26 -28 August 2026: AMMI at IMDEC

Abbott Penang
(St. Jude Medical Operations (Malaysia) Sdn. Bhd)
www.abbott.com

COMPANY NAME & ADDRESS

Abbott Penang
Plot 102, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Industrial Zone,
Penang, Malaysia

Tel: 04-810 1000
Fax: 04-810 1001

Parent company: USA
Membership: Full

WHAT WE DO
Abbott’s manufacturing facility in Bayan Lepas, Penang, established in 2009, specializes in producing high-tech, life-saving cardiovascular devices, including pacemakers, implantable cardioverter defibrillators (ICDs), and cardiac monitoring leads

Ambu Sdn Bhd
www.ambu.com

ADDRESS

Lot 69B Lintang Bayan Lepas 6 Phase IV,
11900 Penang, Malaysia

Tel: 04-252 9000
Fax: 04-644 8932

Parent company: Denmark
Membership: Full

WHAT WE DO
The Penang facility is responsible for producing single-use endoscopes (pulmonology, urology, ENT, GI) and other medical devices, shipping millions of units globally.

Ansell Global Trading Center (Malaysia) Sdn. Bhd.
www.ansell.com

ADDRESS

Prima 6, Prima Avenue, Block 3512,
Jalan Teknokrat 6, 63000
Cyberjaya, Malaysia.

Tel: 03-8310 6688
Fax: 03-8318 6699

Parent company: Australia
Membership: Full

WHAT WE DO
Ansell Malaysia (Ansell N.P. Sdn. Bhd./Ansell Global Trading Center) is a major manufacturing and commercial hub for Ansell Limited, a global leader in personal protection solutions.

We manufacture, develop, and distribute high-performance protective gloves, garments, and safety products for the healthcare, industrial, chemical, and life sciences sectors.

Medical Device products include sterile surgical gloves, single-use examination gloves, and operating room consumables for hospitals and clinics.

Amcor Flexibles Asia Pacific

(Bemis Asia Pacific Sdn Bhd)
www.amcor.com

ADDRESS

Lot 823, Jalan Subang 5, Taman Perindustrian Subang USJ 1,
47600 Subang Jaya, Selangor, Malaysia.

Tel: 03- 8021 0998 (General Line)
Fax: 03- 8021 0000

Parent company: USA
Membership: Full

WHAT WE DO
Amcor Malaysia is a key hub for Amcor Flexibles Asia Pacific, specializing in developing and manufacturing advanced healthcare packaging solutions. The company produces medical-grade packaging, including sterile barrier systems, pouches, and top/bottom substrates for medical devices, pharmaceuticals, and diagnostics.

Ain Medicare Sdn Bhd
www.ainmedicare.com.my

ADDRESS

Jalan 6/44, Kawasan Perindustrian Pengkalan Chepa 2,
Kota Bharu 16100, Kelantan.

Tel : +609 7743 388
Fax : +609 7742 205

Parent company: Malaysia
Membership: Full

WHAT WE DO
Ain Medicare is a leading manufacturer of sterile pharmaceutical products. They specialize in producing intravenous infusions, hemodialysis concentrates, peritoneal dialysis solutions, and small-volume injections for healthcare, including Blow-Fill-Seal (BFS) technology and contract manufacturing (OEM).

Allen Healthcare Products (M) Sdn Bhd
www.ahpbio.com

ADDRESS

17, Lorong Nagasari 2, Taman Nagasari,
13600, Perai Penang, Malaysia

Tel: 604-3901168
Fax: 604-3831334

Parent company: Malaysia
Membership: Full

WHAT WE DO

Allen Healthcare Products (AHP) is a biotechnology company established in 1996 that specializes in manufacturing and supplying in-vitro diagnostics (IVD) and rapid, point-of-care (POC) test kits. Their product range includes infectious disease, fertility, and drug-of-abuse tests (e.g., HIV, Hepatitis B, Dengue, Malaria).

APS Medical Sdn Bhd
www.apsmedical.com.my

ADDRESS

28-32 Jalan Teluk Batu 36/2, Batu 4 1/2,
Jalan Kebun, Seksyen 36, 40470 Shah Alam,
Selangor, Malaysia.

Tel: 03-5162 2618
Fax: 03-5162 2619

Parent company: Malaysia
Membership: Full

WHAT WE DO

A.P.S Medical manufactures and distributes single-use, disposable medical devices. The company specializes in producing surgical, anesthetic, respiratory, and gastroenterology products, such as suction tubes, extension tubes, and mucus extractors, operating within a Class 100K clean room.

Balchem Sdn Bhd
www.balchem.com

ADDRESS

37, Lorong Sungai Puloh 1A/KU6,
Taman Teknologi Gemilang, Kawasan Perindustrian Sungai Puloh,
41050 Klang Selangor.

Tel : 03-3290 2263
Fax : 03-3290 2016

Parent company: USA
Membership: Full

WHAT WE DO
Balchem Malaysia, formerly Stereo Sdn Bhd, is a key component of Balchem’s Performance Gases – Asia Pacific division. We specialize in the sales, distribution, and handling of specialized gases, most notably ethylene oxide for medical device sterilization

Becton-Dickinson Sdn Bhd
www.bd.com

ADDRESS

Lot 57C, Lorong Perusahaan 5,
Kulim Industrial Estate, 09000
Kulim, Kedah, Malaysia

Tel: 04 – 4801300
Fax: 04 – 4891737

Parent company: USA
Membership: Full

WHAT WE DO
Becton-Dickinson (BD) is a major global medical technology company, operating since 1987, focused on advancing health through manufacturing, research, and distribution of medical devices, instrument systems, and reagents. They specialize in patient/healthcare worker safety, diagnostics, and medication management with facilities in Kulim (manufacturing), Penang, and Kuala Lumpur (commercial/shared services).

Main products include hypodermic needles/syringes, intravenous (IV) catheters, automated medication management systems, pre-fillable drug delivery systems, diagnostic instruments, and flow cytometry tools.

B.Braun Medical Industries Sdn Bhd
www.bbraun.com.my

ADDRESS

Bayan Lepas Free Industrial Zone, P O Box 880,
10810 Penang, Malaysia

Tel: 04-632 3100
Fax: 04-643 3750

Parent company: Germany
Membership: Full

WHAT WE DO
B. Braun offers a comprehensive portfolio of medical devices, pharmaceutical solutions, and surgical instruments, with major manufacturing operations in Penang producing intravenous catheters for global markets. Key product areas include infusion therapy (pumps, sets), nutrition therapy, anesthesia, and surgical instruments/sutures.

Boston Scientific Medical Device (Malaysia) Sdn Bhd
www.bostonscientific.com

ADDRESS

PMT 741, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan 14100,
Bandar Cassia,Penang, Malaysia

Tel : + 604-5556688
Fax : +604-5556699

Parent company: USA
Membership: Full

PRODUCTS

Boston Scientific in Penang, Malaysia, operates a major manufacturing facility and a global distribution center in Batu Kawan, focusing on producing and distributing advanced medical devices for cardiology, endoscopy, and urology. It serves as a key hub for Asia-Pacific, manufacturing millions of devices like balloon catheters and laser fibers, while also managing regional supply chain, finance, and R&D activities.

Alcon Johor
(Ciba Vision Johor Sdn Bhd)
www.alcon.com

ADDRESS

Ciba Vision Johor Sdn Bhd
No.1 Jalan DPB/5,
PelabuhanTanjung Pelepas
81560, Gelang Patah, Johor
Malaysia

Tel: (07) 504 3636
Fax: (07) 507 1759

Parent Company: Switzerland
Membership: Full

WHAT WE DO

CIBA Vision Johor Bahru (officially known as Alcon Johor Sdn. Bhd.) is a major manufacturing facility located in the Pelabuhan Tanjung Pelepas (PTP) Free Trade Zone in Johor, Malaysia.

Established in 2005, the plant is a critical, high-tech manufacturing hub for Alcon globally, specializing in the production of, and research into, high-quality, sterile, soft contact lenses. Contact Lens

Cochlear Malaysia Sdn Bhd
www.cochlear.com

COMPANY NAME & ADDRESS

Unit UG1, Upper Ground Floor, Vertical Podium,
Avenue 3, Bangsar South, No.8, Jalan Kerinchi,
59200, Kuala Lumpur, Malaysia.

Tel : +603 2282 3839
Fax : +603 2282 3839

Parent company: Australia
Membership: Full

WHAT WE DO

Cochlear Malaysia operates as a major global hub for Cochlear Limited, focusing on the manufacturing, repair, and distribution of implantable hearing devices, such as the Nucleus cochlear implant and Baha bone conduction implants.

Located in Kuala Lumpur, this facility supports the production of hearing implant sound processors for more than 180 countries, acting as a global center of excellence for repairs and manufacturing.

Diptech Industries Sdn Bhd
www.diptech.com.my

COMPANY NAME & ADDRESS

No.11 Jalan Angsana 1/3, Taman Perindustrian Angsana,
08000 Sungai Petani, Kedah

Tel : 604 422 3688
Fax : 604 424 0941

Parent company: Malaysia
Membership: Full

WHAT WE DO

Diptech Industries founded in 1998 and based in Malaysia, is an ISO-certified OEM manufacturer specializing in high-quality, latex and latex-free medical dipped rubber products. We produce airway devices, breathing bags, and test lungs for global clients, with expertise in custom, durable medical rubber goods.

Our products: Single Coated Medical Tapes, Double Coated Medical Tapes, Medical Woven & Non Woven Tapes, Release Liners Hydrocolloids. Leap Pads etc.

DuPont Malaysia Sdn Bhd
www.dupont.com

COMPANY NAME & ADDRESS

DuPont Malaysia Sdn Bhd
Level 7, Menara CIMB,
Jalan Stesen Sentral 2, Kuala Lumpur Sentral,
50470 Kuala Lumpur

Tel: 603-285 90700
Fax: 603-285 99079

Parent company: USA
Membership: Full

WHAT WE DO

DuPont plays a critical role in the Malaysian medical device industry, providing advanced, sterile, and sustainable packaging materials to support the country’s status as a major regional MedTech hub.

With a strong presence in Johor through its Spectrum™ Plastics Group, DuPont supplies high-performance materials like Tyvek® for sterile barrier systems and is actively involved in sustainable, high-volume manufacturing solutions in the region.

Epsilon Medical Devices Sdn Bhd
epsilon-group.com

PRODUCT
Medical Devices

COMPANY NAME & ADDRESS
Lot 5271, Jalan Perusahaan 3 Kamunting Industrial Area
34600 Kamunting, Perak

Tel : 05-8913158
Fax : 05-8911266

Parent company: Malaysia
Membership: Full

Intersurgical Medical Sdn. Bhd
(formerly known as Engineered Medical Systems Malaysia Sdn. Bhd)
www.intersurgical.com.my.

COMPANY NAME & ADDRESS

993, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat,
Pulau Pinang.

Tel : +604 504 1252
Fax : +604 504 1253

Parent company: UK
Membership: Full

PRODUCT
Comprehensive range of medical devices for airway management, anesthesia, critical care, and oxygen & aerosol therapy. Product lineup includes i-gel supraglottic airways, breathing systems, filters, masks, and, in particular, Starmed CPAP/NIV helmets.

Fresenius Medical Care Production Sdn Bhd
www.freseniusmedicalcare.my

COMPANY NAME & ADDRESS

Lot 34618 PT29466, Bandar Enstek,
Mukim Labu, 71760 Bandar Enstek,
Negeri Sembilan.

Tel: 606-791 5334
Fax: 606-791 5336

Parent company: Germany
Membership: Full

PRODUCTS
We offer a full range of haemodialysis machines, peritoneal dialysis systems, water treatment systems, dialysis consumables, medical treatment chairs and other related products.

Haemonetics Malaysia Sdn Bhd
www.haemonetics.com

COMPANY NAME & ADDRESS

Plot 308, Persiaran Cassia Selatan 1,
Taman Perindustrian Batu Kawan,
14100 Simpang Ampat,
Seberang Perai Selatan, Penang.

Tel: 604-643 3897

Parent company: USA
Membership: Full

PRODUCTS
Apheresis devices and related blood management products for the global market.

Hospitech Manufacturing Services Sdn Bhd
hospitech.my

COMPANY NAME & ADDRESS

Sub Lot, 1 Lot 6536, Batu 6 Jalan Bukit Kemuning,
40460 Shah Alam.

Tel: 03-5122 5199
Fax: 03-5122 5204

Parent company: Malaysia
Membership: Full

PRODUCT
Surgical tubing, suction catheters, disposable dressing kits/respirators, oxygen mask, nasal cannula, PVC catheters, bandages & gauze, burn sets, thoracic drainage system, mucous extractors, surgical connecting tubes, underwater chest drainage bottles

Ideal Health Care Sdn Bhd
www.idealcare.com.my

COMPANY NAME & ADDRESS

Ideal Health Care Sdn Bhd

Lot PT 60598
Kawasan Perindustrian LPK Fasa 1
08000 Sungai Petani Kedah
Tel: 04-444 6875
Fax: 04-444 5975

Membership: Full

PRODUCTS

Manufacturer and distributor of medical disposable and healthcare products, offering solutions in anesthesia, respiratory care, urology, and PPE.

Medical Disposable Products include:

– Foley catheters
– IV Catheters
– Endotracheal tubes
– Tracheotomy tubes
– IV Infusion Sets
– Blood Transfusion Sets
– Respiratory Care Products
– Surgical Face Masks
– Procedural Sets

ITL Asia Pacific Sdn Bhd
www.itl-limited.com

COMPANY NAME & ADDRESS

Plot 17B, Lorong Bemban 2, Bemban Industrial
Estate, 31000, Batu Gajah Perak

Tel: 05-3217 586
Fax: 05-3217 498

Parent company: Australia
Membership: Full

PRODUCTS
A comprehensive range of high-quality medical devices focused on blood sampling, collection, and transfer, as well as clinical procedure kits. Key products include the SampLok® blood sampling kits, DonorCare® needle guards, and various IV start kits, procedure packs, and sharps safety devices

KLS Martin Malaysia Sdn Bhd
www.klsmartin.com

COMPANY NAME & ADDRESS

No.1193, Lorong Perindustrian Bukit Minyak 11,
Taman Perindustrian Bukit Minyak,
14100 Simpang Ampat, Penang.

Tel : +604 506 2380
Fax : +604 506 2303

Parent company: Germany
Membership: Full

PRODUCT
We offer instruments, implants, HF units, surgical laser systems, OR lights, medical supply units, telemedicine, etc.

INTEGER (Lake Region Medical Sdn Bhd)
www.integer.net

COMPANY NAME & ADDRESS

No. 91-B, Lebuhraya Kampung Jawa,
11900 Bayan Lepas Penang, Malaysia.

Tel: 04-810 1818
Fax: 04-643 1232

Parent company: USA
Membership: Full

WHAT WE DO
We specialize in the design and manufacturing of high-quality medical device components, particularly for cardiology, vascular, and neurovascular markets. Key products include precision catheters, guidewires, introducers, and, as part of the Integer portfolio, medical textiles and device component

Cardinal Health
(Mediquip Sdn Bhd)
www.cardinalhealth.com

COMPANY NAME & ADDRESS

Padang Lati, Mukim Paya, Jalan Santan,
02450 Beseri, Perlis, Malaysia.

Tel: 04-938 1411
Fax: 04-938 2150

Parent company: USA
Membership: Full

PRODUCTS
Distributor and manufacturer of medical, surgical, and laboratory products, providing solutions for hospitals, labs, and home health. Our portfolio includes high-quality surgical gloves, infection control products (masks, apparel), wound care, fluid management, and lab consumables.

Meditop Corporation (M) Sdn Bhd

www.top-tokyo.co.jp

COMPANY NAME & ADDRESS

Lot 3, Persiaran Usahawan,Taman iks, Seksyen 9,
43650 Bandar Baru Bangi, Selangor.

Tel: 03-8924 0999
Fax: 03-8925 8660

Parent company: Japan
Membership: Full

PRODUCT
Infusion pumps, syringe pumps, catheters, and IV devices.

Medical Innovation Ventures Sdn Bhd
www.mediven.com.my

COMPANY NAME & ADDRESS

Medical Innnovation Ventures Sdn Bhd
Level 4, Biopharmaceutical Block,
IPHARM, NIBM, MOSTI, Block 5-A, Halaman Bukit Gambir
Gelugor, 11700 Penang
Malaysia

Tel: (+604) 6562824
Fax: (+604) 6562824

Website: www.mediven.com.my

Parent Company: Malaysia
Type of membership: Associate

WHAT WE DO
We are a molecular diagnostics company (founded in 2012) that researches, develops and manufactures advanced diagnostic kits for infectious diseases. We specialize in fast, affordable, and accurate point-of-care, molecular tests—such as GenoAmp™ and ProDetect™—for diseases like dengue, Zika, and COVID-19.

Molnlycke Health Care Sdn Bhd

www.molnlycke.com

PRODUCT
Surgical Gloves and Dental Gloves

COMPANY NAME & ADDRESS

Lot 12A, Jalan Hi-Tech 7, Industrial Zone Phase 2,
Kulim Hi-Tech Park,
09090 Kulim, Kedah

Tel : +604-402 6500

Parent company: Sweden
Membership: Full

Muzamal Industries Sdn Bhd
www.muzamal.com

PRODUCT
Disposable syringe with needle & without needle, specimen container & sutures

COMPANY NAME & ADDRESS
Muzamal Industries Sdn Bhd
Lot 21, Jalan 3A, Kawasan Perindustrian Cheras Jaya 43200
Cheras Selangor
Tel: 603 -90763080
Fax: 603- 90803098

Parent Company :Malaysia
Membership : Associate

Orthomedic Innovations Sdn Bhd
www.orthomedic.com.my

PRODUCT
Orthopaedic Instruments and Implants

COMPANY NAME & ADDRESS
188-D, Jalan Sultan Azlan Shah, Sungai Tiram,
11900 Bayan Lepas, Penang, Malaysia.

Tel: +604 644 5139
Fax: +604 644 9139

Parent company: Malaysia
Membership: Full

Owen Mumford Sdn Bhd
www.owenmumford.com

PRODUCT
1. Packing of Pen Needles
2. Packing of Vaginal Dilators
3. Manufacture of Single-use Sterile Safety Lancets

COMPANY NAME & ADDRESS
No. 21, Jalan Bioteknologi 3 Kawasan Perindustrian SiLC Nusajaya,
79200 Johor

Tel: +607 5539617
Fax: +607 5539617

Parent company: UK
Membership: Full

Tecan CDMO Solutions PN Sdn Bhd
www.paramit.com

PRODUCT
PCBA for genome sequencing machine

COMPANY NAME & ADDRESS
Tecan CDMO Solutions PN Sdn Bhd
Plot 372, Penang Science Park, Lorong Perindustrian Bukit Minyak 21, Taman Perindustrian Bukit Minyak, 14100 Simpang Ampat
Seberang Perai Tengah, Penang, Malaysia

Tel : 604-540 7155
Fax : 604-540 7111

Parent company: Switzerland
Membership: Full

PENTAX Medical (Penang) Sdn Bhd
https://www.pentaxmedical.com/

PRODUCT
OEM Manufacturing- Endoscopic system

SERVICES
Repair of the endoscopy (service for own brand only)

COMPANY NAME & ADDRESS
PENTAX Medical (Penang) Sdn. Bhd.
Plot 12 & 13, Fasa 4
Hilir Sungai Keluang 3
Bayan Lepas, 11900 Penang, Malaysia

Tel: 604 6379800

Parent Company: Japan
Membership: Full

Prent Malaysia Sdn Bhd
prent.com.my

PRODUCT
Custom supplier of precision plastic thermoforming

COMPANY NAME & ADDRESS
PTD102587, Jalan Cyber 14, Senai Ind Park IV,
81400 Senai, Johor, Malaysia.

Tel: 07- 599 7661
Fax: 07-599 7660

Parent company: USA
Membership: Full

Sanmina-SCI Systems (Malaysia) Sdn Bhd
www.sanmina.com

PRODUCT
Electronic manufacturing services of finished medical devices and printed circuit board assemblies.

COMPANY NAME & ADDRESS
Plot 202, Lorong Perusahaan Maju 9 Bukit Tengah Industrial Estate
13600 Perai, Penang.

Tel : +604 508 1228
Fax : +604 508 1233

Parent company: USA
Membership: Full

Sina-Sterilgamma Sdn Bhd
www.sinasterilgamma.com

PRODUCT
Services in Sterilisation Technology

COMPANY NAME & ADDRESS
Sina-Sterilgamma Sdn Bhd
1-1 Jalan Bandar Rawang 11
Pusat Bandar Rawang
48000 Province: Selangor
Malaysia

Tel: (603) 60912055
Fax: (603) 60936872

Parent Company: Malaysia
Membership: Associate

Sin Yong Guan Industries Sdn. Bhd.
www.syg53.com

PRODUCT
Medical PVC Compound and Plastic Tubing for Medical

COMPANY NAME & ADDRESS
8 Solok Rishah 2, Kwsn Perindustrian Silibin 30100 Ipoh, Perak, Malaysia.

Tel: 05-526 7231
Fax: 05-526 8491

Parent company: Malaysia
Membership: Full

Ensera (formerly SteriPack)
www.ensera.com

PRODUCT
Contract manufacturing of medical devices and pharmaceutical products

COMPANY NAME & ADDRESS
PT119992, Jalan Canang Emas 8 Telok Gong,
42000 Klang Selangor, Malaysia

Tel : 03-3167 3596
Fax: 03-3167 3597

Parent company: Ireland
Membership: Full

Straits Orthopaedic Sdn Bhd
www.straitsortho.com.my

PRODUCT
Orthopaedic Devices

COMPANY NAME & ADDRESS
Straits Orthopaedics (Mfg) Sdn Bhd
483, Tingkat Perusahaan 4A
Prai Free Industrial Zone
13600 Prai, Penang
Malaysia
Tel: 604-3831885
Fax: 604-3838178

Parent Company: Malaysia
Membership: Associate

Symmetry Medical Malaysia Sdn Bhd
www.tecomet.com

PRODUCT
Medical sterilizing cases, medical instruments and orthopaedic implants.

COMPANY NAME & ADDRESS
Plot 80C, Kawasan Perusahaan Bayan Lepas,
11900 Bayan Lepas, Penang, Malaysia.

Tel : 04-645 6802
Fax : 04-6445805

Parent company: USA
Membership: Full

Synergy Sterilisation (M) Sdn Bhd
www.steris-ast.com

PRODUCT
Sterilization –Gamma, sterilization –ETO lab service, post process inspections logistics, provision of sterilisation process of medical products.

COMPANY NAME & ADDRESS
Plot 203 Kuala Ketil Industrial Estate,
09300 Kuala Ketil, Kedah, Malaysia.

Tel: 04-415 2111
Fax: 04-415 2121

Parent company: USA
Membership: Full

Teleflex Medical Sdn. Bhd.
www.teleflexmedical.com

PRODUCT
Anaesthesiology, respiratory, urology and home care medical devices.

COMPANY NAME & ADDRESS
Lot No PT2577, Jalan Perusahaan 4 Kamunting,
34600 Kamunting Perak.

Tel : 05-891 5111
Fax : 05-891 2699

Parent company: USA
Membership: Full

KoniX Life Sciences Sdn Bhd (formerly known as Texchem Life Sciences Sdn Bhd)
www.texchem-pack.com

PRODUCT
Disposable medical device and key components contract manufacturing.

SERVICES
Contract Manufacturinng and Polymer engineering solution

COMPANY NAME & ADDRESS
Lot 3, Jalan P/6 Kawasan Perindustrian Bangi,
Line 2, Bandar Baru Bangi 43650, Selangor.

Tel: +603-8925 0370
Fax: +603-8925 0317

Parent company: Japan
Membership: Full

Tomoe Malaysia Sdn Bhd
www.tomoeshokai.co.jp

PRODUCT
EO Sterilization Gas for Medical Devices

COMPANY NAME & ADDRESS
Lot 13, Jalan Kulim Hi-Tech 13,
Kulim Hi Tech Park Phase 3,
Kulim, Kedah 09000 Malaysia.

Tel : +604-492 4101
Fax : +604-492 4202

Parent company: Japan
Membership: Associate

Top Glove Sdn Bhd
www.topglove.com

PRODUCT
Latex powdered/ powder-free examination/sterile surgical gloves, nitrile powdered/ powder-free examination gloves, vinyl opowdered/ P-F examination gloves, household flocklined/Unlined gloves, coloured latex P-gloves(blue/green), green mint latex p-gloves, cleanroom gloves

COMPANY NAME & ADDRESS
Lot 4968, Bt 6 Jalan Teratai, Off Jalan Meru 41050 Klang

Tel: 03-3392 1992/1905
Fax: 03-3392 1291/8410

Parent company: Malaysia
Membership: Full

UWHM Sdn Bhd
www.uw-healthcare.com

PRODUCT
Disposable Oxygen Prefilled Humidifier, Disposable Oxygen Prefilled Nebulizer, Digital Oxygen Flow Meter, Digital Oxygen Humidifier Water Level & Humidity Sensor

COMPANY NAME & ADDRESS
UWHM Sdn Bhd
PMT 790, Jalan Cassia Selatan 5/2,
Taman Perindustrian Batu Kawan,
Bandar Cassia, Pulau Pinang,
14110, Malaysia.

Tel: 604-5855229
Fax: 604 – 5899677

Parent company: Malaysia
Membership: Full

BACTIGUARD (South East Asia) Sdn. Bhd
www.bactiguard.com

ADDRESS

No. 308, Jalan Perindustrian Bukit Minyak 18,
Penang Science Park, 14100 Penang, Malaysia.

Tel: 604-505 4241 / 505 9841
Fax: 604- 505 9367

Parent company: Malaysia
Membership: Full

PRODUCT
Surgical sutures, hernia meshes, wound management products, surgical implants and other surgical disposables.

Worldwide Medivest Sdn Bhd
www.wmsb.com.my

PRODUCT
Wound closure and surgical sutures

COMPANY NAME & ADDRESS
No. 2, Jalan Karyawan 4/KU7, Lorong Sg Puloh,
Taman Kapar Bestari, Kapar 42200, Selangor.

Tel: 603-3291 2625
Fax: 603-3291 2725

Parent company: Malaysia
Membership: Full

Zeito Plastic Components Sdn Bhd
www.zeito.com.my

PRODUCT
Manufacturing for Injection Molding Plastic Components & Assembly for Medical Devices.

COMPANY NAME & ADDRESS
Lot 9, Jalan CJ 1/7, Kawasan Perusahaan Cheras Jaya, Jalan Balakong, 43200 Cheras , Selangor Darul Ehsan.

Tel : 03-9074 9177
Fax : 03-9074 9096

Parent company: Malaysia
Membership: Full

Solventum Malaysia Sdn Bhd
www.solventum.com

PRODUCT
Dental Devices, Laboratory Equipment

COMPANY NAME & ADDRESS
Level 8, Block F, Oasis Square No.2, Jalan PJU1A/7A,
Ara Damansara, 47301 Petaling Jaya, Selangor.

Tel : 603-7884 2888
Fax : 603-7884 2902

Parent company: USA
Membership: Associate

Alliance Contract Manufacturing Sdn Bhd
www.acm-holdings.com

PRODUCT
Manufacture of medical devices and equipment

COMPANY NAME & ADDRESS
2006, Jln Jelawat
Seberang Jaya Industry Estate
Prai, 13700 Penang

Telephone : (604) 2912888
Fax : (604) 2912999

Country of Origin: Malaysia
Membership: Associate

Alcon Laboratories (Malaysia) Sdn Bhd
www.alcon.com

PRODUCT
Authorized Representative
Surgical equipment and contact lense care products

COMPANY NAME & ADDRESS
Alcon Laboratories (M) Sdn Bhd
Level 20-1, Tower B, Plaza 33
No.1, Jalan Kemajuan, Seksyen 13
Petaling Jaya
Selangor
46200 Malaysia

Tel : (603) 79481888
Fax (603) 79481888

Parent Company: Switzerland
Membership : Associate

Baxter Healthcare Sdn Bhd
www.baxter.com.my

COMPANY NAME & ADDRESS
B-21-3A, Level 21, The Ascent, Paradigm, No.1,
Jalan SS7/26A, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia.

Tel : 603-7611 6899
Fax : 603-7611 6800

Parent company: USA
Membership: Associate

Becton Dickinson Sdn Bhd
www.bd.com.my

PRODUCT
Diagnosis Instrument for Influenza A & B

COMPANY NAME & ADDRESS
Unit 24, LG 5 (Executive Wing), Hotel Equatorial,
1 Jalan Bukit Jambul, 11900 Bayan Lepas,Penang.

Tel : +604 640 5688
Fax : +604 640 5686

Parent company: USA
Membership: Associate

Biocon Sdn Bhd
www.biocon.com

PRODUCT
Biopharmaceutical manufacturing

COMPANY NAME & ADDRESS
No.1 Jalan Bioteknologi 1, Kawasan Perindustrian SILC,
15 Bandar Puteri, Johor, 79200, Malaysia.

Tel: 607-560 0000
Fax: 607-560 0098

Parent company: India
Membership: Associate

CCB Medical Devices Sdn Bhd
www.ccb-medical.com

PRODUCT
Injection and blow moulded parts made from various polymer, silicon and rubber. Medical tube extrusion, Assembly services.

SERVICES
Contract manufacturing services from R&D, molding
and assembly.

COMPANY NAME & ADDRESS
CCB Medical Devices Sdn Bhd
PMT 1124, Jalan Perindustrian
Bukit Minyak 8
Taman Perindustrian Bukit Minyak
Simpang Ampat, Penang
14100 Malaysia

Tel : 604 5040198
Fax 604 5040908

Parent Company: Germany
Membership : Full

Integrated Plastic Kogyo (M) Sdn Bhd
http://www.ipk.com.my

PRODUCT
Single Use Safety Blood Lancet

COMPANY NAME & ADDRESS
Integrated Plastic Kogyo (M) Sdn Bhd
12, Jalan Teras 1,
Taman Industri Teras
Balakong
43300 Selangor, Malaysia
Tel: (03) 8961 6880
Fax : (03) 8961 9880

Website: www.ipk.com.my

Parent Company: Malaysia
Membership: Associate

Isofield Sdn Bhd
www.isofield.com

PRODUCT
Clean and sterile PPE

COMPANY NAME & ADDRESS
Isolfield Sdn Bhd
No. 6 Jalan Gudang 16/9, Seksyen 16
Shah Alam, Selangor, 40200
Malaysia

Telephone (012) 305-6895
Country of Origin: Ireland
Membership: Associate

Website www.isofield.com

Jabil Circuit Sdn Bhd
www.jabil.com

PRODUCT
Finished devices : Flu detector, Patient Bedside Monitor, Endoscope Reprocessor.
High Level Assembly : Thermal Cyclers (PCR), Sterilization.
PCBA : MRI, Ultrasound, Blood Analyzers, Oxygen Monitor, Cytometry and Hematology

COMPANY NAME & ADDRESS
Jabil Circuit Sdn. Bhd.
56 Hilir Sungai Keluang 1
Bayan Lepas Free Trade
Industrial Zone Phase 4
11900 Penang, Malaysia

Tel: (04) 6427975
Fax : (04) 6428001
Website www.jabil.com

Parent Company: United States
Type of membership: Full

Kobayashi Healthcare (Malaysia) Sdn Bhd
info-my@kobyashi.com

PRODUCT
Importer and Authorized Representatives – cooling gel sheets and heat patch

COMPANY NAME & ADDRESS

Kobayashi Healthcare (Malaysia) Sdn Bhd
50-2-2A, Level 2, Wisma UOA Damansara,
50, Jalan Dungun,
Damansara Heights
50490 Kuala Lumpur

Parent Company: Japan
Membership: Associate

Medtronic Malaysia Sdn Bhd
www.medtronic.com

PRODUCT
Medical Electronics Technology

COMPANY NAME & ADDRESS
B-23-1, The Ascent, Paradigm, No 1 Jalan SS7/26A, Kelana Jaya,
Petaling Jaya, Selangor, 47301, Malaysia

Tel : 603 -78838000
Fax : 603 – 78860474/4702

Parent company: USA
Membership: Associate

Nagoya Plastic Industry Sdn Bhd
http://www.nagoyaplastic.com

PRODUCT
Products: HME, Disposable Bronchoscopy etc.

Services Plastic Injection Moulding with Secondary Process
such as spray painting, printing and sub-assembly

COMPANY NAME & ADDRESS
Nagoya Plastic Industry Sdn. Bhd.
Lot 89, 90, 91, 1249, Jalan Aman 2,
Kawasan Perusahaan
Taman Makmur, Sungai Seluang
Lunas
Kedah, 09600 Malaysia

Tel: (+604) 4848434
Fax: (+604) 484461725

Website: www.nagoyaplastic.com

Parent Company: Malaysia
Type of membership: Associate

MIRA Medsource (Malaysia) Sdn Bhd
www.miramedsource.com

PRODUCT
Medical Device Sourcing for export to USA

COMPANY NAME & ADDRESS
35, 1st Floor, Jalan Todak 6,
Pusat Bandar Sunway Perdana,
13700 Seberang Jaya, Penang.

Tel: 604 383 8025
Hp: 6012 428 2311
Fax: 604 383 1845

Parent company: China
Membership: Associate

Parent Company: Malaysia
Type of membership: Associate

MULTIVAC SDN BHD

Lot 10-E, Pusat Teknologi Sunsuria, Jalan Teknologi,
Taman Sains Selangor, Kota Damansara,
47810 Petaling Jaya, Selangor Malaysia.

Tel : +603 61519885 / +603 61511885
Fax : +603 6143 6885

Parent company: Germany
Membership: Associate
Website: www.multivac.com

ABOUT US

For more than 60 years, MULTIVAC has been one of the leading manufacturers of packaging machines. Company headquarters – as well as the nucleus of the now global MULTIVAC Group – are located in Wolfertschwenden, Germany.

MULTIVAC has over 80 sites in more than 160 countries worldwide. Our globally operating group stands for diversity, performance, uncompromising quality and closeness to our customers. Close to 7,000 highly trained employees speak our customers’ languages, understand local challenges and always know what your success comes down to. They are all specialists in their areas and part of a strong network. 16 production sites, state-of-the-art Application Centers, best-in-class service and support, comprehensive advice and intelligent logistics ensure that all MULTIVAC solutions are successfully deployed worldwide.

Founded in 1961 in a small garage in Böhen and now firmly rooted in the idyllic German region of Allgäu, our group of companies has quickly developed into a global player and a trusted provider of integrated solutions. Our success worldwide enables us to leverage our expertise and opportunities to benefit our customers and stakeholders. Being privately owned right from the beginning, MULTIVAC stands for stability and entrepreneurial vision, top quality and creative ideas, fast solutions and long-term thinking, solid values and, of course, cutting-edge solutions. Today and in the future.

NIHON KOHDEN MALAYSIA SDN BHD

Suite 15-13,Level 15, G Tower,
199 Jalan Tun Razak
Kuala Lumpur
50400, Malaysia

Tel: (603) 21610100
Fax: (603) 21612520

Parent Company: Japan
Membership: Associate
Website: nihonkohden.com.my

ABOUT US

Nihon Kohden Corporation (Japan), a world-leading manufacturer of medical electronic equipment, founded in 1951.

Nihon Kohden Malaysia Sdn. Bhd. is a wholly-owned subsidiary of Nihon Kohden Singapore Pte Ltd, established in Kuala Lumpur to expand the Japanese medical device giant’s sales, service, and distribution network across the Asia-Pacific region.

Nihon Kohden Malaysia handles the distribution and servicing of key products, including patient monitors, defibrillators, and diagnostic equipment.

POLYPLAS SDN BHD

No 2056, Mukim 14,
Lorong IKS Bukit Minyak 5,
Taman IKS Bukit Minyak,
14000 Bukit Mertajam Penang
Tel: (04) 5070188
Fax: (04) 5078188

Parent Company: Malaysia
Membership: Full
Website: http://www.polyplassb.com/

ABOUT US

Polyplas Sdn Bhd was established in 1988. Since it’s humble beginnings, the Company has grown to become one of the leading manufacturers in the industry of plastic injection molding components in this region.

Committed towards greater expansion and growth, Polyplas adheres strictly to its corporate philosophy of constantly striving to provide a higher level of professionalism in reliability and service that meets or exceeds the performance and standards.

PRODELCON SDN BHD

78 Lintang Bayan Lepas 7,
Phase IV, Bayan Lepas
11900 Penang, Malaysia

Tel: 604-6438913
Fax: 604- 6438914

Parent Company: Malaysia
Membership: Associate
Website: http://www.psb.com.my

ABOUT US

Prodelcon Sdn Bhd was founded in 1985 by a group of engineers with the aim of meeting the increasing demand for precision moulds and dies in the semiconductor industry. Although precision tooling and automation remains one of her core businesses, Prodelcon has further extended its services to high volume precision machining and assembly for the Photonics, RF microwave and medical industries.

Over the years, Prodelcon has earned its reputation and high position in the precision tooling industry by continually improving its capabilities, processes, skills and investment in high end equipment. Our team are dedicated and driven in their mission to meet our customer’s highest expectations

Our high quality product delivery policy, commitment to intelligent partnerships, business integrity and customers’ satisfaction have made Prodelcon the leading supplier of precision components and engineering solutions in the region. Value added products, competitive prices and excellent customer service have propelled Prodelcon to the pinnacle of the precision mechanical industry.

PROFESSIONAL TOOLS & DIES SDN BHD

7118,Jalan Mak Mandin, Kawasan Perindusrian Mak Mandin,
13400 Butterworth, Penang, Malaysia.

Tel: 04-332 2335
Fax: 04-331 2337

Parent company: Malaysia
Membership: Associate
Website: www.professional-tools.com

ABOUT US
Professional Tools & Dies Sdn Bhd (PTD) is a Malaysian-based, vertically integrated manufacturing partner founded in 1990, specializing in mould fabrication, plastic injection molding, sheet metal stamping, and box-build assemblies. Based in Butterworth, Penang, with a 400,000-sq-ft facility, they serve global MNC clients in industries like automotive, medical, and electronics

PMA MANUFACTURING SDN BHD

No. 11, Lintang Beringin 2, Diamond Valley,
Georgetown Penang 11960 Malaysia.

Tel: 04-626 1518
Fax: 04-626 5253

Parent company: Malaysia
Membership: Associate
Website: https://pma-asia.com/

ABOUT US
PMA Manufacturing Sdn. Bhd. is a world leader in Cleanroom Labels, Specialty Labels, Shipping Labels, Tapes and Thermal Transfer Ribbons adhering to the manufactured to Clean Label Manufacturing protocol. We have developed and adopted advanced manufacturing technologies, specifically in the areas of critical surface particle removal, engineered label materials, adhesives, liners, printing and imaging.

PLASTIK STC SDN BHD

No 7 Jalan TSB 9, Taman Industri Sg Buloh,
Sungai Buloh, 47000 Selangor, Malaysia.

Tel: 03-6157 5313
Fax: 03-6157 5318

Parent company: Malaysia
Membership: Associate
Website: www.hlhightech.com

ABOUT US

Plastik STC Sdn Bhd is a Malaysian company specializing in plastic injection moulding solutions, with eight subsidiaries since 2010. The company operates primarily in Malaysia, with additional facilities in Thailand. Its mission is to focus on teamwork, high-quality products, timely delivery, and customer satisfaction. With a vision to further develop its global market position, Plastik STC aims to become a global leader in comprehensive plastics engineering solutions.

SILCOTECH INDUSTRY SDN BHD

No. A 153, Jalan 3,
Kawasan Perusahaan MIEL, Sungai Lalang Phase V
Sungai Petani
08000 Kedah
Malaysia

Telephone (604) 4419928
Fax (604) 4429928

Country of Origin: Malaysia
Membership: Associate
Website www.silcotechindustry.com

ABOUT US

Founded in 2006 and headquartered in Sungai Petani, Kedah, Silcotech Industry Sdn. Bhd. has grown from a vision into Malaysia’s leading precision rubber component manufacturer. What began as a commitment to outstanding management and world class manufacturing technology has evolved into a trusted partnership with clients across healthcare, automotive, electronics and consumer industries worldwide.

With our state of the art 60,000 square foot facility, we have built our reputation on research and development excellence, advanced tooling capabilities and sophisticated manufacturing technology. Our Class 8 and Class 9 cleanroom facilities and dual ISO certifications reflect our commitment to delivering high precision elastomeric solutions that are dust free, ultra clean and robust enough to meet the most demanding international standards.

SMITH & NEPHEW OPERATIONS SDN BHD

Plot P332, Persiaran Cassia Selatan 8
Taman Perindustrian Batu Kawan,
Mukim 13
14100 Penang, Malaysia

Tel: (04) 2023111
Fax (04) 2023111
Parent Company: United Kingdom
Membership: Full
Website: www.smith-nephew.com

ABOUT US

Smith & Nephew Malaysia, located in Batu Kawan, Penang, is a high-tech manufacturing facility established in 2022 to support the company’s orthopaedics and advanced wound management businesses in the Asia-Pacific region. As part of the British medical technology firm, the site manufactures orthopedic implants and supports global supply chains

TAKO ASTATIC TECHNOLOGY SDN BHD

Plant 1: No. 15 Jalan Kesuma 2/2, Bandar Tasik Kesuma, 43700 Beranang, Selangor, Malaysia.

Plant 2: No. 11 Jalan Kesuma 2/2, Bandar Tasik Kesuma, 43700 Beranang, Selangor, Malaysia.

Tel: (603) 87238843
Fax: (603) 87238844

Parent company: Malaysia
Membership: Associate
Website: www.takohealthcare.com.my

ABOUT US

Started in 1979, TAKO’s ESD products have gained wide market acceptance and popularity among the local semiconductors and related industries. Today, the new TAKO has grown to be one of the largest and most experienced ESD product manufacturers, with offices in Singapore, Malaysia, Thailand, Philippines, India and China and a very broad customer base overseas.

TAKO and group of companies are supported by a team of experienced ESD professionals internationally. We provide state-of-the art know-how and technologies in the design and manufacture of innovative & cost-effective ESD products for the purpose of combat against ESD in the electronics industry.

Our team members comprised of Ph. D holder in the Management of ESD, NARTE Certified ESD Engineer, ESD Practitioner and Consultants. Our team not only provide effective and productive ESD solution to improve your bottom-line profit, but also in a position to provide you with the world class ESD product know-how to allow you to leapfrog ahead of your competitors.

Today, TAKO has submitted thirty (30) ESD products patent applications with numerous granted patent protection. Some of the ESD products invented are being sold successfully throughout the ASEAN region, Europe, USA, etc.

Thus, being the local pioneer in developing the first cleanroom bag for the medical glove industry in Malaysia in the 1980s, TAKO currently hold numerous international patents in the field of electrostatic control and cleanroom packaging technology.

Over the past 30 years, TAKO has innovated numerous high technology packaging solutions including the development and the production of the Ultra-Clean Easy-Tear PE bags and the special cleanroom Easy-Peel PE bags.

TAKO clean medical packaging bags have gained wide recognition and acceptance in the medical packaging industries with its ISO: 9001 certified production facility.

TAKO has established its presence in Malaysia, Singapore, Indonesia, Thailand, China, Philippines, Hong Kong, India and other parts of the world.

TIP CORPORATION SDN BHD

Lot 2288, Jalan P4/8, Bandar Teknologi Kajang
Semenyih, Selangor, 43500
Malaysia

Telephone : ( 603) 872-37889
Fax : (603) 872-71889

Country of Origin: Malaysia
Membership: Associate
Website:https://www.tipcorp.com/

ABOUT US

Tip Corporation Sdn Bhd is an ISO9001 & ISO14001 certified manufacturer of Ultra-Clean flexible packaging products for the Cleanrooms, Electronics & Semiconductors and Medical industries. We are strategically located in Malaysia, the center of high-technology manufacturing in Asia.

Since its establishment in 1989, we have been supplying our quality products to some of the most critical industries including hard disk drive media, aerospace, wafer fabrication, electronics & surgical equipment manufacturers. Our production facilities include Class 100 Certified Cleanrooms and state-of-the-art machineries such as blown film extrusion, extrusion lamination, rotogravure & flexographic printing and bag converting.

V3 BIO SDN BHD

No 18, Jalan Cassia Selatan 3/1,
Taman Perindustrian Batu Kawan
Bandar Cassia
14100 Pulau Pinang
Malaysia

Telephone: (604) 5886993
Fax: (604) 5886993

Country of Origin: Malaysia
Membership: Associate
Website www.v3bio.com

ABOUT US

V3bio Sdn. Bhd was established on sole premises to develop innovative manufacturing technology that focuses on stabilized advanced wound management and infection control products. Its core competency is on innovation, development, and manufacturing.

Situated strategically in the Batu Kawan Industrial Park in Penang, V3bio manufacturing facility is equipped with state-of-the-art ISO Class cleanroom and managed by a group of dedicated and experienced team with sound capabilities in manufacturing technology.

WP Popups

Add you text in here

JOHNSON & JOHNSON SDN BHD
(Medical Division)

Level 8, The Pinnacle, Persiaran Lagoon,
Bandar Sunway, 46150, Petaling Jaya,
Selangor, Malaysia.

Tel: 03-7661 4615
Fax: 03-7610 0519

Parent company: USA
Membership: Full
Website: www.jnj.com

ABOUT US

Johnson & Johnson Sdn Bhd is a fully owned subsidiary of Johnson & Johnson, Inc US. Johnson & Johnson Sdn Bhd has a rich history with over 63 years in Malaysia, since incorporated in 1960, with the presence of all Johnson & Johnson’s business segments in Pharmaceutical, Medical Devices and Vision Care.

The Medical Devices segment, under J&J’s MedTech, includes a broad range of products used in the orthopedics, surgical care, specialty surgery and cardiovascular care. Ethicon, a leader in advance medical devices division of Johnson & Johnson, is the clear leader within the Advanced Surgical Device segment in Malaysia. Ethicon leads in surgical devices sub-segments for Sutures, Energy, Staplers and Hemostat. DePuy Synthes is the market leader in Orthopedics in Malaysia, leads in trauma, joint reconstruction, spine care solution and neurological solutions

Sanichem Resources Sdn Bhd
www.sanichem.my

PRODUCT
(1) Analytical testing (ETO RESIDUAL) on medical devices,
(2) Microbiology testing (sterility, bioburden, BnFetc) on medical devices
(3) Water quality testing.

COMPANY NAME & ADDRESS
Sanichem Resources Sdn Bhd
N0 7 & 7A, Jalan Timur 6/1A,
Mercato @ Enstek
Bandar Baru Enstek, Negeri Sembilan
71760 Malaysia
Tel: 606- 7947606
Fax: 606-7947607

Country of Origin: Malaysia
Membership: Associate

Dexcom (Malaysia) Sdn Bhd
www.dexcom.com

PRODUCTS
Manufactures, produces and distributes continuous glucose monitoring systems for diabetes management

COMPANY NAME & ADDRESS
Dexcom Malaysia Sdn Bhd
PMT775, Persiaran Cassia Selatan 4,
Simpang Ampat
14100 Penang

Tel: (604) 5631700

Country of Origin: USA
Membership: Associate

JLL Malaysia Sdn Bhd

PRODUCT
Medical device for test and treatment of arrhythmia

COMPANY NAME & ADDRESS
JLL Malaysia Sdn Bhd
PMT 1224 Jaln PSPN 3, Penang Science Park North,
Simpang Ampat, 14100 Penang

Tel: (+604) 518 7777

Country of Origin: Japan
Membership: Full

Andy Lee Kuan Min

AMMI Chairman / Director Government Affairs & Board of J&J Msia

Andy joined Johnson & Johnson in 2015 and leads the Government Affairs & Policy function for J&J’s total enterprise in Malaysia & Singapore.

Andy is a member of the J&J Malaysia’s Country Management Board and actively represent J&J, in lead positions, in various trade associations including in Association of Malaysian Medical Industries; Pharmaceutical Association of Malaysia and American Malaysian Chamber of Commerce.

He has over 19 years of Government & Public Affairs experience in various industry including Medical Device, Pharmaceutical and FMCG businesses, particularly, in the field of industry policy issues management and advocacy strategies in shaping the operating environment. Prior to joining J&J, Andy held various Government & Corporate Affairs positions in numerous multi-national corporations including Sanofi and Merck Sharp & Dohme.

Dato’ Loo Lee Lian

Chief Executive Officer of InvestPenang

Dato’ Loo Lee Lian is the Chief Executive Officer of InvestPenang, the principal investment promotion agency and wholly owned company of the state of Penang. It is the leading point of contact for investment attraction, facilitation and support for foreign and local businesses.

She came into her position in 2010 backed by 25 years of industry background in the various sectors of the manufacturing industry. She is responsible for identifying new areas of growth and strategizing the state’s investment and industrial policies. Underpinned by the state and InvestPenang’s achievements, the sustained performances of the manufacturing and services sectors have elevated Penang’s per capita income and maintained the state’s status as an economic powerhouse of Malaysia.

Dato Loo has led companies in strategic planning, project management, operations, business development, supply chain management, customer strategies, and international business migration. Her invaluable experience has made her a highly sought-after guest speaker at multiple corporate conferences and also community seminars focusing on job diversity, women empowerment and youth education programs.

Dato Loo holds concurrent appointments as a Director in Penang STEM, member of the Selection Committee of the Penang Future Foundation, Penang State Government’s scholarship program for university undergraduate studies, and is the Chairperson of the Penang i4.0 Seed Fund Evaluation Committee.

Born and bred in Penang, Dato Loo graduated with Bachelor of Economics from the University of Adelaide, South Australia, and received her MBA from the University of South Australia.

YAB Tuan Chow Kon Yeow
Chief Minister of Penang

YAB Tuan Chow Kon Yeow is Penang’s fifth Chief Minister. He assumed the State’s top leadership role after Pakatan Harapan’s thumping victory in Malaysia’s 14th General Elections in May 2018. He has also been a Penang State Executive Councilor since 2008.

He has been the DAP Penang State Chairman since 2000 and DAP National Vice-Chairman since 2004.

In a recent interview after his swearing-in, the fifth Chief Minister of Penang reiterated his administration’s commitment to ensure delivery of three mega projects, namely the Penang Transport Master Plan, flood mitigation and affordable housing. Undaunted by the higher expectations, he takes this as a challenge to serve Penangites and find ways to make this state, a better home for all.

Besides that, YAB Tuan Chow also aims to transform Penang into ‘A Family-Focused Green and Smart State that Inspires the Nation’ with the Penang2030 Vision and this is the current focus of the State Government.

Mr Samuel Pooranakaran

Vice-President – Manufacturing, Malaysia

Samuel has over 25 years of experience in consumer electronic, implantable medical device manufacturing & logistics operations. Graduating from RMIT University, Australia, Samuel joined Seagate Singapore in 1994 and took up various roles across South East Asia.

In 2007, Samuel moved to Sydney and joined Cochlear. Here, he continued embracing opportunities and new challenges culminating in his final Sydney-based role as the Head of Manufacturing Engineering.

Subsequently, in 2016 Samuel moved to Malaysia to build the manufacturing & global logistics facility from scratch to support Cochlear’s growing global demand. Currently, he is responsible for manufacturing & logistics operations as a Vice President of Malaysian operations.

Mr Amirul Haqiem

Product Marketing Manager, Asia-Pacific
Oliver Healthcare Packaging

Amirul leads the product commercialization across the Asia-Pacific region at Oliver Healthcare Packaging. Into his sixth year with Oliver, Amirul brings a strong foundation in medical packaging, having started in technical services and played a key role in establishing Oliver’s R&D Technical Center in Singapore.

His experience includes medical packaging design and conceptualization, R&D, material testing, and troubleshooting. In his current role, Amirul manages the regional product portfolio, aligning global offerings with Asia-Pacific market needs. He works cross-functionally to drive product education, strategic planning, and sustainability initiatives, guided by market insights and competitive analysis.

He holds a BSc (Hons) in Biomedical Engineering from the Singapore University of Social Sciences

Mr HT Eow

Managing Director, Abbott Penang

Mr HT Eow has been the Managing Director for Abbott Penang (St Jude Medical Operations Sdn Bhd) since July 2015. Prior to that, he spent 6 years with B.Braun Medical Industries Sdn Bhd as Vice-President (2012–2015) and General Manager (2009 -2012) for Medical Plant. Mr Eow was also attached to Intel Tech Sdn Bhd for 16 years before moving to the medical device industry.

Mr Eow holds a Bachelor of Science in Industrial Engineering from Universiti Teknologi Malaysia.

ASTRONDX TECHNOLOGIES SDN BHD (Formerly known as ADT Biotech Sdn.Bhd.)

307, Block B, Phileo Damansara 1, 9 Jalan 16/11,
Petaling Jaya, Selangor, Malaysia., 46350

Tel: (03) 793-16760

Country of Origin: Malaysia
Membership: Associate
Website: https://astrondx.com/

ABOUT US

AstronDX Technologies Sdn Bhd is an ISO 13485 certified manufacturer of in vitro diagnostic tests and nucleic acid extraction reagents with a focus on the development of innovative and accessible solutions for the detection, typing and monitoring of emerging and tropical diseases.

AstronDX is based in the heart of the South-East Asian tropics, with its premises in Petaling Jaya, Malaysia, just outside Kuala Lumpur.

OPULENT SOLUTIONS SDN BHD

Plot III Bayan Lepas Industrial Park,
Lebuh Raya Kampung Jawa
Bayan Lepas, Pulau Pinang, 11900

Tel: (604) 640-8698

Country of Origin: Singapore
Membership: Full
Website: www.opulent-group.com

ABOUT US
Opulent, a trusted contract manufacturer for the medical and health-tech industry, excels in complex manufacturing with simplified solutions. We turn our clients’ visions into vivid product by customizing solutions tailoring to one need, covering design, engineering, manufacturing, and validation. Our versatility brings visions to life, applying Design for Excellence (DFX), rooted in six key categories which are Manufacturing, Reliability, Cost, Performance, Sustainability, Human Factors. We strictly adhere to ISO regulations such as ISO 9001, ISO 140001, ISO 13485, FDA-approved premises, and industry guidelines, ensuring the highest quality and sustainable innovations in our services.

OLIVER™ HEALTHCARE PACKAGING MALAYSIA SDN BHD

No. 15, Jalan Persiaran Bioteknologi,
Kawasan Perindustrian SILC,
79200 Iskandar Puteri, Johor,
Malaysia

Tel: +65 6232 4001

Country of Origin: USA
Membership: Full
Website: www.oliverhcp.com

ABOUT US

Oliver Healthcare Packaging is a leading supplier of sterile barrier packaging solutions for the global healthcare market. Headquartered in suburban Philadelphia, PA, Oliver has manufacturing and technical facilities around the world including Anaheim, CA; Feasterville, PA; Galway, Ireland; Grand Rapids, MI; Hamilton, OH; New Britain, PA; Singapore; Suzhou, China; and Venray, the Netherlands. In addition, new state-of-the-art manufacturing facilities are being constructed in Malaysia (2024) and planned for Costa Rica (2025).

MENICON MALAYSIA SDN BHD

No.2, Jalan Hi-Tech 16, Zon Industri Fasa 4,
Kulim Hi-Tech Park,
Kulim, 09090 Kedah

Tel: (04) 4089545

Country of Origin: Japan
Membership: Full
Website: www.menicon.my

ABOUT US

Menicon developed the first commercialized corneal contact lenses in Japan. Since then, we have been industry leaders as “pioneer in contact lens production” for many years. We will continue to develop safe and high-quality products and are also determined to undertake challenges in healthcare and lifecare in addition to our vision care business, which mainly deals with contact lenses.

Through sustainability-oriented management, we aim to address various social issues to realize a sustainable society.

KHTP Sterilisation Services Sdn Bhd

Lot 33, Jalan Hi-tech 4,
Kulim Hi-Tech Park,
Kulim, 09090 Kedah

Tel: 04-403 2131

Country of Origin: Malaysia
Membership: Associate
Website: www.khtp.com.my

ABOUT US
KHTP Sterilisation Services Sdn Bhd (KSS) offer sterilizing services using ethylene oxide gas for medical industry needs. We monitor validation cycles closely using process challenge devices (PCD) and biological indicators (BIs) for your specific product monitoring routine production. KSS ensures the bioburden testing and Ethylene Oxide (EO) residuals analysis is completed to demonstrate the safety of products sterilized by EO by determining compliance with accepted residual limits for the products intended use.

AFA PAC SDN BHD

No. 3, Jalan TTC 7,
Taman Teknologi Cheng,
Kawasan Perindustrian Cheng,
75250 Melaka,
Malaysia.

Tel: (06) 3363518

Country of Origin: Malaysia
Membership: Associate
Website: www.afa-tech.com

ABOUT US
AFA Group, with 28 years of expertise, excels in innovative solutions for glove, medical testing, and robotics. Specializing in Gloves, Medical Devices, Pharmaceutical & FMCG Industries since 1995, we are the preferred packing supplier for local and international manufacturers in the medical gloves sector.

Diversifying into medical devices, pharmaceuticals, and FMCG, AFA Group pioneers Industry 4.0 with advanced automated end of line packaging solutions. Committed to sustainability, we integrate AI, cutting-edge R&D, and diverse automation modules.

Knowles Electronics (M) Sdn Bhd

Plot 104, Lebuhraya Kampung Jawa
Bayan Lepas Industrial Estate
Bayan Lepas
11900 Penang

Tel: 604-6147466

Country of Origin: Malaysia
Membership: Associate
Website: www.knowles.com

ABOUT US

Knowles has been the Premier Global Design, Development, and Scalable Manufacturing Partner of Miniaturized Medtech Solutions for over 75 years. Knowles capabilities continue to push the limitations of Miniaturized Precision Metal Stampings, Micro Molded Components, Electromagnetic Coil Windings, Micro PCBAs, Fine Wire Cables and Miniaturized Assembly Solutions.

Knowles Global’s footprint includes over 7,000 employees across 13 countries. Since 1979, Knowles has been committed to a strong manufacturing presence in Malaysia, China, and the Philippines. In 2017, Knowles celebrated our 10 billionth unit shipped

Ms Ong Yee Ting

Communications Specialist | ESG Pillar Lead, Boston Scientific Penang

Yee Ting is a seasoned communications specialist with over a decade of experience in corporate communications. Known for her passion in CSR, she now leads the ESG pillar at Boston Scientific in Penang, where she plays a key role in coordinating cross-functional efforts to drive ESG initiatives. Her work focuses on using ESG as an engagement platform to bring teams together and create meaningful impact through sustainability initiatives.

.

Mr Thierry Wagner

Global Director Regulatory & Standards, DuPont Tyvek Healthcare Packaging
DuPont Water & Protection

Thierry Wagner has spent over 37 years working for DuPont and currently as Global Director, Regulatory & Standards – DuPont Healthcare Packaging located in Luxembourg. He is convenor of ISO/TC 198/WG7 “Sterilization of Health Care Products—Packaging” and of CEN/ TC 102/WG4 “Sterilizers and associated equipment for processing of medical devices – Packaging”, past chairman of the Sterile Barrier Association (SBA), currently SBA director and regulatory committee chair.

Thierry is also a member of the CEN-CENELEC Healthcare Sector Forum and actively engaged in the IHI ENKORE Eco Healthcare Project with the objective to drive the future of sustainability in healthcare.

Thierry published 2 book chapters on healthcare packaging and is a regular speaker at evenst and conferences on medical and pharmaceutical packaging.

Ms Marinela Cebic

VP Global Regulatory Affairs & Quality Assurance

With a passion for developing solutions-focused teams, Marinela is responsible for leading quality and regulatory excellence for SteriPack and advancing our corresponding compliance strategies. She’s also the chair of our Environmental and Social Governance steering committee.

Marinela has 2 Master’s Degrees – one in Law, and another in Healthcare Administration. She has previously held director positions at Synergy Health and Steris.

Dr Brian McEvoy

Chief Technology Officer
STERIS Applied Sterilization Technologies

Dr. Brian McEvoy is Chief Technology Officer at STERIS AST with responsibilities for technology leadership, strategy development & deployment, across sterilization technology platforms, both gaseous (Ethylene Oxide and Vaporized Hydrogen Peroxide) and radiation (Electron Beam, Gamma and Xray radiation). With over twenty years in the healthcare sterilization industry, and core competences in sterilization technology and sterility assurance, Brian’s current technical role involves supporting STERIS AST and its Customers with the supply of sterile medical devices to critical healthcare applications.

Brian has a passion for educational and personal development with a PhD in Microbiology and an MBA and numerous publications in the field of sterilization. A recognized industry expert and a national expert on CEN and ISO standards committees and is the inaugural recipient of the AAMI 2024 Sterilization Science Award. Co-chair of
Kilmer Modalities Collaboration group. Program Committee Member of Kilmer* Conference 2016, 2019, 2022 and 2025 and Program Chair for the International Meeting on Radiation Processing 2024.

SILICONPRO LAB SDN BHD

Lot. 1910, Jalan Kawasan Perindustrian Balakong 7
Kawasan Perindustrian Kg Baru Balakong
Seri Kembangan
43300, Selangor

Tel: (03) 89626252

Country of Origin: Malaysia
Membership: Associate
Website: www.siliconprolab.com

ABOUT US
Founded in 2011, Siliconpro Lab, a distinguished Malaysian manufacturer, specializes in crafting high-quality silicone and plastic products. Committed to advancing community health, the company employs innovative, streamlined approaches for swift, tailored solutions.

With 60% of its products comprising medical components, Siliconpro Lab not only supplies domestically but exports to various countries, including the US. Offering comprehensive manufacturing solutions, the company simplifies the supply chain, reducing lead times from concept to efficient distribution. Functioning as a onestop center, Siliconpro Lab boasts diverse business units, a range of machinery, and a steadfast commitment to quality control, reflecting excellence in global product development and delivery.

MY CO2 (PG) SDN BHD

16, Lengkok Kikik 1
Taman Inderawasih, Prai
13600 Penang

Tel: (04) 380 8282

Country of Origin: Malaysia
Membership: Associate
Website: www.myco2.com.my

ABOUT US
Established in 2006, from a lab size of not more than 800 sq ft, we have grown to a size of 25,000 sq ft space. Our 3 state-of-the art “green” labs strategically located in Penang, Shah Alam and Johor Bahru.

We have accumulated more than 800 accredidate tests covering 18 categories, and we are No.6 among Malaysia’s Top 50 Enterprises in 2013. Our tests, analysis & laboratory specifications adheres to both local and international standards. Also accredited under ISO / IEC 17025 by Department of Standards Malaysia (SAMM No. 384 & 564), and recognized by the International Laboratory Accreditation Coorperation (ILAC).

KHTP BIO-ANALYTICAL LABORATORY SDN BHD

Ground Floor, KTechno Centre
Kulim Hi Tech Park
09090 Kulim Kedah

Tel: 604-6147466

Country of Origin: Malaysia
Membership: Associate
Website: https://www.kbio.com.my/

ABOUT US

KHTP Bio Analytical Laboratory Sdn. Bhd. (KBio) is an ISO/IEC 17025-accredited subsidiary of Kulim Technology Park Corporation, providing specialized testing and analytical services within the Kulim Hi-Tech Park, Kedah. They focus on biotechnology, environmental monitoring, medical device sterility validation, and chemical testing for industries

SCHNEIDER ELECTRIC INDUSTRIES (M) SDN BHD

Level 19, Tower B, Plaza 33
No 1 Jalan Kemajuan, Seksyen 13
Petaling Jaya 46200 Selangor

Country of Origin: USA
Membership: Associate
Website: https://www.se.com/my/en/

ABOUT US

Schneider Electric is a global energy technology leader, driving efficiency and sustainability by electrifying, automating, and digitalising industries, businesses, and homes.

Our technologies enable buildings, data centres, factories, infrastructure, and grids to operate as open, interconnected ecosystems, enhancing performance, resilience, and sustainability. Our portfolio includes intelligent devices, software-defined architectures, AI-powered systems, digital services, and expert advisory.

With 160,000 employees and one million partners in over 100 countries, Schneider Electric is consistently ranked amongst the world’s most sustainable companies.

GRAND TEN HOLDINGS SDN BHD

Plot PT5754, Jalan 2, Kawasan Perusahaan Bandar Baru Salak Tinggi, Sepang, 43900 Selangor, Malaysia
Tel: 603-8705 5995

Country of Origin: Malaysia
Membership: Full
Website: https://www.grandten.com.my/

ABOUT US

Grand Ten offers top-tier sterilization services across diverse industries using gamma irradiation, a proven safe and highly effective method.

We specialize in sterilizing medical devices, surgical implants, kits, and more, ensuring the integrity, efficiency, safety, and quality of every irradiated product. Situated strategically in Selangor, our location provides convenient access and proximity to Port Klang, the busiest trans-shipment port in the region, and just a half-hour away from Kuala Lumpur International Airport

DKSH MALAYSIA SDN BHD

B-11-01, The Ascent, Paradigm,
No.1, Jalan SS7/26A, Kelana Jaya,
47301 Petaling Jaya, Selangor Darul Ehsan

Country of Origin: Switzerland
Membership: Associate
Website: https://www.dksh.com/my-en/home

ABOUT US

DKSH is a leading Swiss-based Market Expansion Services provider, specializing in helping companies grow their business in Asia and beyond. With over 150 years of experience, they provide comprehensive services—marketing, sales, logistics, and distribution—across Consumer Goods, Healthcare, Performance Materials, and Technology industries. The company provides end-to-end “capillary” distribution and business development service

EUREMED SDN BHD

125, Jalan Ekoperniagaan 4, Eco Business Park II,
Senai, 81400 Johor

Country of Origin: Malaysia
Membership: Associate
Website: https://euremed.com/

ABOUT US

Euremed Malaysia (EureMED Sdn Bhd) is a specialized medical device contract manufacturer based in Johor Bahru, Malaysia.

They excel in producing highly precise medical components using advanced extrusion and molding methods. Their product range includes medical tubing, catheters, and drug delivery systems, all manufactured to meet stringent quality standards.

Euremed is committed to empowering medical solutions with their state-of-the-art facilities and robust quality control systems. They hold ISO 13485:2016 certification and maintain cleanroom environments certified to ISO 14644 Class 1K & 10K standards to ensure the highest levels of manufacturing quality and sterility.

INSULET MALAYSIA SDN BHD

No 5 Jalan Persiaran Bioteknologi
Kawasan Perindustrian SILC
Iskandar Puteri, 79200 Johor

Country of Origin: USA
Membership: Associate
Website: https://www.insulet.com/

ABOUT US

In August 2024, US-based Insulet Corp officially opened a 400,000
square-foot manufacturing facility in Johor Bahru. This new facility is
twice the size of its highly automated plant in Acton, Massachusetts,
where the company is headquartered.

Strategically positioned to meet the growing demand for Insulet’s Omnipod® 5, the first and only tubeless automated insulin delivery system in the US, the facility currently employs over 350 staff.

It is projected to expand to over 1,000 employees in the coming years, as part of Insulet’s USD200 million (RM889.59 million) investment plan in Johor.

SMOOTHBOR PLASTICS MALAYSIA SDN BHD

No 8, Jalan I-Park SAC 2,
Taman Perindustrian I-Park SAC,
Senai, 81400 Johor

Country of Origin: USA
Membership: Full
Website: https://www.smoothborplastics.com/

ABOUT US
Founded in 1971, Smooth-Bor Plastics is a leading innovator of plastic corrugated hose and tubing. Smooth-Bor® was a leading innovator of an all-plastic tube with a smooth inner bore to promote laminar flow. Today we maintain an intellectual property portfolio of patents and trademarks in the United States and around the world, proving our
commitment to continual research and development.

We specialize in custom solutions for our customers and work diligently to provide product to suit their specific needs.

SPECTRUM (KELPAC MEDICAL SDN BHD)

No. 10, Jalan Laman Setia 7/3,
Setia Business Park
Gelang Patah, 81550 Johor

Country of Origin: USA
Membership: Full
Website: http://www.spectrumplastics.com/

ABOUT US

Spectrum Plastics Group, a DuPont Business, is a global leader in the design and manufacture of specialty medical devices and components. Following its acquisition by DuPont in August 2023, it has become a cornerstone of DuPont’s healthcare offerings, particularly in high-growth therapeutic areas.

In Malaysia, Spectrum Plastics Group maintains a significant manufacturing presence (notably in Johor), supporting the country’s position as a regional MedTech hub.

ROCHE DIAGNOSTICS MALAYSIA SDN BHD

B-20-1, Level 20, The Ascent,
Paradigm, No. 1, Jalan SS7/26A
Petaling Jaya
47301 Selangor

Country of Origin: Switzerland
Membership: Full
Website: https://www.roche.com.my/

ABOUT US

Roche Diagnostics Malaysia Sdn. Bhd. is a leading provider of in-vitro diagnostics tests and systems that enable patients and doctors to make the right decisions on the patient’s health and well-being. With offices in every major city in Malaysia, Roche Diagnostics Malaysia is committed to improve life and serves customers spanning the entire healthcare spectrum – from hospitals and private commercial laboratories, to physicians and to patients with conditions requiring them to self-test.

As a leader in innovative diagnostics tests, Roche Diagnostics Malaysia specializes in a broad spectrum of diagnostics areas such as clinical chemistry and immunoassays, molecular diagnostics, tissue diagnostics, point-of-care diagnostics, laboratory automation & IT and solutions for life science and diabetes care.

In Roche, we envision our employees as our main and integral focus of the organization and we encourage everyone to be better versions of ourselves.

LGI TECHNOLOGY PENANG SDN BHD

No 6, 8 & 10, Lorong Mak Mandin 5/8
Kawasan Perindustrian Mak Mandin
Butterworth, 13400 Penang

Country of Origin: USA
Membership: Associate
Website: www.cleanmarklabels.com

ABOUT US

LGI Technology Penang Sdn Bhd, based in Butterworth, Penang, is a specialized label engineering and manufacturing company producing high-performance labels for cleanrooms, cryogenic storage, and harsh industrial environments. As part of LG International Inc. founded in 1978 in the Pacific Northwest, the company draws on strong expertise in material science and print technology to support industries such as pharmaceutical, medical, and electronics.

Its capabilities include particle-free and low-outgassing label materials, cryogenic-resistant adhesives, and labels with built-in sterile indicators for gamma, autoclave steam, or heat exposure, serving customers across the region and globally.

LANCO INTEGRATED (MALAYSIA) SDN BHD

ADDRESS
PT 5887, Jalan Cassia Selatan 3/8
Taman Perindustrian Batu Kawan
Simpang Ampat
14100 Penang

Country of Origin: USA
Membership: Associate
Website: https://lancointegrated.com/

WHAT WE DO

Lanco Integrated Malaysia, located in Batu Kawan Industrial Park, Penang, is part of a U.S.-based precision engineering and automation company with roots in Lanco Assembly Systems, founded in 1990.

The company delivers advanced automated assembly and test solutions, with a strong focus on the medical device industry where precision, reliability, and compliance are critical. It also serves the automotive and electronics sectors with customized turnkey systems that enhance manufacturing efficiency and product quality.

Lanco emphasizes innovation from early concept development through Design for Automation (DFA), followed by engineering, system integration, and performance optimization. Its commitment extends beyond delivery, providing ongoing technical support and lifecycle value to customers.

MUN GLOBAL SDN BHD

Lot 26, Jalan Perusahaan 1,
Amari Business Park,
Kawasan Perindustrian Batu Caves,
Batu Caves, Selangor, 68100

Tel: (03) 617-76488

Country of Origin: Malaysia
Membership: Associate
Website: https://munglobal.com

ABOUT US

MUN Global Sdn Bhd is a Malaysia-headquartered global platform for premium healthcare and personal protective products, operating as part of the Hartalega Holdings Berhad group. The company serves customers in over 30 countries worldwide across healthcare, medical, industrial, and consumer sectors. Originating in the late 1990s as a glove-focused business, MUN Global has evolved into a comprehensive healthcare brand platform offering a diversified portfolio.

This includes high quality and innovative nitrile and latex gloves under the GloveON™ brand, alongside facial and respiratory protection, protective apparel, antimicrobial solutions, and hand-care products.

Driven by a commitment to quality, innovation, and sustainability, MUN Global delivers solutions that prioritise safety, reliability, and environmental responsibility, supporting better outcomes for professionals and communities globally.

HARLEIGH (MALAYSIA) SDN BHD

No. 4 Jalan Tahana, Tampoi Industrial Estate
Johor Bahru
80350 Johor

Tel: (07) 2361263
Country of Origin: Malaysia
Membership: Associate
Website: www.shin-nippon.com.my

ABOUT US

Harleigh (Malaysia) Sdn Bhd is a Johor Bahru–based manufacturer of medical and healthcare packaging solutions, established in 1987, with warehouse support in Ipoh. The company specializes in secondary packaging for the medical device, pharmaceutical, and healthcare sectors, including folding cartons, rigid boxes, and IFU/DFU booklets and leaflets.

As part of Asahi Printing Co., Ltd., Harleigh supports multinational MedTech companies with packaging that meets regulatory requirements, complies with global quality standards, and is suitable for customers’ cleanroom environments. A new smart packaging facility is scheduled for Q3 2026 to enhance capacity and efficiency. The company operates under ISO 9001 and ISO 14001 and is progressing towards ISO 13485 certification.

Mr Frederic Rebetez

Managing Director and Site Leader, Smith & Nephew

Frederic Rebetez is the Managing Director & Site Leader for Smith & Nephew’s new greenfield manufacturing site in Penang, Malaysia. Fred oversees all Malaysian operations from manufacturing and distribution of Orthopedics products around the globe.
He is an expert in driving Operational Excellence and pioneering initiatives like the greenfield projects, significant enhancements to Quality Management Systems, and the successful registration of new sites for prominent certifications such as ISO 13485 & MDSAP.

He also has experience ranging from reshaping Quality Management Systems, successfully navigating FDA inspections, championing new product introductions to integrating Lean Manufacturing and Six Sigma methodologies for optimized operations.
His academic pursuits are complemented by an EMBA in Management of Technology from EPFL Lausanne, certifications in Lean Manufacturing and Six Sigma from Johnson & Johnson, and a Master’s Degree in electronics engineering.

He is also recognized for his leadership dynamism, analytical acumen, and an unwavering commitment to enhancing product safety and operational excellence. He has strong partnerships, managing cross-functional teams, and his leadership ethos is rooted in fostering engagement and continuous improvement.

Fred relocated from Switzerland to Penang with his wife, Amanda.

Ms Tan Lin Im

Senior APAC Regional HR Director

Tan Lin Im is the APAC Senior HR Director at Teleflex Medical, bringing 28 years of HR professional experience, including 21 years in the electronics industry before transitioning into the medical sector.

A certified ICF coach, she is passionate about people and organizational development, and also serves as the Talent Development Subteam Co-Lead under the Association of Malaysian Medical Industries (AMMI) and Committee member in MyMahir Council for the Medical Industry under TalentCorp.

Mr. Samuel Pooranakaran

Vice-President, Manufacturing and Logistics Operations, Cochlear Malaysia Sdn Bhd

Samuel Pooranakaran is a senior manufacturing and supply chain executive with over 28 years of experience spanning consumer electronics and implantable medical device industries. He holds Bachelor of Science and Bachelor of Engineering degrees from RMIT University, Australia.

He began his career with Seagate Singapore in 1994, where he held multiple leadership roles across Southeast Asia, developing deep expertise in high-volume manufacturing, operational excellence, and regional operations management.

In 2007, Samuel joined Cochlear Limited in Sydney, Australia, where he progressed through a series of senior leadership positions, culminating in his role as Head of Manufacturing Engineering. In this capacity, he played a key role in advancing manufacturing capabilities within a highly regulated, Class III medical device environment. In 2016, he was appointed to lead the establishment of Cochlear’s Malaysia manufacturing and logistics operations, successfully delivering a greenfield facility that now serves as a critical hub in the company’s global supply network.

Samuel currently serves as Vice President, Manufacturing & Logistics Operations (Malaysia), with full accountability for operational performance.

Mr JC Guillou

Global VP, Operations and Sourcing, Gloves, Molnlycke Healthcare

Jean-Christophe, “JC”, has 25-year experience in Industrial Operations mostly in Pharmaceuticals and Medical Devices. He holds an MBA and a Msc of Industrial Operations from Kedge in Bordeaux France.

JC spent the first 15 years of his career with Sanofi, in London, Paris, Sydney and Singapore ending his tenure as Regional Supply Chain Director APAC. He then ventured in entrepreneurship and founded a wine import company in Singapore. Three years later he moved to Hangzhou for 2 years with Robert Bosch to head the APAC Industrial and Supply Chain Strategy. In 2012 he joined Menarini, back in the Pharmaceutical industry for eight years based in Singapore as Vice President APAC Operations and Director of the board of PT Menarini Indria in Jakarta.

In 2020, JC joined Mölnlycke to head the Global Operations of the Gloves Division. He is based in Penang where he is in charge of 2500 people in 3 manufacturing sites as well as the Global Procurement and Supply Chain. He is also the General Manager and Director at the Board of Molnlycke Health Care Sdn Bhd.

Dr Ng Tian Wei

Regional Research & Development Manager
Amcor Flexibles Asia Pacific

Dr. Ng TianWei is a seasoned professional with over two decades of
experience in the flexible packaging industry. He holds both a Bachelor’s degree in Chemical Engineering and a PhD in Mechanical Engineering from Michigan Technological University, USA. His extensive career has been marked by significant contributions to research and development for Amcor Flexibles Asia Pacific.

As a Regional R&D Manager of Amcor Flexibles Asia Pacific, Dr. Ng has played a pivotal role in driving projects focused on healthcare and sustainability, reflecting his commitment to innovation and excellence in the industry.

Ms Tatiana Dias

Global Sustainability and Regulatory Program Manager

Tatiana Dias joined DuPont in 2023 and serves as Global Sustainability and Regulatory Program Manager for Tyvek® Healthcare Packaging. She holds a PhD in Sustainable Chemistry from the University of Nottingham, UK. Tatiana is actively involved in international standardisation initiatives on packaging and sterilisation through ISO and CEN committees.

She collaborates with leading industry associations to advance packaging circularity and contributes to the IHI ENKORE project, promoting sustainability in healthcare. Her current work focuses on developing sustainable plastic materials for packaging.

Her industry career began at MedTech Europe in Regulatory Affairs, initially focused on medical devices. She later transitioned to Sustainability and Environmental initiatives, and in 2022, she expanded her scope by managing committees at the Sterile Barrier Association before joining DuPont.

Mr. Graham Rice

Vice-President Sustainability,
B. Braun Medical Industries

Graham has made Malaysia his home for over 27 years. Born in the Middle East and raised in the UK, he brings a diverse background to his professional journey.

With extensive experience in procurement and sustainability roles across the Asia Pacific region, Graham has worked in various sectors, including Electrical & Electronics, Consultancy, and Pharmaceuticals, before venturing into Medical Technology.

Graham joined B. Braun in 2015 as Vice President and Head of Procurement for the Asia Pacific region. In addition to this role, he has been instrumental in advancing sustainability initiatives within the company.

In 2024, Graham transitioned to a newly established position as Vice President of Sustainability for B. Braun in Asia Pacific. In this role, he is dedicated to implementing sustainability strategies, policies, and programs that reflect B. Braun’s commitment to social responsibility and environmental sustainability throughout the region.

Ms Ong Yean Ting

Head, Quality and Regulatory, Roche Diagnostics Malaysia

Yean Ting, Heads the Quality Regulatory Access and Policy team in Roche Diagnostics Malaysia. An experienced regulatory and quality professional, Yean Ting has worked across multiple segments of the healthcare industry including pharmaceutical, medical device and In-Vitro Diagnostic sector in leadership roles. Ash a professional with a progressive outlook, she has built and executed strategies to ensure regulatory and quality compliance in the organizations.

Yean Ting takes pride in being a strong industry advocate, leading the Malaysian Medical Device Association (MMDA) as Secretary to the association and representing Malaysia’s medical device stakeholders as Malaysia Representative in GHWP and holding leadership position as Co-Chair of WG5 focusing on Clinical Evidence.

She brings the industry players together to offer Malaysia’ on the industry’s latest developments and create a platform to bridge ideas and feedback between the government and the private sectors.

Yean Ting promotes, develop and establish positive culture within organizations and passionate in driving technical and profession expertise in the Medical Device industry, keeping pace with the ever-changing industry landscape.

Ms Crystal Li

Materials Director, Boston Scientific

Ms Meg Pyers

Vice President, Global Marketing, Oliver Healthcare Packaging

Meg Pyers is the Vice President of Global Marketing at Oliver Healthcare Packaging. She is responsible for product management, strategy, demand generation, pricing, and communications. With over two decades in roles of increasing responsibility, she has experience across various facets of marketing, strategy, and sales.

Prior to joining Oliver, she has worked at both large companies, including DuPont, Thermo Fisher, and Nordson as well as technology start-ups. Among her experiences, she spent four years running DuPont Tyvek’s medical packaging commercial segment.

She has a Bachelors of Arts from Lehigh University and a Masters of Business Administration from the Darden School of Business at the University of Virginia.

Dr Muralitharan Paramasua

Chief Executive

Dr. Muralitharan Paramasua, is the Chief Executive of Medical Device Authority, Ministry of Health Malaysia since 15th February 2023. Before being appointed as Chief Executive in February 2023, Dr. Muralitharan served in Ministry of Health Malaysia as an Administrative and Diplomatic Officer in various positions for 9 years.

Prior to joining MOH, Dr. Muralitharan was also once served at the Ministry of Natural Resources and Environment for 7 years from 2011 to 2017 and was responsible for international affairs of the ministry including free trade negotiations with different countries. Dr. Muralitharan earned his PhD in International Economy from University of Malaya. He received his Master’s Degree in Criminal Justice, and his Bachelor’s Degree in Biohealth Science from the University of Malaya.

Mr Dushyant Sanathara

AI Global Commercial Operations Director, BSI

Dushyant leads the global growth strategy for BSI’s AI business, with a strong focus on medical devices and digital health technologies. With 14 years at BSI, including extensive experience supporting the medical device sector, he brings a unique blend of commercial leadership, regulatory insight, and technical expertise to the evolving AI landscape.

Drawing on deep knowledge of international standards and regulatory frameworks, Dushyant works closely with manufacturers, innovators, and regulators to enable the safe, effective, and compliant adoption of AI-enabled medical devices. His work spans AI governance, risk management, software and SaMD, and regulatory readiness across global markets.

Dushyant has played a key role in positioning BSI as a trusted partner for organizations advancing next-generation medical technologies, helping them navigate the intersection of innovation, patient safety, and regulatory compliance in an increasingly data-driven healthcare ecosystem.

Mr Vishnu Vyas

AP Leader- Regulatory & Standards, DuPont™ Tyvek® Healthcare Packaging

Mr. Vishnu Vyas has spent over 20 years working in medical device industry in Regulatory, Standards and public policy function in a variety of assignments ranging from country RA head to AP regional RA. He joined DuPont in 2017 as Regulatory & Standards Leader- India/ ASEAN for DuPont Healthcare business. Vishnu is packaging expert nominee to ISO TC198/WG7 “Sterilization of Health Care Products—Packaging” (ISO 11607) representing India.

He has been an active member of RA committees of medical devices industry associations like AMMI, Malaysia; MTaI, FICCI, AMCHAM in India. He is a featured speaker at regional and international conferences and seminars on medical and pharmaceutical packaging regulatory aspects.

VANTIVE SDN BHD

B-21-3, Level 21,
The Ascent Paradigm,
No 1, Jalan SS7/26A, Kelana Jaya,
47301, Petaling Jaya, Selangor

Tel: +603-7611 6899.

Country of Origin: UK
Membership: Full
Website: https://www.vantive.asia/

ABOUT US

Vantive (formerly Baxter Kidney Care) is a standalone medical technology company in Malaysia specializing in vital organ support, including peritoneal dialysis, hemodialysis, and acute therapies.

Based in Kuala Lumpur, Vantive Sdn Bhd focuses on kidney care innovation and won the 2025 Asian Experience Awards for its sustainable “Jom Recycle” project

GT2 HEALTHCARE SDN BHD

Lot 5-3, Zon Industri Fasa 2,
Kulim Hi-Tech Park,
Kulim, 09000 Kedah

Tel: (+6012) 3760690

Country of Origin: Malaysia
Membership: Associate
Website: http://gt2healthcare.com

ABOUT US

GT2 Healthcare Sdn Bhd is a new emerging brand that aims to establish itself as a trustworthy Ethylene Oxide (ETO) sterilisation solutions, serving the medical device manufacturing industry.

Our mission is simple yet critical: to safeguard public health by ensuring the highest standards of sterilisation, compliance, and innovation. With a state-of-the-art facility, and a team of dedicated experts, we deliver sterilisation services that ensure safety, reliability, and regulatory excellence—because every product we handle has the potential to save lives.

THUNDER PRINT SDN BHD

ADDRESS
463, Lorong Ayam Didik 2,
Taman Ria Jaya Light Industrial Park
Sungai Petani, 08000 Kedah

Tel: (+6012) 9128005
Country of Origin: Malaysia
Membership: Associate
Website: https://thunderprint.com.my/

ABOUT US

Established in 1996, Thunder Print Sdn Bhd is a Malaysia-based packaging printing partner specializing in regulated and quality-sensitive industries. The company provides integrated solutions for folding cartons, labels, manuals, blister cards, and rigid boxes, serving pharmaceutical, medical device, food, cosmetics, and electronics sectors.

Operating under ISO 9001, ISO 13485, and ISO 14001 certified systems, Thunder Print ensures strict process control, traceability, and consistency. The use of FSC® certified materials supports responsible sourcing, enabling compliance with stringent regulatory and export requirements.

INEO TECH SDN BHD

ADDRESS
PT 5825, Jalan Cassia Selatan 3/11
Taman Perindustrian Batu Kawan
Bandar Cassia
14110 Penang

Tel: (604) 5882591
Country of Origin: Malaysia
Membership: Associate
Website: https://www.ineotech-my.com/

ABOUT US

Ineo Tech Sdn. Bhd. (IneoTech) is an innovation-driven material science and technology company specialising in the design, development, and manufacturing of radiation-attenuating surgical gloves and advanced polymeric barrier solutions. Founded by glove industry experts with over 50 years of combined R&D and commercial experience, we aim to create and develop new technologies to answer the unmet needs in protective wearables.

With certified facilities and a purpose-built Innovation Laboratory, IneoTech integrates proprietary material science, ethical manufacturing, and regulatory excellence to deliver next-generation medical solutions. We manufacture our gloves in compliance with ISO, EN and ASTM relevant product standards, using a bespoke production platform equipped with the latest technical innovations. Our Quality Management System is certified to ISO 13485 and ISO 9001, as well as compliant with other relevant country-specific QMS regulations.

IneoTech specialises in developing sustainable, cost-effective advanced gloving solutions with enhanced safety and performance in 2 main areas:

YTY INDUSTRY SDN BHD

ADDRESS
Lot 1422 – 1424
Batu 10, Lekir, Sitiawan
32000 Perak

Tel: (605) 6908500
Country of Origin: Malaysia
Membership: Associate
Website: https://www.ytygroup.com.my/

ABOUT US

Since our establishment in 1988, YTY has emerged as a leading supplier of single-use examination gloves. Our dedicated vision to achieving process and product excellence, increasing automation in manufacturing, and providing world-class customer service has made us one of the most respected single-use examination glove manufacturers in the industry today.

FEDERAL PACKAGES SDN BHD

ADDRESS
391, Jalan Tasek
14120 Simpang Ampat
Simpang Ampat
14120 Penang

Tel: (604) 5458142
Country of Origin: Malaysia
Membership: Associate
Website: www.muda.com

ABOUT US

Established in 1973 in Penang, Federal Packages Sdn Bhd is a pioneer paper packaging manufacturer and a member of the Muda Holdings Group. The company produces corrugated boards, boxes, and multi-wall paper bags for electronics, food, and industrial markets.

The Association of Malaysian Medical Industries (AMMI) consists of leading medical device manufacturing companies in the medical technology industry.

26 -28 August 2026: AMMI at IMDEC

YB Tuan Haji Akmal Nasrullah bin Mohd Nasir, Minister of Economy

26 Aug 2026: AMMI@IMDEC Day 1

27 Aug 2028: AMMI@IMDEC Day 2

28 August 2026: AMMI@IMDEC Day 3

WP Popups

JLL Malaysia Sdn Bhd

Andy Lee Kuan Min

Dato’ Loo Lee Lian

Mr Samuel Pooranakaran

Mr Amirul Haqiem

Mr HT Eow

Ms Ong Yee Ting

Mr Thierry Wagner

Ms Marinela Cebic

Dr Brian McEvoy

LANCO INTEGRATED (MALAYSIA) SDN BHD

MUN GLOBAL SDN BHD

HARLEIGH (MALAYSIA) SDN BHD

Mr Frederic Rebetez

Ms Tan Lin Im

Mr. Samuel Pooranakaran

Mr JC Guillou

Dr Ng Tian Wei

Ms Tatiana Dias

Mr. Graham Rice

Ms Ong Yean Ting

Ms Crystal Li

Ms Meg Pyers

Dr Muralitharan Paramasua

Mr Dushyant Sanathara

Mr Vishnu Vyas

VANTIVE SDN BHD

GT2 HEALTHCARE SDN BHD

THUNDER PRINT SDN BHD

INEO TECH SDN BHD

IneoTech specialises in developing sustainable, cost-effective advanced gloving solutions with enhanced safety and performance in 2 main areas:

YTY INDUSTRY SDN BHD

FEDERAL PACKAGES SDN BHD