PRODUCT
Medical sterilizing cases, medical instruments and orthopaedic implants.
COMPANY NAME & ADDRESS
Plot 80C, Kawasan Perusahaan Bayan Lepas,
11900 Bayan Lepas, Penang, Malaysia.
Tel : 04-645 6802
Fax : 04-6445805
Parent company: USA
Membership: Full
Synergy Sterilisation (M) Sdn Bhd
www.steris-ast.com
PRODUCT
Sterilization –Gamma, sterilization –ETO lab service, post process inspections logistics, provision of sterilisation process of medical products.
COMPANY NAME & ADDRESS
Plot 203 Kuala Ketil Industrial Estate,
09300 Kuala Ketil, Kedah, Malaysia.
Tel: 04-415 2111
Fax: 04-415 2121
Parent company: USA
Membership: Full
Teleflex Medical Sdn. Bhd.
www.teleflexmedical.com
PRODUCT
Anaesthesiology, respiratory, urology and home care medical devices.
COMPANY NAME & ADDRESS
Lot No PT2577, Jalan Perusahaan 4 Kamunting,
34600 Kamunting Perak.
Tel : 05-891 5111
Fax : 05-891 2699
Parent company: USA
Membership: Full
Texchem Life Sciences Sdn Bhd
www.texchem-pack.com
PRODUCT
Disposable medical device and key components contract manufacturing.
SERVICES
Contract Manufacturinng and Polymer engineering solution
COMPANY NAME & ADDRESS
Lot 3, Jalan P/6 Kawasan Perindustrian Bangi,
Line 2, Bandar Baru Bangi 43650, Selangor.
Tel: +603-8925 0370
Fax: +603-8925 0317
Parent company: Japan
Membership: Full
Tomoe Malaysia Sdn Bhd
www.tomoeshokai.co.jp
PRODUCT
EO Sterilization Gas for Medical Devices
COMPANY NAME & ADDRESS
Lot 13, Jalan Kulim Hi-Tech 13,
Kulim Hi Tech Park Phase 3,
Kulim, Kedah 09000 Malaysia.
Tel : +604-492 4101
Fax : +604-492 4202
Parent company: Japan
Membership: Associate
Top Glove Sdn Bhd
www.topglove.com
PRODUCT
Latex powdered/ powder-free examination/sterile surgical gloves, nitrile powdered/ powder-free examination gloves, vinyl opowdered/ P-F examination gloves, household flocklined/Unlined gloves, coloured latex P-gloves(blue/green), green mint latex p-gloves, cleanroom gloves
COMPANY NAME & ADDRESS
Lot 4968, Bt 6 Jalan Teratai, Off Jalan Meru 41050 Klang
Tel: 03-3392 1992/1905
Fax: 03-3392 1291/8410
Parent company: Malaysia
Membership: Full
UWHM Sdn Bhd
www.uw-healthcare.com
PRODUCT
Disposable Oxygen Prefilled Humidifier, Disposable Oxygen Prefilled Nebulizer, Digital Oxygen Flow Meter, Digital Oxygen Humidifier Water Level & Humidity Sensor
COMPANY NAME & ADDRESS
UWHM Sdn Bhd
PMT 790, Jalan Cassia Selatan 5/2,
Taman Perindustrian Batu Kawan,
Bandar Cassia, Pulau Pinang,
14110, Malaysia.
Tel: 604-5855229
Fax: 604 – 5899677
Parent company: Malaysia
Membership: Full
BACTIGUARD (South East Asia) Sdn. Bhd
www.bactiguard.com
PRODUCT
Surgical sutures, hernia meshes, wound management products, surgical implants and other surgical disposables.
COMPANY NAME & ADDRESS
BACTIGUARD (South East Asia) Sdn. Bhd, a BACTIGUARD company
(formerly known as VIGILENZ Medical Devices Sdn. Bhd.)
No. 308, Jalan Perindustrian Bukit Minyak 18,
Penang Science Park, 14100 Penang, Malaysia.
Tel: 604-505 4241 / 505 9841
Fax: 604- 505 9367
Parent company: Malaysia
Membership: Full
Worldwide Medivest Sdn Bhd
www.wmsb.com.my
PRODUCT
Wound closure and surgical sutures
COMPANY NAME & ADDRESS
No. 2, Jalan Karyawan 4/KU7, Lorong Sg Puloh,
Taman Kapar Bestari, Kapar 42200, Selangor.
Tel: 603-3291 2625
Fax: 603-3291 2725
Parent company: Malaysia
Membership: Full
Zeito Plastic Components Sdn Bhd
www.zeito.com.my
PRODUCT
Manufacturing for Injection Molding Plastic Components & Assembly for Medical Devices.
COMPANY NAME & ADDRESS
Lot 19-6,Bersatu Industrial Complex, Jalan CJ1/1,
Cheras Jaya 43200 Cheras, Selangor Darul Ehsan, Malaysia.
Tel : 03-9074 9177
Fax : 03-9074 9096
Parent company: Malaysia
Membership: Full
3M Malaysia Sdn Bhd
www.3M.com
PRODUCT
Hot / cold therapy, bandage, wound dressing, Wraps – joint Support, Stethoscopes, casting, ECG Electrodes, Electrosurgical plate, Drape, Surgical Gown, Clipper, Medical Tape (Single Coated Medical Tapes, Double Coated Medical Tapes, Medical Woven & Non Woven Tapes, Release Liners Hydrocolloids), IV Dressing, Biological Indicators & Incubators, sterilizer, Defibrillator pad, Sterilization Packaging and Sealers, Mask, Fluid Warming Devices and Sets, Dental filling materials, Dental Impression material, Dental Composite Restorative, Dental Adhesive System, Dental Chemical Temporization, Dental Equipment.
COMPANY NAME & ADDRESS
Level 8, Block F, Oasis Square No.2, Jalan PJU1A/7A,
Ara Damansara, 47301 Petaling Jaya, Selangor.
Tel : 603-7884 2888
Fax : 603-7884 2902
Parent company: USA
Membership: Associate
Alliance Contract Manufacturing Sdn Bhd
www.acm-holdings.com
PRODUCT
Manufacture of medical devices and equipment
COMPANY NAME & ADDRESS
2006, Jln Jelawat
Seberang Jaya Industry Estate
Prai, 13700 Penang
Telephone : (604) 2912888
Fax : (604) 2912999
Country of Origin: Malaysia
Membership: Associate
Alcon Laboratories (Malaysia) Sdn Bhd
www.alcon.com
PRODUCT
Authorized Representative
Surgical equipment and contact lense care products
COMPANY NAME & ADDRESS
Alcon Laboratories (M) Sdn Bhd
Level 20-1, Tower B, Plaza 33
No.1, Jalan Kemajuan, Seksyen 13
Petaling Jaya
Selangor
46200 Malaysia
Tel : (603) 79481888
Fax (603) 79481888
Parent Company: Switzerland
Membership : Associate
Baxter Healthcare Sdn Bhd
www.baxter.com.my
COMPANY NAME & ADDRESS
B-21-3A, Level 21, The Ascent, Paradigm, No.1,
Jalan SS7/26A, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia.
Tel : 603-7611 6899
Fax : 603-7611 6800
Parent company: USA
Membership: Associate
Becton Dickinson Sdn Bhd
www.bd.com.my
PRODUCT
Diagnosis Instrument for Influenza A & B
COMPANY NAME & ADDRESS
Unit 24, LG 5 (Executive Wing), Hotel Equatorial,
1 Jalan Bukit Jambul, 11900 Bayan Lepas,Penang.
Tel : +604 640 5688
Fax : +604 640 5686
Parent company: USA
Membership: Associate
Biocon Sdn Bhd
www.biocon.com
PRODUCT
Biopharmaceutical manufacturing
COMPANY NAME & ADDRESS
No.1 Jalan Bioteknologi 1, Kawasan Perindustrian SILC,
15 Bandar Puteri, Johor, 79200, Malaysia.
Tel: 607-560 0000
Fax: 607-560 0098
Parent company: India
Membership: Associate
CCB Medical Devices Sdn Bhd
www.ccb-medical.com
PRODUCT
Injection and blow moulded parts made from various polymer, silicon and rubber. Medical tube extrusion, Assembly services.
SERVICES
Contract manufacturing services from R&D, molding
and assembly.
COMPANY NAME & ADDRESS
CCB Medical Devices Sdn Bhd
PMT 1124, Jalan Perindustrian
Bukit Minyak 8
Taman Perindustrian Bukit Minyak
Simpang Ampat, Penang
14100 Malaysia
Tel : 604 5040198
Fax 604 5040908
Parent Company: Germany
Membership : Associate
Gem Impression Sdn Bhd
www.gem-i.net
PRODUCT
COMPANY NAME & ADDRESS
Gem Impression Sdn Bhd
9&11 Lorong Serunai 2
Sungai Bakap
14200 Penang, Malaysia
Parent Company: Malaysia
Membership: Associate
Greatech Integration (M) Sdn Bhd
greatech-group.com
PRODUCT
Manufacturing: Wearable Diabetic Automation
COMPANY NAME & ADDRESS
PLOT 287(A), 287(B) & 287(C)
Lengkok Kampung Jawa Satu, Phase 3
Bayan Lepas Free Industrial Zone
11900 Penang
Telephone: (604) 6463260
Fax: (604) 6463261
Country of Origin: Malaysia
Membership: Associate
Integrated Plastic Kogyo (M) Sdn Bhd
http://www.ipk.com.my
PRODUCT
Single Use Safety Blood Lancet
COMPANY NAME & ADDRESS
Integrated Plastic Kogyo (M) Sdn Bhd
12, Jalan Teras 1,
Taman Industri Teras
Balakong
43300 Selangor, Malaysia
Tel: (03) 8961 6880
Fax : (03) 8961 9880
Website: www.ipk.com.my
Parent Company: Malaysia
Membership: Associate
Isofield Sdn Bhd
www.isofield.com
PRODUCT
Clean and sterile PPE
COMPANY NAME & ADDRESS
Isolfield Sdn Bhd
No. 6 Jalan Gudang 16/9, Seksyen 16
Shah Alam, Selangor, 40200
Malaysia
Telephone (012) 305-6895
Country of Origin: Ireland
Membership: Associate
Website www.isofield.com
Jabil Circuit Sdn Bhd
www.jabil.com
PRODUCT
Finished devices : Flu detector, Patient Bedside Monitor, Endoscope Reprocessor.
High Level Assembly : Thermal Cyclers (PCR), Sterilization.
PCBA : MRI, Ultrasound, Blood Analyzers, Oxygen Monitor, Cytometry and Hematology
COMPANY NAME & ADDRESS
Jabil Circuit Sdn. Bhd.
56 Hilir Sungai Keluang 1
Bayan Lepas Free Trade
Industrial Zone Phase 4
11900 Penang, Malaysia
Tel: (04) 6427975
Fax : (04) 6428001
Website www.jabil.com
Parent Company: United States
Type of membership: Full
Kobayashi Healthcare (Malaysia) Sdn Bhd
info-my@kobyashi.com
PRODUCT
Importer and Authorized Representatives – cooling gel sheets and heat patch
COMPANY NAME & ADDRESS
Kobayashi Healthcare (Malaysia) Sdn Bhd
50-2-2A, Level 2, Wisma UOA Damansara,
50, Jalan Dungun,
Damansara Heights
50490 Kuala Lumpur
Parent Company: Japan
Membership: Associate
Medtronic Malaysia Sdn Bhd
www.medtronic.com
PRODUCT
Medical Electronics Technology
COMPANY NAME & ADDRESS
B-23-1, The Ascent, Paradigm, No 1 Jalan SS7/26A, Kelana Jaya,
Petaling Jaya, Selangor, 47301, Malaysia
Tel : 603 -78838000
Fax : 603 – 78860474/4702
Parent company: USA
Membership: Associate
Nagoya Plastic Industry Sdn Bhd
http://www.nagoyaplastic.com
PRODUCT
Products: HME, Disposable Bronchoscopy etc.
Services Plastic Injection Moulding with Secondary Process
such as spray painting, printing and sub-assembly
COMPANY NAME & ADDRESS
Nagoya Plastic Industry Sdn. Bhd.
Lot 89, 90, 91, 1249, Jalan Aman 2,
Kawasan Perusahaan
Taman Makmur, Sungai Seluang
Lunas
Kedah, 09600 Malaysia
Tel: (+604) 4848434
Fax: (+604) 484461725
Website: www.nagoyaplastic.com
Parent Company: Malaysia
Type of membership: Associate
MIRA Medsource (Malaysia) Sdn Bhd
www.miramedsource.com
PRODUCT
Medical Device Sourcing for export to USA
COMPANY NAME & ADDRESS
35, 1st Floor, Jalan Todak 6,
Pusat Bandar Sunway Perdana,
13700 Seberang Jaya, Penang.
Tel: 604 383 8025
Hp: 6012 428 2311
Fax: 604 383 1845
Parent company: China
Membership: Associate
Parent Company: Malaysia
Type of membership: Associate
Multivac Sdn Bhd
www.multivac.com
PRODUCT
Packaging Machine
COMPANY NAME & ADDRESS
Lot 10-E, Pusat Teknologi Sunsuria, Jalan Teknologi,
Taman Sains Selangor, Kota Damansara,
47810 Petaling Jaya, Selangor Malaysia.
Tel : +603 61519885 / +603 61511885
Fax : +603 6143 6885
Parent company: Germany
Membership: Associate
Parent Company: Malaysia
Type of membership: Associate
Nihon Kohden Malaysia Sdn Bhd
nihonkohden.com.my
PRODUCT
Patient bedside monitors
COMPANY NAME & ADDRESS
Nihon Kohden Malaysia Sdn.Bhd.
Suite 15-13,Level 15, Gtower,
199 Jalan Tun Razak
Kuala Lumpur
50400, Malaysia
Tel: (603) 21610100
Fax: (603) 21612520
Parent Company: Japan
Membership: Associate
Polyplas Sdn Bhd
http://www.polyplassb.com/
PRODUCT
Manufacturing of plastic injection molding components
COMPANY NAME & ADDRESS
Polyplas Sdn Bhd
No 2056, Mukim 14,
Lorong IKS Bukit Minyak 5,
Taman IKS Bukit Minyak,
14000 Bukit Mertajam Penang
Tel: (04) 5070188
Fax: (04) 5078188
Parent Company: Malaysia
Membership: Associate
Prodelcon Sdn Bhd
http://www.psb.com.my
PRODUCT
OEM parts for Medical Devices
Manufactured: Surgical Instruments, demonstration kits; tooling, jigs & fixture for production of contact lenses, modules & parts for lab automation
SERVICES
Simultaneous 3 to 5 axes precision CNC milling, turn & mill operation, waterjet cutting process; design and fabrication of tooling & integrated automation equipment
COMPANY NAME & ADDRESS
Prodelcon Sdn Bhd
78 Lintang Bayan Lepas 7,
Phase IV
Bayan Lepas
11900 Penang, Malaysia
Tel: 604-6438913
Fax: 604- 6438914
Parent Company: Malaysia
Membership: Associate
Professional Tools & Dies Sdn Bhd
www.professional-tools.com
PRODUCT
1. Contract Manufacturing – Assembling of Semi-Finished and Finished Products / Modules.
2. Precision Plastic Injection Molding and Plastic Injection Mold Making (In-House).
3. Precision Sheet Metal Stamping and Sheet Metal Stamping Die-Making (In-House).
COMPANY NAME & ADDRESS
7118,Jalan Mak Mandin, Kawasan Perindusrian Mak Mandin,
13400 Butterworth, Penang, Malaysia.
Tel: 04-332 2335
Fax: 04-331 2337
Parent company: Malaysia
Membership: Associate
PMA Manufacturing Sdn Bhd
PRODUCT
Cleanroom and Non-Cleanroom Labels, Thermal Transfer Ribbons, Tapes, Medical Pre-Saturated Wipes and Disinfectant Sprays.
COMPANY NAME & ADDRESS
No. 11, Lintang Beringin 2, Diamond Valley,
Georgetown Penang 11960 Malaysia.
Tel: 04-626 1518
Fax: 04-626 5253
Parent company: Malaysia
Membership: Associate
Plastik STC Sdn Bhd
www.hlhightech.com
PRODUCT
Plastic injection moulding services.
Plastic injection mould fabrication.
Precision engineering machining parts.
Clean room class 8 plastic moulding.
COMPANY NAME & ADDRESS
No 7 Jalan TSB 9, Taman Industri Sg Buloh,
Sungai Buloh, 47000 Selangor, Malaysia.
Tel: 03-6157 5313
Fax: 03-6157 5318
Parent company: Malaysia
Membership: Associate
Silcotech Industry Sdn Bhd
www.silcotechindustry.com
PRODUCT
Silicone Injection Process
COMPANY NAME & ADDRESS
Silcotech Industry Sdn Bhd
No. A 153, Jalan 3,
Kawasan Perusahaan MIEL, Sungai Lalang Phase V
Sungai Petani
08000 Kedah
Malaysia
Telephone (604) 4419928
Fax (604) 4429928
Country of Origin: Malaysia
Membership: Associate
Website www.silcotechindustry.com
Smith & Nephew Operations Sdn Bhd
www.smith-nephew.com
COMPANY NAME & ADDRESS
Smith & Nephew Operations Sdn Bhd
Plot P332, Persiaran Cassia Selatan 8
Taman Perindustrian Batu Kawan,
Mukim 13
14100 Penang, Malaysia
Tel: (04) 2023111
Fax (04) 2023111
Website www.smith-nephew.com
Parent Company: United Kingdom
Membership: Associate
Sontara South Asia Sdn Bhd
www.sontara.com
PRODUCT
Nonwoven products for medical use
COMPANY NAME & ADDRESS
Level 15-1, 1 First Avenue 2A, Dataran Bandar Utama Damansara,
47800 Petaling Jaya, Selangor.
Tel: +603 7651 7396
Fax: +603 7651 7701
Parent company: USA
Membership: Associate
Tako Technology Sdn Bhd
www.tako.com.my
PRODUCT
1. Easy peel pouches, easy tear pouches, Cleanroom Bags, Indicator pouches, Paper bags Cleanroom, Medical & ESD Products Packaging.
2. Services – We provide consultation for the design of the static-free medical device products & packaging materials.
COMPANY NAME & ADDRESS
15 Jalan Kesuma 2/2, Bandar Tasik Kesuma, Beranang, 43700 Selangor.
Tel: (603) 87238843
Fax: (603) 87238844
Parent company: Malaysia
Membership: Associate
Tip Corporation Sdn Bhd
www.tipcorp.com
PRODUCT
Types of Products Manufactured: Cleanroom Bags, Medical Pouches, Sterilization Pouches, Easypeel Pouches, EasyTear Pouches, Tyvek
Pouches
COMPANY NAME & ADDRESS
Lot 2288, Jalan P4/8, Bandar Teknologi Kajang
Semenyih, Selangor, 43500
Malaysia
Telephone : ( 603) 872-37889
Fax : (603) 872-71889
Country of Origin: Malaysia
Membership: Associate
V3 Bio Sdn Bhd
www.v3bio.com
PRODUCT
Wound care and infection control medical devices
COMPANY NAME & ADDRESS
V3 Bio Sdn Bhd
No 18, Jalan Cassia Selatan 3/1,
Taman Perindustrian Batu Kawan
Bandar Cassia
14100 Pulau Pinang
Malaysia
Telephone: (604) 5886993
Fax: (604) 5886993
Country of Origin: Malaysia
Membership: Associate
Website www.v3bio.com
Varian Medical Systems Malaysia Sdn Bhd
www.varian.com
PRODUCT
Manufacturer of medical devices and software for treating cancer and other medical conditions with radiotherapy, radiosurgery, proton therapy, and brachytherapy
COMPANY NAME & ADDRESS
Suite B-15-5, Wisma Pantai, Plaza Pantai No. 5,
Jalan 4/83A, Off Jalan Pantai Baru,
59200 Kuala Lumpur Malaysia.
Tel: +603-2296 7600
Fax: +603-2296 7601
Parent company: USA
Membership: Associate
Johnson & Johnson Sdn Bhd
(Medical Division)
www.jnj.com
PRODUCT
Sutures, endo surgery, cardiology-intervention, orthopaedic implants, blood glucose monitoring products, sterilisation
COMPANY NAME & ADDRESS
Level 8, The Pinnacle, Persiaran Lagoon,
Bandar Sunway, 46150, Petaling Jaya,
Selangor, Malaysia.
Tel: 03-7661 4615
Fax: 03-7610 0519
Parent company: USA
Membership: Full
Mehow Medical (M) Sdn Bhd
www.mehow.com
PRODUCT
Manufacturing – OED, OEM and parts of medical devices
COMPANY NAME & ADDRESS
1056 Jalan Perindustrian
Bukit Minyak 8, Kawasan Perindustrian Bukit Minyak,
14100 Simpang Ampat,
Penang, Malaysia
Tel: 604-507 9116
Fax: 604-508 9116
Country of Origin: China
Membership: Associate
Sanichem Resources Sdn Bhd
www.sanichem.my
PRODUCT
(1) Analytical testing (ETO RESIDUAL) on medical devices,
(2) Microbiology testing (sterility, bioburden, BnFetc) on medical devices
(3) Water quality testing.
COMPANY NAME & ADDRESS
Sanichem Resources Sdn Bhd
N0 7 & 7A, Jalan Timur 6/1A,
Mercato @ Enstek
Bandar Baru Enstek, Negeri Sembilan
71760 Malaysia
Tel: 606- 7947606
Fax: 606-7947607
Country of Origin: Malaysia
Membership: Associate
Dexcom (Malaysia) Sdn Bhd
www.dexcom.com
PRODUCTS
Manufactures, produces and distributes continuous glucose monitoring systems for diabetes management
COMPANY NAME & ADDRESS
Dexcom Malaysia Sdn Bhd
PMT775, Persiaran Cassia Selatan 4,
Simpang Ampat
14100 Penang
Tel: (604) 5631700
Country of Origin: USA
Membership: Associate
PRODUCT
Medical device for test and treatment of arrhythmia
COMPANY NAME & ADDRESS
JLL Malaysia Sdn Bhd
PMT 1224 Jaln PSPN 3, Penang Science Park North,
Simpang Ampat, 14100 Penang
Tel: (+604) 518 7777
Country of Origin: Japan
Membership: Associate
AMMI Chairman / Director Government Affairs & Board of J&J Msia
Andy joined Johnson & Johnson in 2015 and leads the Government Affairs & Policy function for J&J’s total enterprise in Malaysia & Singapore.
Andy is a member of the J&J Malaysia’s Country Management Board and actively represent J&J, in lead positions, in various trade associations including in Association of Malaysian Medical Industries; Pharmaceutical Association of Malaysia and American Malaysian Chamber of Commerce.
He has over 19 years of Government & Public Affairs experience in various industry including Medical Device, Pharmaceutical and FMCG businesses, particularly, in the field of industry policy issues management and advocacy strategies in shaping the operating environment. Prior to joining J&J, Andy held various Government & Corporate Affairs positions in numerous multi-national corporations including Sanofi and Merck Sharp & Dohme.
Special Advisor to the Chief Minister of Penang
As a Director of Invest-in-Penang Berhad, Penang Development Corporation and Penang Hill Corporation, Dato’ Seri Lee is actively involved in deciding the policy direction of these government-linked corporations for the State of Penang since 2008.
Dato’ Seri Lee is a member of the Investment Committee of Areca Capital, a licensed fund manager for individuals, corporations and institutions. He is also an adjunct Researcher of Penang Institute and writes regularly on subjects covering investment and economic development.
Additionally, Dato’ Seri Lee sits on companies listed on Bursa Malaysia as well as private companies. Industries covered by these companies/corporations include manufacturing, packaging, logistics, research/ design/ development of electrical & electronics equipment, trading, food production, tourism, township & property development, wealth management & startup mentoring.
Being a former member of the federal legislature & the state local council, Dato’ Seri Lee has an in-depth understanding of the workings of the public sector.
Dato’ Seri Lee is a Barrister at Law of Middle Temple & a Certified Financial Planner.
AMMI Treasurer.
Country Manager, Paramit.TECAN
Michel joined Paramit Malaysia in 2016. He brings over 30 years of experience in the EMS, High Tech and Electronics Industries. Michel combines OEM and EMS experience as he worked in various businesses for the Philips Group, NXP Semiconductors, Escatec , Flextronics. During his career he has gained extensive experience in multi- cultural and international environments.
Michel has a MSc in electro-mechanical engineering from the Catholic University of Louvain and a Master of Acoustics from The Pennsylvania University.
AMMI Board of Directors,
VP, Global Operations & Sourcing, Gloves, Molnlycke Health Care
Jean-Christophe, “JC”, has 25 year experience in Industrial Operations mostly in Pharmaceuticals and Medical Devices. He holds an MBA and a Msc of Industrial Operations from Kedge in
Bordeaux France.
JC spent the first 5 years of his career with Sanofi in London and Paris. Then, he spent the next 10 years in Sydney and Singapore in APAC Regional Management roles. He then moved to Hanzhou with Robert Bosch for 2 years to head the APAC Industrial Strategy and build a factory in Chengdu. In 2012 he joined Menarini, back in the Pharmaceutical industry for 8 years based in Singapore as Vice President APAC Operations and Director of the board of PT Menarini Indria in Jakarta.
He joined Molnlycke, based in Penang, in September 2020 where he is in charge of 4 Surgical Gloves factories and 2500 employees in Selangor and Kedah. He is also the General Manager and
Director at the board of Molnlycke Health Care Sdn Bhd.
VP, Central Functions Plant Operations.
B. Braun Medical Industries
Elmar has been serving B. Braun for 3 years, starting as the Head of operational excellence for the Center of Excellence for intravenous access (IVA). In the meantime, his leadership scope has been extended to all the central functions of the Penang plant operations such as facility management, environment-health-safety & security, project management office and operational excellence. Prior to joining B. Braun, he was involved mainly in the semiconductor industry from 2002 onwards in various managerial positions in the areas of operational excellence and industrial engineering.
Elmar is also a committee member of FREPENCA – The Free Industrial Zone , Penang – Companies Association and serves as the AMMI-OPEX workstream -representative for B. Braun.
He graduated from the Technical University in Graz, Austria with a Diploma in mechanical & chemical engineering, specializing in systems engineering.
APAC Regional Senior HR Director
Teleflex Medical Sdn Bhd
Tan Lin Im has over 20 years’ HR experience in multinational companies. She is currently the APAC Regional Senior HR Director for Teleflex Medical Sdn Bhd.
Teleflex is a global provider of medical technologies designed to improve the health and quality of people’s lives. With 17 sites globally , Teleflex Malaysia ( manufacturing and R&D) is located in Kulim, Kedah & Kamunting, Perak.
Education
Manufacturing VP
UHWM
Jason Ng has over 10 years of industry experience. He specializes in medical devices manufacturing and has extensive knowledge on quality management system, product design, validation, and regulatory requirements.
POSITIONS
EDUCATION
Vice-President, Operations
Boston Scientific Penang
Fearghal leads Boston Scientific Penang’s Senior Leadership Team and oversees all aspects of the Penang manufacturing and distribution site.
Fearghal started his career with Boston Scientific in the Cork, Ireland plant in 2005, as a manufacturing engineering manager. Since then, he has held various international roles across engineering, process development, project management, and supply chain. From 2011 to 2013, having relocated with his family to the US, he was the operations site lead for the Asthmatx and Revascular Therapeutics acquisitions, both based in Sunnyvale, California. He returned to the Cork site as production director, during which time he also led the acquired Celonova operations site in Ulm, Germany.
Fearghal came to Penang Malaysia with his wife and 3 boys in 2016, where he joined the Penang site leadership team as the Operations Director with responsibility for both production and materials functions.
Fearghal has a wealth of experience in product design, engineering, production, lean manufacturing, and supply chain. Prior to joining Boston Scientific, he held several roles in Molex, Artesyn, General Semiconductor, and Johnson & Johnson. Fearghal holds a bachelor’s degree in Mechanical Engineering from the University of Limerick, Ireland, and Masters in Business Admin (MBA) from MTU, Ireland.
Fearghal is committed to driving operational excellence and continuous improvement through end-to-end supply chain collaboration, to support the customer. He is also passionate about cultivating a high-performing site culture, through coaching and talent development.
General Manager – Malaysia & Philippines
Head of Commercial Excellence India/SEA
Baxter International Inc.
George Kazzi, General Manager for Baxter Malaysia and Philippines, has worked in various roles within Baxter and in 3 different countries within South East Asia and Australia.
George brings extensive experience working in various markets and governments on developing models of care related to home care enablement and renal dialysis. He is passionate about making a difference in South Asians Economies by sharing his knowledge and experiences gained from other regions.
Chief Executive Officer of InvestPenang
Dato’ Loo Lee Lian is the Chief Executive Officer of InvestPenang, the principal investment promotion agency and wholly owned company of the state of Penang. It is the leading point of contact for investment attraction, facilitation and support for foreign and local businesses.
She came into her position in 2010 backed by 25 years of industry background in the various sectors of the manufacturing industry. She is responsible for identifying new areas of growth and strategizing the state’s investment and industrial policies. Underpinned by the state and InvestPenang’s achievements, the sustained performances of the manufacturing and services sectors have elevated Penang’s per capita income and maintained the state’s status as an economic powerhouse of Malaysia.
Dato Loo has led companies in strategic planning, project management, operations, business development, supply chain management, customer strategies, and international business migration. Her invaluable experience has made her a highly sought-after guest speaker at multiple corporate conferences and also community seminars focusing on job diversity, women empowerment and youth education programs.
Dato Loo holds concurrent appointments as a Director in Penang STEM, member of the Selection Committee of the Penang Future Foundation, Penang State Government’s scholarship program for university undergraduate studies, and is the Chairperson of the Penang i4.0 Seed Fund Evaluation Committee.
Born and bred in Penang, Dato Loo graduated with Bachelor of Economics from the University of Adelaide, South Australia, and received her MBA from the University of South Australia.
Ir. Dr. Nasrul Anuar Abd. Razak
Head of Biomedical Department
University of Malaya
Nasrul Anuar has over 10 years of academic and research experience in Biomedical Engineering. He specializes in medical devices manufacturing such as rehabilitation, prosthetics, orthotics, and assistive devices. He also has extensive knowledge on education, standard and curriculum for Biomedical Engineering and Management.
YAB Tuan Chow Kon Yeow
Chief Minister of Penang
YAB Tuan Chow Kon Yeow is Penang’s fifth Chief Minister. He assumed the State’s top leadership role after Pakatan Harapan’s thumping victory in Malaysia’s 14th General Elections in May 2018. He has also been a Penang State Executive Councilor since 2008.
He has been the DAP Penang State Chairman since 2000 and DAP National Vice-Chairman since 2004.
In a recent interview after his swearing-in, the fifth Chief Minister of Penang reiterated his administration’s commitment to ensure delivery of three mega projects, namely the Penang Transport Master Plan, flood mitigation and affordable housing. Undaunted by the higher expectations, he takes this as a challenge to serve Penangites and find ways to make this state, a better home for all.
Besides that, YAB Tuan Chow also aims to transform Penang into ‘A Family-Focused Green and Smart State that Inspires the Nation’ with the Penang2030 Vision and this is the current focus of the State Government.
Director
KLS Martin Group
Dato’ Hans brings with him a wealth of medical device manufacturing and commercialisation knowledge and venture partnering experience with strong business networks, especially in the Asia Pacific region. He is an accomplished leader with more than 32 years of management, production, marketing and business development experience in the medical device industry, thereof the last 24 years in Asia.
Besides being Director of KLS Martin in Penang he established a number of Malaysian-based firms undertaking OEM and private label manufacturing for medical devices as well as business development in the Asian markets.
Previously, Dato’ Hans was the President for B. Braun, based in Penang, Malaysia, responsible for the entire Asia-Pacific business including manufacturing, sales and marketing in all Asian countries including Japan and China.
Director, Manufacturing Engineering
Boston Scientific
Sayron Ruiz is the Manufacturing Engineering Director for Boston Scientific operation in Penang, Malaysia. Boston Scientific is delivering on its mission to transform lives through innovative medical solutions that improve the health of patients around the world. Penang is the first Manufacturing and Distribution Site in Southeast Asia, and it is dedicated to support a critical portfolio of products including Angioplasty Balloons for Interventional Cardiologist and Peripheral Interventional businesses, Urology Laser Fibers and Gastrointestinal Biopsy Forceps for the Med-Surge Division.
Sayron has been with Boston Scientific for 16 years, supporting different Operations positions and his leadership has been instrumental in the growth of different Boston Scientific Sites by influencing and championing a culture of innovation, operational excellence, lean manufacturing, six sigma, technical people development and global collaboration in many several initiatives for base business sustaining, commercial manufacturing transfers and new product & acquisition integrations.
Sayron holds a Bachelor’s Degree in Electronics Engineering and a Master’s Degree in Modern Manufacturing Systems both from Costa Rica Institute of Technology (TEC).
Sayron’s career spans more than 22 years of success in building strong engineering teams relying on the best industry practices and enabling high-performance organizations. Prior to joining Boston Scientific, Sayron works as an automation engineering leader in the food industry.
Sayron has been actively involved in Diversity & Inclusion demonstrating great leadership in key change management processes while shaping value-driven organizational culture.
Director, Operational Excellence
B. Braun Medical Industries
Hawwa has almost 20 years of managerial experience in various sectors mainly in Aerospace & Defense. She has been working with B. Braun for one year as the Head of Operational Excellence for Asia Pacific and for the Center of Excellence for intravenous access (IVA). She is also in charge of the Digital Qualification Hub (DQH) at BMI.
Prior to joining B. Braun, she was involved in consulting activities where she brought her expertise in Business Management, Operational Excellence and Change Management.
She is graduated from the Technical University of Compiegne (UTC) in France with a Diploma in mechanical engineering.
Human Resources Director
Boston Scientific
Joyce is the Human Resources Director and part of the pioneer team for Boston Scientific’s first operation hub in Asia. She joined Boston Scientific Penang in 2016 and has been an instrumental player in helping the company build its Human Resources Department. In her current role, she is responsible for overseeing the Company’s human resources activities in Penang, including Talent Acquisition, Total Rewards, HRBP, Communication, Talent Management, Employee Services, and Global Mobility. During her tenure, she has successfully implemented several improvements to the company’s human resources functions including establishing a solid employer branding strategy to attract and retain quality talents for operational growth.
Joyce is very passionate about creating a workplace culture focusing on prioritizing the people. She is a strong advocate for diversity, equity, and inclusion. She believes that building the right culture at work is the fundamental towards organizational success. She is also the sponsor of company’s Young Professionals Network (YPN) and is very devoted in helping young people unleash their potential and find their purposes in career. Joyce holds a Master’s Degree in Public Administration and a Bachelor Degree in Humanities, from Universiti Sains Malaysia (USM).
Deputy CEO
Investment Development
Malaysian Investment Development Authority (MIDA)
Ms. Lim Bee Vian has been with the country’s main investment promotion agency i.e. the Malaysian Investment Development Authority (MIDA) since 1991. She holds a Bachelor of Economics (Hons) degree from the Northern University of Malaysia. She has been involved in various functions of MIDA and has experience in policy advocacy and investment promotion for the manufacturing and services sector in Malaysia. She was involved directly in the drafting of the services chapter in the Third Industrial Master Plan (IMP3) which outlined the development strategies of selected services sectors from 2006 to 2020. She has also guided her officers to provide ideas and inputs for the New Industrial Master Plan, 2021 – 2030.
She has held various management positions in MIDA i.e. Director of Industry Talent Management, Executive Director for Strategic Planning (Services), Executive Director, Services Development and now she is the Deputy Chief Executive Officer, Investment Development.
Managing Director & Site Leader
Smith & Nephew Operations Sdn Bhd
Mark Arthun is the Managing Director & Site Leader for Smith+Nephew Operations Sdn Bhd. He oversees the manufacturing of orthopedic implants at Smith+Nephew’s manufacturing facility in Penang, Malaysia – a new greenfield facility with an investment of over $100M USD and a target to hire up to 800 Malaysians.
With a career spanning both the aerospace and medical device industries, Mark is a global operations leader with extensive experience in Operations and Operational Excellence. Before joining Smith+Nephew, Mark held leadership positions at Abbott, Alere, and Boeing.
In addition to Mark’s role at Smith+Nephew, he is the Chair of the Board at the British Malaysian Chamber of Commerce and a Management Council member at the Penang Skills Development Center.
Mark is from Montana in the United States and holds a B.Sc. in Industrial Engineering from Montana State University in Bozeman, Montana. Mark has relocated from the United States to Penang with his wife, Jocelyn.
Vice President – APAC Operations
Columba joined Dexcom over 2 years ago as Vice President of Operations with responsibility for the start-up of their new manufacturing facility in Penang. Scheduled to go into commercial production is 2023 the Penang project represents a more than US$500 million investment for Dexcom and is expected to create over 2,500 new jobs in the coming few years.
Columba has over 20 years’ experience in the Pharmaceutical and Medical Device industry and prior to joining Dexcom, held Management positions at both Abbott and AbbVie across Manufacturing and Engineering in Ireland and Puerto Rico.
Columba has a degree in Mechanical Engineering from the University of Galway in Ireland.
Vice-President – Manufacturing, Malaysia
Samuel has over 25 years of experience in consumer electronic, implantable medical device manufacturing & logistics operations. Graduating from RMIT University, Australia, Samuel joined Seagate Singapore in 1994 and took up various roles across South East Asia.
In 2007, Samuel moved to Sydney and joined Cochlear. Here, he continued embracing opportunities and new challenges culminating in his final Sydney-based role as the Head of Manufacturing Engineering.
Subsequently, in 2016 Samuel moved to Malaysia to build the manufacturing & global logistics facility from scratch to support Cochlear’s growing global demand. Currently, he is responsible for manufacturing & logistics operations as a Vice President of Malaysian operations.
Deputy Director
Green Technology Division
Malaysian Investment Development Authority (MIDA)
Gogielan has held numerous posts in MIDA. He joined MIDA as Assistant Director at ICT and Electrical Division in 2005 and was responsible to evaluate applications for Manufacturing licenses, Incentive and expatriate posts, and promotional activities in specific industries.
From 2013, he was attached to Green Technology Division and was involved in evaluating incentives and expatriate posts for renewable energy, energy efficiency, and waste management. He was involved in providing inputs and in the formulation and review of policies, strategies, and guidelines for the Green Technology Incentive, as well as preparation of incentives proposal for the Annual Budget. He is currently the Deputy Director of the Green Technology Division, MIDA.
Executive Director
Tako Astatic Technology
Aaron Kow (BBusCom) is the Executive Director of Tako Astatic Technology Sdn Bhd. He currently oversees the Operation, Marketing and R&D activities in the company since 2018.
He plays a key role in implementing various continuous improvement projects pertaining to manufacturing excellence in an ultimate goal to pursue zero product rejection to customers.
He is also very active in developing new innovative technical packaging materials with the world’s sustainability trend in mind and has successfully commercialised various technical performance films in the surgical/cleanroom glove industry.
He is instrumental in upgrading and expanding its manufacturing capabilities with a wide range of speciality products in growing TAKO’s foothold in the Medical & Cleanroom Flexible Packaging Industry.
Deputy Managing Director
Japan Lifeline (JLL Malaysia)
ADT Biotech Sdn Bhd
https://adt-biotech.com/
PRODUCTS
In Vitro Diagnostic Devices
COMPANY NAME & ADDRESS
ADT Biotech Sdn Bhd
307, Block B, Phileo Damansara 1, , 9 Jalan 16/11,
Petaling Jaya, Selangor, Malaysia., 46350
Tel: (03) 793-16760
Country of Origin: Malaysia
Membership: Associate
Opulent Solutions Sdn Bhd
www.opulent-group.com
PRODUCTS
1) Printed circuit board assembly (PCBA) for Endoscopy
2) Printed circuit board assembly (PCBA) of Blue Light Therapy for Psoriasis
3) Printed circuit board assembly (PCBA) of medical devices for the treatment of sleep apnea and other
respiratory conditions
4) Full box build integration assembly for hair growth product
SERVICES
EMS services provider. Provide vertical integration services from PCB to PCBA and till full box build integration assembly
COMPANY NAME & ADDRESS
Opulent Solutions Sdn Bhd
Plot III Bayan Lepas Industrial Park,
Lebuh Raya Kampung Jawa
Bayan Lepas, Pulau Pinang, 11900
Tel: (604) 640-8698
Country of Origin: Singapore
Membership: Associate
Puncak Bumi Utama Sdn Bhd
www.pbumed.com
PRODUCTS
Patient isolation transporter, medical healthcare beds, medical peripheral and accessories
COMPANY NAME & ADDRESS
Puncak Bumi Utama Sdn Bhd
S-3, S-4, S-10 & KIM 2 Lorong Kendi 1,
Jalan Kendi, Kawasan Industri MARA,
14100 Simpang Ampat,
Seberang Perai Selatan, Pulau Pinang, Malaysia.
Tel: (604) 640-8698
Country of Origin: Malaysia
Membership: Associate